The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Influence of chitosan addition on the mechanical and antibacterial properties of carrot cellulose nanofibre film
Abstract
Films of carrot cellulose nanofibrils (CCNFs) with the addition of low-viscosity chitosan (CHIT) were prepared by the vacuum filtration. The chitosan content in the films varied from 9 to 33% (dry wt. basis). The surface morphology of the films was investigated by scanning electron microscopy, and it was found that chitosan was dispersed in the CCNF matrix. The interaction between CCNFs and CHIT was evaluated in terms of Fourier transform infrared spectroscopy (FTIR). The obtained results suggested physical interactions rather than hydrogen bonding between CCNFs and CHIT. This finding also supports the results of the water wettability experiment. The addition of chitosan to the nanocellulose matrix causes an increase in the water contact angle, i.e., the surface of the composites becomes more hydrophobic. This increase is probably connected to an interaction between nanocellulose and chitosan forming a denser structure. Analyses of thermal properties showed that the composites are stable under high temperature, and the degradation occurred above 300 °C. It was found that the addition of CHIT to CCNF matrices caused a decrease in the Young’s modulus—the higher that the concentration of chitosan in the composite was, the lower the Young’s modulus (decreased from 14.71 GPa for CCNFs to 8.76 GPa for CCNF/CHIT_5). Additionally, the tensile strength of composites, i.e., the maximum force that causes a fracture decreased after the addition of chitosan (decreased from 145.83 MPa for CCNFs to 129.43 MPa for CCNF/CHIT_5). The results indicated the highest inhibitory effect of the investigated composites against E. coli and S. epidermidis. Whereas M. luteus was inhibited only by the higher concentration of chitosan in the tested composites, inhibition was not found against C. krissii and all tested filamentous fungi. Graphic abstract:
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Blending cellulose with CS improved the porosity of CS film [26,28,51,53,54].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [51]
In the citing paper
“It was observed that SEM of CS/0.25 g Cel demonstrated a rough surface with dense granules that appeared structured in lower magnification (50,000×), which makes the CS film loosely packed [28,51,54,55].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [51]
In the citing paper
“The figure shows a relatively smooth, homogeneous, dense, and uniform planar structure without pores or cracks [5], indicating good structural integrity due to the semi-crystalline nature of chitosan [5,26,30,51,52,53].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [51]
In the citing paper
“Blending with Cel increases the water resistance and the thermal stability of CS films, and this will increase the tensile strength and the elongation at break [51].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [51]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Badawy, M. E. I., & Rabea, E. I. (2009) · Postharvest Biology and Technology · doi:10.1016/j.postharvbio.2008.05.018 · Cited by 269
Tran, C. D., Duri, S., Delneri, A., & Franko, M. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.02.046 · Cited by 121 · cited 2×
“unfortunately results in high-cost material (AboElseoud et al. 2018; Hassan et al. 2011, 2016; Trana et al. 2013).”
Background
Research works printed but not linked: 61
- Abdul Khalil HPS, Saurabh CK, Adnan AS, Nurul Fazita MR, Syakir MI, Davoudpour Y, Rafatullah M, Abdullah CK, Haafiz MKM, Dungani R (2016) A review on chitosan–cellulose blends and nanocellulose reinforced chitosan biocomposites: properties and their applications. Carbohydr Polym 150:216–226 · DOI · Paper page
- Abo-Elseoud WS, Hassan ML, Sabaa MW, Basha M, Hassan EA, Fadel SM (2018) Chitosan nanoparticles/cellulose nanocrystals nanocomposites as a carrier system for the controlled release of repaglinide. Int J Biol Macromol 111:604–613 · DOI
- Alemdar A, Sain M (2008) Isolation and characterization of nanofibers from agricultural residues-wheat straw and soy hulls. Bioresour Technol 99:1664–1671 · DOI · Paper page
- Ämmälä A, Liimatainen H, Burmeister C, Niinimäki J (2013) Effect of TEMPO and periodate-chlorite oxidized nanofibrils on ground calcium carbonate flocculation and retention in sheet forming and on the physical properties of sheets. Cellulose 20:2451–2460 · DOI
- Azeredoa HMC, Rosaa MF, Mattoso LHC (2017) Nanocellulose in bio-based food packaging applications. Ind Crops Prod 97:664–671 · DOI · Paper page
- Benhabiles MS, Salah R, Lounici H, Drouiche N, Goosen MFA, Mameri N (2012) Antibacterial activity of chitin, chitosan and its oligomers prepared from shrimp shell waste. Food Hydrocoll 29:48–56 · DOI · Paper page
- Brinchia L, Cotana F, Fortunati E, Kenny JM (2013) Production of nanocrystalline cellulose from lignocellulosic biomass: technology and applications. Carbohydr Polym 94:154–169 · DOI · Paper page
- Chen Y (2017) Preparation and application of the composite of chitosan. In: Thakur VK, Thakur MK, Kessler MR (eds) Handbook of composites from renewable materials, structure and chemistry, vol 1. Wiley, New York, pp 371–433
- Chen W, Yu H, Liu Y, Chen P, Zhang M, Hai Y (2011) Individualization of cellulose nanofibers from wood using high-intensity ultrasonication combined with chemical pretreatments. Carbohydr Polym 83:1804–1811 · DOI · Paper page
- de Alvarenga ES (2011) Characterization and properties of chitosan. In: Elnashar M (ed) Biotechnology of biopolymers. InTech, Rijeka, pp 91–108
- de Mesquita JP, Donnici CL, Pereira FV (2010) Biobased nanocomposites from layer- by-layer assembly of cellulose nanowhiskers with chitosan. Biomacromolecules 11(2):473–480 · DOI · Paper page
- de Souza Costa Júnior E, Pereira MM, Mansur HS (2009) Properties and biocompatibility of chitosan films modified by blending with PVA and chemically crosslinked. J Mater Sci Mater Med 20:553–561 · DOI · Paper page
- Dehnad D, Mirzaei H, Emam-Djomeh Z, Jafari S-M, Dadash S (2014) Thermal and antimicrobial properties of chitosan–nanocellulose films for extending shelf life of ground meat. Carbohydr Polym 109:148–154 · DOI
- Deng Z, Jung J, Zhao Y (2017) Development, characterization, and validation of chitosan adsorbed cellulose nanofiber (CNF) films as water resistant and antibacterial food contact packaging. LWT Food Sci Technol 83:132–140 · DOI
- Dimzon IKD, Knepper TP (2015) Degree of deacetylation of chitosan by infrared spectroscopy and partial least squares. Int J Biol Macromol 72:939–945 · DOI · Paper page
- Dufresne A (2012) Cellulose and potential reinforcement. In: Dufresne A (ed) Nanocellulose: from nature to high performance tailored materials. De Gruyter, Berlin, pp 1–37 · DOI · Paper page
- Dutta PK, Tripathi S, Mehrotra GK, Dutta J (2009) Perspectives for chitosan based antimicrobial films in food applications. Food Chem 114:1173–1182 · DOI · Paper page
- Elsabee MZ, Abdou ES (2013) Chitosan based edible films and coatings: a review. Mater Sci Eng C 33:1819–1841 · DOI · Paper page
- Falamarzpour P, Behzad T, Zamani A (2017) Preparation of nanocellulose reinforced chitosan films, cross-linked by adipic acid. Int J Mol Sci 18:396 · doi:10.3390/ijms18020396
- Fernandes SCM, Freire CSR, Silvestre AJD, Pascoal Neto C, Gandini A, Berglund L, Salmén L (2010) Transparent chitosan films reinforced with a high content of nanofibrillated cellulose. Carbohydr Polym 81:394–401 · DOI · Paper page
- Gooday GW (1990) Physiology of microbial degradation of chitin and chitosan. Biodegradation 1:177–190 · DOI · Paper page
- Hänninen A, Sarlin E, Lyyra I, Salpavaara T, Kellomäki M, Tuukkanen S (2018) Nanocellulose and chitosan based films as low cost, green piezoelectric materials. Carbohydr Polym 202:418–424 · DOI · Paper page
- Hassan ML, Hassan EA, Oksman KN (2011) Effect of pretreatment of bagasse fibers on the properties of chitosan/microfibrillated cellulose nanocomposites. J Mater Sci 46:1732–1740 · DOI
- Hassan EA, Hassan ML, Abou-zeid RE, El-Wakil NA (2016) Novel nanofibrillated cellulose/chitosan nanoparticles nanocomposites films and their use for paper coating. Ind Crops Prod 93:219–226 · DOI
- Hosseinnejad M, Jafari SM (2016) Evaluation of different factors affecting antimicrobial properties of chitosan. Int J Biol Macromol 85:467–475 · DOI · Paper page
- Hu CX, Yang G, Zhang Q, Chen F, Fu Q (2015) Mechanically reinforced chitosan/cellulose nanocrystals composites with good transparency and biocompatibility. Chin J Polym Sci 33(1):61–69 · doi:10.1007/s10118-015-1558-6
- Jia Y, Wang X, Huo M, Zhai X, Li F, Zhong C (2017) Preparation and characterization of a novel bacterial cellulose/chitosan bio-hydrogel. Nanomater Nanotechnol 7:1–8
- Khan RA, Salmieri S, Dussault D, Calderon JU, Kamal MR, Safrany A, Lacroix M (2010) Production and properties of nanocellulose reinforced methylcellulose based biodegradable films. J Agric Food Chem 58(13):7878–7885 · DOI · Paper page
- Khan A, Khan RA, Salmieri S, Le TC, Riedl B, Bouchard J, Chauve G, Tan V, Kamal MR, Lacroix M (2012) Mechanical and barrier properties of nanocrystalline cellulose reinforced chitosan based nanocomposite films. Carbohydr Polym 90(4):1601–1608 · DOI · Paper page
- Kim KW, Min BJ, Kim Y-T, Kimmel RM, Cooksey K, Park SI (2011) Antimicrobial activity against foodborne pathogens of chitosan biopolymer films of different molecular weights. LWT Food Sci Technol 44(2):565–569 · DOI
- Klemm D, Kramer F, Moritz S, Lindström T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50(24):5438–5466 · DOI · Paper page
- Kong M, Chen XG, Xing K, Park HJ (2010) Antimicrobial properties of chitosan and mode of action: a state of the art review. Int J Food Microbiol 144:51–63 · DOI · Paper page
- Krishna Rao KSV, Vijaya Kumar Naidu B, Subha MCS, Sairam M, Aminabhavi TM (2006) Novel chitosan based pH sensitive interpenetrating network microgels for the controlled release of cefadroxil. Carbohydr Polym 66:333–344 · DOI
- Lavoine N, Desloges I, Dufresne A (2012) Microfibrillated cellulose—its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90:735–764 · DOI · Paper page
- Leceta I, Guerrero P, Ibarburu I, Dueñas MT, De la Caba K (2013) Characterization and antimicrobial analysis of chitosan-based films. J Food Eng 116:889–899 · DOI · Paper page
- Li Q, Renneckar S (2011) Supramolecular structure characterization of molecularly thin cellulose I nanoparticles. Biomacromolecules 12:650–659 · DOI · Paper page
- Li Q, Zhou JP, Zhang LN (2009) Structure and properties of the nanocomposite films of chitosan reinforced with cellulose whiskers. J Polym Sci Polym Phys 47:1069–1077 · DOI · Paper page
- Li X, Shi X, Wang M, Du Y (2011) Xylan chitosan conjugate—a potential food preservative. Food Chem 126(2):520–525 · DOI
- Liu B, Zhang J, Liu L, Hotchkiss AT (2012) Utilization of pectin extracted sugar beet pulp for composite application. J Biobased Mater Bioenergy 6:185–192
- Moon RJ, Martini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941–3994 · DOI · Paper page
- Nada AMA, Hassan ML (2000) Thermal behaviour of cellulose and some cellulose derivatives. Polym Degrad Stab 67:111–115 · DOI
- Nidheesh T, Kumar PG, Suresh PV (2015) Enzymatic degradation of chitosan and production of d-glucosamine by solid substrate fermentation of exo-β-d-glucosaminidase (exochitosanase) by Penicillium decumbens CFRNT15. Int Biodeterior Biodegrad 97:97–106 · DOI
- Niu X, Liu Y, Song Y, Han J, Pan H (2018) Rosin modified cellulose nanofiber as a reinforcing and co-antimicrobial agents in polylactic acid/chitosan composite film for food packaging. Carbohydr Polym 183:102–109 · DOI · Paper page
- Ostadhossein F, Mahmoudi N, Morales-Cid G, Tamjid E, Navas-Martos FJ, Soriano-Cuadrado B, Paniza JML, Simchi A (2015) Development of chitosan/bacterial cellulose composite films containing nanodiamonds as a potential flexible platform for wound dressing. Materials 8:6401–6418 · DOI
- Poonguzhali R, Basha SK, Kumari VS (2017) Synthesis and characterization of chitosan–PVP–nanocellulose composites for in vitro wound dressing application. Int J Biol Macromol 105:111–120 · doi:10.1016/j.ijbiomac.2017.07.006
- Rahmi L, Julinawati S (2017) Preparation of chitosan composite film reinforced with cellulose isolated from oil palm empty fruit bunch and application in cadmium ions removal from aqueous solutions. Carbohydr Polym 170:226–233 · DOI
- Rambabu N, Panthapulakkal S, Sain M, Dalai AK (2016) Production of nanocellulose fibers from pinecone biomass: evaluation and optimization of chemical and mechanical treatment conditions on mechanical properties of nanocellulose films. Ind Crops Prod 83:746–754 · DOI · Paper page
- Schillinger U, Lücke F-K (1989) Antibacterial activity of Lactobacillus sake isolated from meat. Appl Environ Microb 55:1901–1906 · DOI · Paper page
- Stark NM (2016) Opportunities for cellulose nanomaterials in packaging films: a review and future trends. J Renew Mater 4(5):313–326 · DOI
- Szymańska-Chargot M, Zdunek A (2013) Use of FT-IR Spectra and PCA to the bulk characterization of cell wall residues of fruits and vegetables along a fraction process. Food Biophys 8(1):29–42 · DOI · Paper page
- Szymańska-Chargot M, Cybulska J, Zdunek A (2011) Sensing the structural differences in cellulose from apple and bacterial cell wall materials by Raman and FT-IR spectroscopy. Sensors 11:5543–5560 · DOI · Paper page
- Szymańska-Chargot M, Chylińska M, Gdula K, Kozioł A, Zdunek A (2017) Isolation and characterization of cellulose from different fruit and vegetable pomaces. Polymers 9:495 · DOI · Paper page
- Szymańska-Chargot M, Cieśla J, Chylińska M, Gdula K, Pieczywek PM, Kozioł A, Cieślak KJ, Zdunek A (2018) Effect of ultrasonication on physicochemical properties of apple based nanocellulose-calcium carbonate composites. Cellulose 25:4603–4621 · DOI
- Szymańska-Chargot M, Chylińska M, Pieczywek PM, Zdunek A (2019) Tailored nanocellulose structure depending on the origin. Example of apple parenchyma and carrot root celluloses. Carbohydr Polym 210:186–195 · doi:10.1016/j.carbpol.2019.01.070
- Tangpasuthadol V, Pongchaisirikul N, Hoven VP (2003) Surface modification of chitosan films: effects of hydrophobicity on protein adsorption. Carbohydr Res 338(9):937–942 · DOI · Paper page
- Toivonen MS, Kurki-Suonio S, Schacher FH, Hietala S, Rojas OJ, Ikkala O (2015) Water-resistant, transparent hybrid nanopaper by physical cross-linking with chitosan. Biomacromolecules 16:1062–1071 · DOI
- Verlee A, Mincke S, Stevens CV (2017) Recent developments in antibacterial and antifungal chitosan and its derivatives. Carbohydr Polym 164:268–283 · DOI · Paper page
- Wang W, Sabo RC, Mozuch MD, Kersten P, Zhu J, Jin Y (2015) Physical and mechanical properties of cellulose nanofibril films from bleached eucalyptus pulp by endoglucanase treatment and microfluidization. J Polym Environ 23:551–558 · DOI
- Wu T, Farnood R, O’Kelly K, Chen B (2014) Mechanical behaviour of transparent nanofibrillar cellulose–chitosan nanocomposite films in dry and wet conditions. J Mech Behav Biomed 32:279–286 · DOI
- Zhang H, Neau SH (2001) In vitro degradation of chitosan by a commercial enzyme preparation: effect of molecular weight and degree of deacetylation. Biomaterials 22:1653–1658 · DOI · Paper page
- Zhbankov RG, Firsov SP, Buslov DK, Nikonenko NA, Marchewka MK, Ratajczak H (2002) Structural physico-chemistry of cellulose macromolecules. Vibrational spectra and structure of cellulose. J Mol Struct 614:117–125 · doi:10.1016/s0022-2860(02)00252-1
Cited by
Progress and prospects in chitosan derivatives: Modification strategies and medical applications
Ding, S., Wang, Y., Li, J., & Chen, S. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.12.008 · Cited by 92
Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin
Madian, N. G., El-Ashmanty, B. A., & Abdel-Rahim, H. K. (2023) · Polymers · doi:10.3390/polym15122587 · Cited by 66
Metadata
- Authors
- Szymańska-Chargot, M., Chylińska, M., Pertile, G., Pieczywek, P. M., Cieślak, K. J., Zdunek, A., & Frąc, M.
- Venue
- Cellulose
- Published
- 2019-09-18
- Volume
- 26
- Issue
- 18
- Pages
- 9613-9629
- ISSN
- 0969-0239
- 1572-882X
- Cited by
- 59
- References
- 2
- Language
- en
- Licence
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Funders
- National Centre for Research and Development–Poland (LIDER/300/L-6/14/NCBR/2015)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of chitosan addition on the mechanical and antibacterial properties of carrot cellulose nanofibre film. https://app.cochat.ai/papers/10.1007/s10570-019-02755-9
- The paper
- Szymańska-Chargot, M., Chylińska, M., Pertile, G., Pieczywek, P. M., Cieślak, K. J., Zdunek, A., & Frąc, M. (2019). Influence of chitosan addition on the mechanical and antibacterial properties of carrot cellulose nanofibre film. Cellulose. https://doi.org/10.1007/s10570-019-02755-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.