Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.

Preparation of medical Mg–Zn alloys and the effect of different zinc contents on the alloy

Open access
Hu, Yunpeng, Guo, Xuan, Qiao, Yang, Wang, Xiangyu, Lin, Qichao · 2022 · Journal of Materials Science Materials in Medicine

Abstract

In recent years, along with the development and application of magnesium alloys, magnesium alloys have been widely used in automotive, aerospace, medicine, sports, and other fields. In the field of medical materials, magnesium not only has the advantage of light weight, high strength, and a density similar to that of human bone, but also has good biocompatibility and promotes the growth of human bone. However, the mechanical properties and corrosion resistance of magnesium alloys need to be further improved to meet the requirements for human biodegradable implants. In this study, three alloys (mass fractions: Mg–10Zn, Mg–20Zn, and Mg–30Zn (wt.%)) were prepared using powder metallurgy by homogeneously mixing powders of the above materials in a certain amount with magnesium as the substrate through the addition of zinc elements, which also have good biocompatibility. The effect of zinc on the microstructure, mechanical properties, wear performance, and corrosion resistance of magnesium–zinc alloys was studied when the zinc content was different. The results show that compared with the traditional magnesium alloy using powder metallurgy, prepared magnesium alloy has good resistance to compression and bending, its maximum compressive stress can reach up to 318.96 MPa, the maximum bending strength reached 189.41 MPa, and can meet the mechanical properties of the alloy as a human bone-plate requirements. On the polarization curve, the maximum positive shift of corrosion potential of the specimens was 73 mv and the maximum decrease of corrosion-current density was 53.2%. From the comparison of the above properties, it was concluded that the three prepared alloys of which Mg–20% Zn had the best overall performance. Its maximum compressive stress, maximum bending strength, and corrosion-current density reached 318.96 MPa, 189.41 MPa and 2.08 × 10−5 A·cm−2 respectively, which are more suitable for use as human implant bone splints in human-body fluid environment.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s10856-021-06637-0

Cites

23 of 23 references verified0 citation errors · 0 not checkable

Statistics

Figures

The mechanical properties of the sintered Mg–Zn alloys were analyzed using powder-metallurgy techniques, and their microstructure, micromotion wear properties, electrochemical corrosion properties and composition of the physical phases were analyzed and discussed.
The mechanical properties of the sintered Mg–Zn alloys were analyzed using powder-metallurgy techniques, and their microstructure, micromotion wear properties, electrochemical corrosion properties and composition of the physical phases were analyzed and discussed.CC BY · PubMed Central
Fig. 1 Alloy-powder thermal-stability analysis curve
Fig. 1 Alloy-powder thermal-stability analysis curveCC BY · PubMed Central
Fig. 2 Mg–zn alloy sintering process curve
Fig. 2 Mg–zn alloy sintering process curveCC BY · PubMed Central
Fig. 3 Original powder morphology of Mg–Zn material (a Mg powder, b Zn powder)
Fig. 3 Original powder morphology of Mg–Zn material (a Mg powder, b Zn powder)CC BY · PubMed Central
Fig. 4 Magnesium- and zinc-mixed powder
Fig. 4 Magnesium- and zinc-mixed powderCC BY · PubMed Central
Fig. 5 Hot press sintered formed Mg–Zn alloy (a Mg-10% Zn b Mg-20% Zn c Mg-30% Zn)
Fig. 5 Hot press sintered formed Mg–Zn alloy (a Mg-10% Zn b Mg-20% Zn c Mg-30% Zn)CC BY · PubMed Central
Fig. 6 Hardness values of magnesium and zinc alloys
Fig. 6 Hardness values of magnesium and zinc alloysCC BY · PubMed Central
Fig. 7 Maximum bending strength of Mg–Zn alloy
Fig. 7 Maximum bending strength of Mg–Zn alloyCC BY · PubMed Central
Fig. 8 Maximum compressive stress of Mg–Zn alloy
Fig. 8 Maximum compressive stress of Mg–Zn alloyCC BY · PubMed Central
Fig. 9 Cross-sectional morphology of Mg–Zn alloy (a Mg–10%Zn, b Mg–20%Zn, c Mg–30%Zn)
Fig. 9 Cross-sectional morphology of Mg–Zn alloy (a Mg–10%Zn, b Mg–20%Zn, c Mg–30%Zn)CC BY · PubMed Central
Fig. 10 Three-point bending-test fracture morphology
Fig. 10 Three-point bending-test fracture morphologyCC BY · PubMed Central
Fig. 11 Magnesium and zinc alloy physical-phase analysis
Fig. 11 Magnesium and zinc alloy physical-phase analysisCC BY · PubMed Central
Fig. 12 Electrochemical corrosion of Mg–Zn alloy
Fig. 12 Electrochemical corrosion of Mg–Zn alloyCC BY · PubMed Central
Fig. 13 Friction-coefficient curve under different zinc content
Fig. 13 Friction-coefficient curve under different zinc contentCC BY · PubMed Central
Fig. 14 Fretting-wear morphology of magnesium–zinc alloy
Fig. 14 Fretting-wear morphology of magnesium–zinc alloyCC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 23 references

Research works printed but not linked: 1

  1. Zhang S, Zhang X, Zhao C, Li J, Yang S, Xie C, Tao H, Yan Z, He Y, Yao J. Research on an Mg-Zn alloy as a degradable biomaterial. Acta Biomater. 2010;6:626e640. https://doi.org/10.1016/j.actbio.2009.06.028. · DOI · Paper page

Cited by

See all 61

Metadata

Authors
Hu, Y., Guo, X., Qiao, Y., Wang, X., & Lin, Q.
Affiliations
University of Jinan (CN)
Corresponding author
Qiao, Yang
Venue
Journal of Materials Science Materials in Medicine
Published
2022-01
Volume
33
Issue
1
Pages
9-9
ISSN
  • 0957-4530 (ISSN-L)
  • 1573-4838
OpenAlex
W4205671736
Cited by
61
References
23
Citations by year
2026: 13 · 2025: 13 · 2024: 13 · 2023: 14 · 2022: 8
FWCI
3.00
Type
journal article
Language
en
Open access
Licence
Locations
  • Journal of Materials Science Materials in Medicine (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Natural Science Foundation of Shandong Province ((ZR2019QEE032))
  • Shandong Higher Education Youth Innovation Technology Support Program ((2019KJB021))
Topics
  • Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
  • Physical Sciences › Materials Science › Materials Chemistry › Titanium Alloys Microstructure and Properties
  • Health Sciences › Nursing › Nutrition and Dietetics › Magnesium in Health and Disease
Keywords
Mg-Zn alloys, zinc content, biodegradable implants, bone plates, powder metallurgy, corrosion resistance, mechanical properties, wear behavior, microstructure, biocompatibility, magnesium alloys
MeSH terms
Bone-Implant Interface, Alloys, Biocompatible Materials, Biomechanical Phenomena, Corrosion, Hardness Tests, Humans, Magnesium, Materials Testing, Metallurgy, Surface Properties, X-Ray Diffraction, Zinc, Compressive Strength, Absorbable Implants

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Preparation of medical Mg–Zn alloys and the effect of different zinc contents on the alloy. https://app.cochat.ai/papers/10.1007/s10856-021-06637-0
The paper
Hu, Y., Guo, X., Qiao, Y., Wang, X., & Lin, Q. (2022). Preparation of medical Mg–Zn alloys and the effect of different zinc contents on the alloy. Journal of Materials Science Materials in Medicine. https://doi.org/10.1007/s10856-021-06637-0

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.