Effect of Microalgae (Arthrospira platensis and Chlorella vulgaris) Addition on 3D Printed Cookies
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Rheological and textural characteristics of cookie doughs were measured to characterise the effect of two microalgae biomasses additions ( Arthrospira platensis and Chlorella vulgaris ) in 3D printed cookies. The rheological characteristics determined the addition of microalgae lead to a greater mechanical resistance and a predominance of the elastic component ahead of the viscous component, this behaviour was confirmed by the textural analysis that showed a greater force for the extrusion of microalgae-enriched doughs. Besides, the influence of processing parameters, including filament diameter (26 and 27 mm) and layer height (1.3 and 1.5 mm), on the geometric accuracy of a 3D printed food structure made of cookie dough before and after baking process, was evaluated. The addition of microalgae biomass in dough, for 3D printed cookies, improves the printability in terms of dimensional properties, achieving 3D structures more stable and resistant to baking.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
Microalgae as versatile cellular factories for valued products
Koller, M., Muhr, A., & Braunegg, G. (2014) · Algal Research · doi:10.1016/j.algal.2014.09.002 · Cited by 639
An Overview of 3D Printing Technologies for Food Fabrication
Sun, J., Zhou, W., Huang, D., Fuh, J. Y. H., & Hong, G. S. (2015) · Food and Bioprocess Technology · doi:10.1007/s11947-015-1528-6 · Cited by 549
Innovative natural functional ingredients from microalgae
Plaza, M., Herrero, M., Cifuentes, A., & Ibáñez, E. (2009) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf901070g · Cited by 509
Comparison of microalgal biomass profiles as novel functional ingredient for food products
Batista, A. P., Gouveia, L., Bandarra, N. M., Franco, J. M., & Raymundo, A. (2013) · Algal Research · doi:10.1016/j.algal.2013.01.004 · Cited by 450
Batista, A. P., Niccolai, A., Fradinho, P., Fragoso, S., Bursic, I., Rodolfi, L., Biondi, N., Tredici, M. R., Sousa, I., & Raymundo, A. (2017) · Algal Research · doi:10.1016/j.algal.2017.07.017 · Cited by 407
Microalgae as Healthy Ingredients for Functional Food: A Review
Matos, J., Cardoso, C., Bandarra, N. M., & Afonso, C. (2017) · Food & Function · doi:10.1039/c7fo00409e · Cited by 393
Microalgae as Sources of High Added-Value Compounds—A Brief Review of Recent Work
Guedes, A. C., Amaro, H. M., & Malcata, F. X. (2011) · Biotechnology Progress · doi:10.1002/btpr.575 · Cited by 348
Severini, C., Azzollini, D., Albenzio, M., & Derossi, A. (2018) · Food Research International · doi:10.1016/j.foodres.2018.01.034 · Cited by 293
Dick, A., Bhandari, B., & Prakash, S. (2019) · Meat Science · doi:10.1016/j.meatsci.2019.03.005 · Cited by 264
Cited by
Microalgae-based products: Food and public health
Ferreira de Oliveira, A. P., & Bragotto, A. P. A. (2022) · Future Foods · doi:10.1016/j.fufo.2022.100157 · Cited by 190
Microalgae proteins as sustainable ingredients in novel foods: recent developments and challenges
Mosibo, O. K., Ferrentino, G., & Udenigwe, C. C. (2024) · Foods · doi:10.3390/foods13050733 · Cited by 140
“Extruded products have also been explored for the utilization of microalgae [100–104].”
BackgroundLetras, P., Oliveira, S., Varela, J., Nunes, M. C., & Raymundo, A. (2022) · Algal Research · doi:10.1016/j.algal.2022.102863 · Cited by 73
“Past studies revealed similar results where an increase in viscosity values was correlated with higher levels of microalgal biomass incorporation, which was also attributed to the protein, polysaccharide, and fiber contents of the samples, since these molecules have a high-water retention capacity, consequently increa…”
BackgroundResultInfluentialAbedini, A., Sohrabvandi, S., Sadighara, P., Hosseini, H., Farhoodi, M., Assadpour, E., Alizadeh Sani, M., Zhang, F., Seyyedi-Mansour, S., & Jafari, S. M. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103181 · Cited by 71
New Trends in Biotechnological Applications of Photosynthetic Microorganisms
Dawiec-Liśniewska, A., Podstawczyk, D., Bastrzyk, A., Czuba, K., Pacyna-Iwanicka, K., Okoro, O. V., & Shavandi, A. (2022) · Biotechnology Advances · doi:10.1016/j.biotechadv.2022.107988 · Cited by 66
Metadata
- Authors
- Uribe-Wandurraga, Z. N., Igual, M., Reino-Moyón, J., García-Segovia, P., & Martínez-Monzó, J.
- Venue
- Food Biophysics
- Published
- 2020-07-21
- Volume
- 16
- Issue
- 1
- Pages
- 27-39
- ISSN
- 1557-1858 (ISSN-L)
- 1557-1866
- OpenAlex
- W3043874153
- Cited by
- 84
- References
- 13
- FWCI
- 2.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Microalgae (Arthrospira platensis and Chlorella vulgaris) Addition on 3D Printed Cookies. https://app.cochat.ai/papers/10.1007/s11483-020-09642-y
- The paper
- Uribe-Wandurraga, Z. N., Igual, M., Reino-Moyón, J., García-Segovia, P., & Martínez-Monzó, J. (2021). Effect of Microalgae (Arthrospira platensis and Chlorella vulgaris) Addition on 3D Printed Cookies. Food Biophysics. https://doi.org/10.1007/s11483-020-09642-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.