The DOI matches its Crossref record.
Modernizing Pharmaceutical Manufacturing: from Batch to Continuous Production
Open accessAbstract
The Food and Drug Administration (FDA) regulates pharmaceutical drug products to ensure a continuous supply of high-quality drugs in the USA. Continuous processing has a great deal of potential to address issues of agility, flexibility, cost, and robustness in the development of pharmaceutical manufacturing processes. Over the past decade, there have been significant advancements in science and engineering to support the implementation of continuous pharmaceutical manufacturing. These investments along with the adoption of the quality-by-design (QbD) paradigm for pharmaceutical development and the advancement of process analytical technology (PAT) for designing, analyzing, and controlling manufacturing have progressed the scientific and regulatory readiness for continuous manufacturing. The FDA supports the implementation of continuous manufacturing using science- and risk-based approaches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 28
- Myerson AS, Krumme M, Nasr M, Thomas H, Braatz RD. Control systems engineering in continuous pharmaceutical manufacturing May 20–21, 2014 continuous manufacturing symposium. J Pharm Sci. 2014. doi: 10.1002/jps.24311 . · DOI
- Felder RM, Rousseau RW. Elementary principles of chemical processes. US: Wiley; 2005.
- Allison G, Cain YT, Cooney C, Garcia T, Bizjak TG, Holte O, et al. Regulatory and quality considerations for continuous manufacturing. May 20–21, 2014 continuous manufacturing symposium. J Pharm Sci. 2015. doi: 10.1002/jps.24324 . · DOI · Paper page
- Mascia S, Heider PL, Zhang H, Lakerveld R, Benyahia B, Barton PI, et al. End-to-end continuous manufacturing of pharmaceuticals: integrated synthesis, purification, and final dosage formation. Angew Chem Int Ed. 2013;52:12359–63. · DOI · Paper page
- Malet-Sanz L, Susanne F. Continuous flow synthesis: a pharma perspective. J Med Chem. 2012;55:4062–98. · DOI · Paper page
- Schaber SD, Gerogiorgis DI, Ramachandran R, Evans JM, Barton PI, Trout BL. Economic analysis of integrated continuous and batch pharmaceutical manufacturing: a case study. Ind Eng Chem Res. 2011;50:10083–92. · DOI · Paper page
- Poechlauer P, Manley J, Broxterman R, Gregertsen B, Ridemark M. Continuous processing in the manufacture of active pharmaceutical ingredients and finished dosage forms: an industry perspective. Org Proc Res Dev. 2012;16:1586–90. · doi:10.1021/op300159y
- Webb D, Jamison TF. Continuous flow multi-step organic synthesis. Chem Sci. 2010;1(6):675–80. · DOI · Paper page
- Chen J, Sarma B, Evans JM, Myerson AS. Pharmaceutical crystallization. Crystal Growth Des. 2011;11:887–95. · doi:10.1021/cg101556s
- Byrn S, Futran M, Thomas H, Jayjock E, Maron N, Meyer RF, et al. Achieving continuous manufacturing for final dosage formation: challenges and how to meet them. May 20–21, 2014 continuous manufacturing symposium. J Pharm Sci. 2014. doi: 10.1002/jps.24247 . · doi:10.1002/jps.24247
- Badman C, Trout BL. Achieving continuous manufacturing. May 20–21, 2014 continuous manufacturing symposium. J Pharm Sci. 2014. doi: 10.1002/jps.24246 . · doi:10.1002/jps.24246
- Boukouvala F, Niotis V, Ramachandran R, Muzzio F, Ierapetritou MG. An integrated approach for dynamic flowsheet modeling and sensitivity analysis of a continuous tablet manufacturing process. Comput Chem Eng. 2012;42:30–47. · DOI · Paper page
- Benyahia B, Lakerveld R, Barton PI. A plant-wide dynamic model of a continuous pharmaceutical process. Ind Eng Chem Res. 2012;51:15393–412. · doi:10.1021/ie3006319
- Lakerveld R, Benyahia B, Braatz RD, Barton PI. Model-based design of a plant-wide control strategy for a continuous pharmaceutical plant. AIChE J. 2013;59:3671–85. · DOI
- Kvarnstrom B, Bergquist B. Improving traceability in continuous processes using flow simulations. Prod Plan Control. 2012;23:396–404. · doi:10.1080/09537287.2011.561813
- Gao YJ, Vanarase A, Muzzio FJ, Ierapetritou M. Characterizing continuous powder mixing using residence time distribution. Chem Eng Sci. 2011;66:417–25. · DOI
- Reitz E, Podhaisky H, Ely D, Thommes M. Residence time modeling of hot melt extrusion processes. Eur J Pharm Biopharm. 2013;85:1200–5. · DOI
- Moe T. Perspectives on traceability in food manufacture. Trends Food Sci Tech. 1998;9:211–4. · DOI · Paper page
- ICH Q8. ICH Harmonised Tripartite Guideline: Pharmaceutical Development Q8(r2), Current Step 4 Version. Geneva, Switzerland: The International Conference on Harmonisation; 2009.
- Yu LX, Amidon G, Khan MA, Hoag SW, Polli J, Raju GK, et al. Understanding pharmaceutical quality by design. AAPS J. 2014;16:771–83. · DOI · Paper page
- Singh R, Ierapetritou M, Ramachandran R. System-wide hybrid MPC-PID control of a continuous pharmaceutical tablet manufacturing process via direct compaction. Eur J Pharm Biopharm. 2013;85:1164–82. · doi:10.1016/j.ejpb.2013.02.019
- Skoglund T, Dejmek P. Fuzzy traceability: a process simulation derived extension of the traceability concept in continuous food processing. Food Bioprod Process. 2007;85:354–9. · doi:10.1205/fbp07044
- Vanarase AU, Jarvinen M, Paaso J, Muzzio FJ. Development of a methodology to estimate error in the on-line measurements of blend uniformity in a continuous powder mixing process. Powder Technol. 2013;241:263–71. · DOI
- Wahl PR, Treffer D, Mohr S, Roblegg E, Koscher G, Khinast JG. Inline monitoring and a PAT strategy for pharmaceutical hot melt extrusion. Int J Pharm. 2013;455:159–68. · DOI
- Markl D, Wahl PR, Menezes JC, Koller DM, Kavsek B, Francois K, et al. Supervisory control system for monitoring a pharmaceutical hot melt extrusion process. AAPS Pharm Sci Tech. 2013;14:1034–44. · DOI
- Schilling EG, Neubauer DV. Acceptance sampling in quality control. Boca Raton: CRC Press; 2009. · doi:10.1201/9781584889533
- Kourti T. The process analytical technology initiative and multivariate process analysis, monitoring and control. Anal Bioanal Chem. 2006;384:1043–8. · DOI
- Kourti T. Application of latent variable methods to process control and multivariate statistical process control in industry. Int J Adapt Control Signal Process. 2005;19:213–46. · DOI · Paper page
Cited by
Role of Biocatalysis in Sustainable Chemistry
Sheldon, R. A., & Woodley, J. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00203 · Cited by 1,755
Industry 4.0 for pharmaceutical manufacturing: Preparing for the smart factories of the future
Arden, N. S., Fisher, A. C., Tyner, K., Yu, L. X., Lee, S. L., & Kopcha, M. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120554 · Cited by 420
Self-citationBritton, J., Majumdar, S., & Weiss, G. A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00906b · Cited by 389
Fisher, A. C., Kamga, M.-H., Agarabi, C., Brorson, K., Lee, S. L., & Yoon, S. (2019) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.08.008 · Cited by 180
Self-citationAdvancing product quality: a summary of the second FDA/PQRI conference
Yu, L. X., Akseli, I., Allen, B., Amidon, G., Bizjak, T. G., Boam, A., Caulk, M., Doleski, D., Famulare, J., Fisher, A. C., et al. (2016) · The AAPS Journal · doi:10.1208/s12248-016-9874-5 · Cited by 33
Self-citation
Metadata
- Authors
- Lee, S. L., O’Connor, T. F., Yang, X., Cruz, C. N., Chatterjee, S., Madurawe, R. D., Moore, C. M. V., Yu, L. X., & Woodcock, J.
- Venue
- Journal of Pharmaceutical Innovation
- Published
- 2015-03-19
- Volume
- 10
- Issue
- 3
- Pages
- 191-199
- ISSN
- 1872-5120 (ISSN-L)
- 1939-8042
- OpenAlex
- W2073010988
- Cited by
- 877
- References
- 0
- FWCI
- 55.15
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.springer.com/tdm (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modernizing Pharmaceutical Manufacturing: from Batch to Continuous Production. https://app.cochat.ai/papers/10.1007/s12247-015-9215-8
- The paper
- Lee, S. L., O’Connor, T. F., Yang, X., Cruz, C. N., Chatterjee, S., Madurawe, R. D., Moore, C. M. V., Yu, L. X., & Woodcock, J. (2015). Modernizing Pharmaceutical Manufacturing: from Batch to Continuous Production. Journal of Pharmaceutical Innovation. https://doi.org/10.1007/s12247-015-9215-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.