The DOI matches its Crossref record; 29 of the 30 references it cites were found in a registry or an index, and 1 are not checked yet.
Hydrothermal liquefaction of kraft lignin in sub-critical water: the influence of the sodium and potassium fraction
Open accessAbstract
As a part of developing a hydrothermal liquefaction (HTL) process to valorise lignin, it is important to consider integration possibilities with existing infrastructures in order to obtain an overall positive economic impact. One obvious example is to integrate the HTL process with the kraft pulp mill: transport and storage costs is reduced, the temperature levels on process streams can be matched (energy integration) and the recovery/use of alkali can be made efficient. In this study, softwood kraft lignin was depolymerised using sub-critical water (623 K; 25 MPa) in a continuous, small pilot unit with a flow rate of 2 kg/h. ZrO2, K2CO3/KOH and Na2CO3/NaOH were used as catalytic system, and phenol as the capping agent. The influence of the ratio between sodium and potassium in the feed on the yield and composition of the product stream was investigated. The results showed that bio-oil, water-soluble organics (WSO) and char yields were not remarkably influenced by shifting the catalytic system from potassium to sodium. Moreover, the yields of most phenolic compounds did not change significantly when the sodium fraction was varied in the feed. The amounts of suspended solids in the bio-oil produced showed, however, a diminishing trend, (decrease from 10.8 to 3.8%) when the sodium fraction was increased in the feed, whilst the opposite trend was observed for the heavy oil, which increased from 24.6 to 37.6%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, the catalytic effect of KOH may have a greater influence on the SS yields, as observed in another study by Belkheiri et al. [113] where the change from sodium salts to potassium salts led to higher SS yields.”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Similarly, the amount of light oil in the total bio-oil yield decreased from 65.6 wt.% to 58.6 wt.%.”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The heterogeneous catalysts tested for improving the HTL of alkaline lignin were zirconia-, nickel-, ruthenium and lead-based catalysts [109,113].”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Interestingly, the highest bio-oil yield was achieved when only Na + was used, but nearly similar bio-oil yields were achieved with the two lowest molecular ratios of Na + /(Na + + K + ) (0.0 and 0.5).”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The yields of the WSO and char fractions did not significantly change when either sodium or potassium were used, although the yield of WSO slightly increased from ca. 12 wt.% up to 19.3 wt.% in the presence of both cations.”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measured
7 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A unified correlation for estimating HHV of solid, liquid and gaseous fuels
Channiwala, S. A., & Parikh, P. P. (2002) · Fuel · doi:10.1016/s0016-2361(01)00131-4 · Cited by 2,489
Lignin depolymerisation strategies: towards valuable chemicals and fuels
Xu, C., Arancon, R. A. D., Labidi, J., & Luque, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00235k · Cited by 1,031
Challenges in industrial applications of technical lignins
Vishtal, A., & Kraslawski, A. (2011) · BioResources · doi:10.15376/biores.6.3.3547-3568 · Cited by 721
Towards quantitative catalytic lignin depolymerization
Roberts, V. M., Stein, V., Reiner, T., Lemonidou, A., Li, X., & Lercher, J. A. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201002438 · Cited by 543
Conversion of Lignin with Supercritical Water−Phenol Mixtures
Saisu, M., Sato, T., Watanabe, M., Adschiri, T., & Arai, K. (2003) · Energy & Fuels · doi:10.1021/ef0202844 · Cited by 330
Converting a kraft pulp mill into an integrated forest biorefinery.
van Heiningen, A. (2006) · Cited by 323
Low-temperature catalytic hydrothermal treatment of wood biomass: analysis of liquid products
Karagöz, S., Bhaskar, T., Muto, A., Sakata, Y., Oshiki, T., & Kishimoto, T. (2005) · Chemical Engineering Journal · doi:10.1016/j.cej.2005.01.007 · Cited by 266
Recent Development in Chemical Depolymerization of Lignin: A Review
Wang, H., Tucker, M., & Ji, Y. (2013) · Journal of Applied Chemistry · doi:10.1155/2013/838645 · Cited by 260
Organosolv lignin depolymerization with different base catalysts
Toledano, A., Serrano, L., & Labidi, J. (2012) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.3799 · Cited by 230
Okuda, K., Umetsu, M., Takami, S., & Adschiri, T. (2004) · Fuel Processing Technology · doi:10.1016/j.fuproc.2003.11.027 · Cited by 187
Research works printed but not linked: 2
- Wallmo H, Littorin A, Karlsson H, Lindholm K, Stern R, Christiansen G (2016) The evolution of LignoBoost technology and the refining of lignin for end product uses—part 1. In: Pulping, engineering, environmental, recycling, sustainability conference 2016, PEERS 2016, pp 809–815
- Evans L, Littlewolf A, Lopez M, Miller JE (1999) Batch microreactor studies of base catalyzed ligin depolymerization in alcohol solvents. United States. https://www.osti.gov/servlets/purl/3334 . Accessed 30 December 2017
Cited by
Continuous Hydrothermal Liquefaction of Biomass: A Critical Review
Castello, D., Pedersen, T. H., & Rosendahl, L. A. (2018) · Energies · doi:10.3390/en11113165 · Cited by 343
Basar, I. A., Liu, H., Carrere, H., Trably, E., & Eskicioglu, C. (2021) · Green Chemistry · doi:10.1039/d0gc04092d · Cited by 253
Biomass to biofuels using hydrothermal liquefaction: A comprehensive review
Shahbeik, H., Kazemi Shariat Panahi, H., Dehhaghi, M., Guillemin, G. J., Fallahi, A., Hosseinzadeh-Bandbafha, H., Amiri, H., Rehan, M., Raikwar, D., Latine, H., et al. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113976 · Cited by 186
Nguyen, L. T., Phan, D.-P., Sarwar, A., Tran, M. H., Lee, O. K., & Lee, E. Y. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.113219 · Cited by 174
From biomass to biocrude: Innovations in hydrothermal liquefaction and upgrading
Usman, M., Cheng, S., Boonyubol, S., & Cross, J. S. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118093 · Cited by 150
Metadata
- Authors
- Belkheiri, T., Andersson, S.-I., Mattsson, C., Olausson, L., Theliander, H., & Vamling, L.
- Affiliations
- Chalmers University of Technology (SE)
- Valmet (Sweden) (SE)
- Wallenberg Wood Science Center (SE)
- Corresponding author
- Belkheiri, Tallal
- Venue
- Biomass Conversion and Biorefinery
- Published
- 2018-03-28
- Volume
- 8
- Issue
- 3
- Pages
- 585-595
- ISSN
- 2190-6815 (ISSN-L)
- 2190-6823
- OpenAlex
- W2795013788
- Cited by
- 51
- References
- 28
- Citations by year
- 2026: 4 · 2025: 2 · 2024: 7 · 2023: 8 · 2022: 10 · 2021: 9 · 2020: 7 · 2019: 2 · 2018: 2
- FWCI
- 2.00
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- Locations
- Biomass Conversion and Biorefinery (publishedVersion, cc-by)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- Energimyndigheten (40521-1)
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Subcritical and Supercritical Water Processes
- Keywords
- hydrothermal liquefaction, kraft lignin, lignin valorization, zirconia catalysts, potassium hydroxide, sodium hydroxide, bio-oil, char yield, suspended solids, heavy oil, softwood kraft pulp, process integration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrothermal liquefaction of kraft lignin in sub-critical water: the influence of the sodium and potassium fraction. https://app.cochat.ai/papers/10.1007/s13399-018-0307-9
- The paper
- Belkheiri, T., Andersson, S.-I., Mattsson, C., Olausson, L., Theliander, H., & Vamling, L. (2018). Hydrothermal liquefaction of kraft lignin in sub-critical water: the influence of the sodium and potassium fraction. Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-018-0307-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.