Hydrothermal liquefaction of kraft lignin in sub-critical water: the influence of the sodium and potassium fraction
Open accessThe DOI matches its Crossref record; 29 of the 30 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
As a part of developing a hydrothermal liquefaction (HTL) process to valorise lignin, it is important to consider integration possibilities with existing infrastructures in order to obtain an overall positive economic impact. One obvious example is to integrate the HTL process with the kraft pulp mill: transport and storage costs is reduced, the temperature levels on process streams can be matched (energy integration) and the recovery/use of alkali can be made efficient. In this study, softwood kraft lignin was depolymerised using sub-critical water (623 K; 25 MPa) in a continuous, small pilot unit with a flow rate of 2 kg/h. ZrO2, K2CO3/KOH and Na2CO3/NaOH were used as catalytic system, and phenol as the capping agent. The influence of the ratio between sodium and potassium in the feed on the yield and composition of the product stream was investigated. The results showed that bio-oil, water-soluble organics (WSO) and char yields were not remarkably influenced by shifting the catalytic system from potassium to sodium. Moreover, the yields of most phenolic compounds did not change significantly when the sodium fraction was varied in the feed. The amounts of suspended solids in the bio-oil produced showed, however, a diminishing trend, (decrease from 10.8 to 3.8%) when the sodium fraction was increased in the feed, whilst the opposite trend was observed for the heavy oil, which increased from 24.6 to 37.6%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, the catalytic effect of KOH may have a greater influence on the SS yields, as observed in another study by Belkheiri et al. [113] where the change from sodium salts to potassium salts led to higher SS yields.”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Similarly, the amount of light oil in the total bio-oil yield decreased from 65.6 wt.% to 58.6 wt.%.”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The heterogeneous catalysts tested for improving the HTL of alkaline lignin were zirconia-, nickel-, ruthenium and lead-based catalysts [109,113].”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Interestingly, the highest bio-oil yield was achieved when only Na + was used, but nearly similar bio-oil yields were achieved with the two lowest molecular ratios of Na + /(Na + + K + ) (0.0 and 0.5).”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The yields of the WSO and char fractions did not significantly change when either sodium or potassium were used, although the yield of WSO slightly increased from ca. 12 wt.% up to 19.3 wt.% in the presence of both cations.”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [113]
Experimental — accuracy not yet measured
7 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A unified correlation for estimating HHV of solid, liquid and gaseous fuels
Channiwala, S. A., & Parikh, P. P. (2002) · Fuel · doi:10.1016/s0016-2361(01)00131-4 · Cited by 2,489
Lignin depolymerisation strategies: towards valuable chemicals and fuels
Xu, C., Arancon, R. A. D., Labidi, J., & Luque, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00235k · Cited by 1,031
Challenges in industrial applications of technical lignins
Vishtal, A., & Kraslawski, A. (2011) · BioResources · doi:10.15376/biores.6.3.3547-3568 · Cited by 721 · cited 1×
“The kraft process is the most common pulping process currently employed, accounting for more than 85% of the global lignin production: it amounts to approximately 63 × 10(4) tons annually [8], making this type of process of great interest as an obvious part in an integrated forest biorefinery (IFB).”
Towards quantitative catalytic lignin depolymerization
Roberts, V. M., Stein, V., Reiner, T., Lemonidou, A., Li, X., & Lercher, J. A. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201002438 · Cited by 543 · cited 2×
“NaOH [14] 300 °C, 250 bar, boric acid Organosolv lignin Monomers, oligomers Oil 11.”
Conversion of Lignin with Supercritical Water−Phenol Mixtures
Saisu, M., Sato, T., Watanabe, M., Adschiri, T., & Arai, K. (2003) · Energy & Fuels · doi:10.1021/ef0202844 · Cited by 330
Converting a kraft pulp mill into an integrated forest biorefinery.
van Heiningen, A. (2006) · Cited by 323
Low-temperature catalytic hydrothermal treatment of wood biomass: analysis of liquid products
Karagöz, S., Bhaskar, T., Muto, A., Sakata, Y., Oshiki, T., & Kishimoto, T. (2005) · Chemical Engineering Journal · doi:10.1016/j.cej.2005.01.007 · Cited by 266 · cited 1×
“In these studies, potassium salts (in the form of K2CO3 or K2CO3/KOH) were used in order to promote lignin degradation: as explained earlier, the focus was on the potassium ion rather than the sodium because of its high catalytic activity [27].”
Recent Development in Chemical Depolymerization of Lignin: A Review
Wang, H., Tucker, M., & Ji, Y. (2013) · Journal of Applied Chemistry · doi:10.1155/2013/838645 · Cited by 260 · cited 2×
“Some studies have concluded more generally that using a base is important for promoting lignin degradation [13, 20].”
Organosolv lignin depolymerization with different base catalysts
Toledano, A., Serrano, L., & Labidi, J. (2012) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.3799 · Cited by 230 · cited 12×
“The BCD process involves the utilization of bases such as K2CO3, KOH, Na2CO3 and NaOH to promote lignin degradation.”
BackgroundInfluentialOkuda, K., Umetsu, M., Takami, S., & Adschiri, T. (2004) · Fuel Processing Technology · doi:10.1016/j.fuproc.2003.11.027 · Cited by 187 · cited 1×
“5) also showed a stable yield in this study when the Na/(Na + K) ratio was altered which, along with the fact that other studies [30, 31] consider guaiacol to be an intermediate product of lignin degradation, suggests that changing the process catalyst from potassium to sodium does not strongly affect the further conv…”
ResultA gasification-based biorefinery for the pulp and paper industry
Consonni, S., Katofsky, R. E., & Larson, E. D. (2009) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2009.07.017 · Cited by 167 · cited 1×
“…contains supplementary material, which is available to authorized users. have a great potential for diversifying their product portfolios and increasing their revenues through new biorefinery concepts [1 – 6], where by-products/residues such as black liquor [4, 7] can be valorised.”
Mattsson, C., Andersson, S.-I., Belkheiri, T., Åmand, L.-E., Olausson, L., Vamling, L., & Theliander, H. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2016.09.004 · Cited by 111
Self-citationMendes, C. V. T., Carvalho, M. G. V. S., Baptista, C. M. S. G., Rocha, J. M. S., Soares, B., & Sousa, G. D. A. (2009) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2009.06.004 · Cited by 107 · cited 1×
“have a great potential for diversifying their product portfolios and increasing their revenues through new biorefinery concepts [1–6], where by-products/residues such as black liquor [4, 7] can be valorised.”
BackgroundNguyen, T. D. H., Maschietti, M., Belkheiri, T., Åmand, L.-E., Theliander, H., Vamling, L., Olausson, L., & Andersson, S.-I. (2014) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2013.11.022 · Cited by 99 · cited 1×
“In our previous studies [16, 21 – 24], the dependences of potassium carbonate concentration, temperature, pH, recirculation ratio and phenol as capping agent and if methanol could replace phenol have been investigated as well as the storage stability of the produced bio-oil [25].”
Self-citationOlsson, M. R., Axelsson, E., & Berntsson, T. S. (2006) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2006-21-04-p476-484 · Cited by 86 · cited 1×
“Various measures and integration investments have been carried out in recent years in pulp mills [2] to ensure an energy-efficient process which makes it possible to integrate new biorefinery concept with the present pulp mills and thereby allowing hemicellulose, extractives and/or lignin to be valorised further to fo…”
Guided tour: Implementing the forest biorefinery (FBR) at existing pulp and paper mills
Chambost, V., McNutt, J., & Stuart, P. (2008) · PolyPublie (École Polytechnique de Montréal) · Cited by 85
The effect of temperature on the catalytic conversion of Kraft lignin using near-critical water
Nguyen, T. D. H., Maschietti, M., Åmand, L.-E., Vamling, L., Olausson, L., Andersson, S.-I., & Theliander, H. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.06.051 · Cited by 84 · cited 1×
“To verify a possible char formation from added phenol in the feed, a blank test has been carried out in a previous investigation [23] using similar condition as in this study but without lignin.”
MethodSelf-citationLaumer, J. D. S., Leocata, S., Tissot, E., Baroux, L., Kampf, D. M., Merle, P., Boschung, A., Seyfried, M., & Chaintreau, A. (2015) · Journal of Separation Science · doi:10.1002/jssc.201500106 · Cited by 73
Hydrothermal Liquefaction of Kraft Lignin in Subcritical Water: Influence of Phenol as Capping Agent
Belkheiri, T., Andersson, S.-I., Mattsson, C., Olausson, L., Theliander, H., & Vamling, L. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b00068 · Cited by 69
Self-citationAbdelaziz, O. Y., Li, K., Tunå, P., & Hulteberg, C. P. (2018) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-017-0294-2 · Cited by 63 · cited 2×
“NaOH [19] 170–250 °C, 12-13 MPa, lignin/NaOH= 1 Kraft lignin Monomers, solids Not stated 586 Biomass Conv.”
Low-Valent Titanium Species Stabilized with Aluminum/Boron Hydride Fragments.
Broere, D., Mercado, B., Lukens, J., et al. (2018) · e_Buah · doi:10.1002/chem · Cited by 44
Effect of pH on Kraft Lignin Depolymerisation in Subcritical Water
Belkheiri, T., Mattsson, C., Andersson, S.-I., Olausson, L., Åmand, L.-E., Theliander, H., & Vamling, L. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00462 · Cited by 39 · cited 11×
“KOH [16] 350 °C, 250 bar, phenol Kraft lignin Monomers, char, oligomers 24–40% water-soluble organics”
InfluentialSelf-citationBatch Microreactor Studies of Lignin Depolymerization by Bases. 1. Alcohol Solvents
MILLER, J., EVANS, L., LITTLEWOLF, A., & TRUDELL, D. (2002) · doi:10.2172/800959 · Cited by 36
Integration of (Hemi)-Cellulosic Biofuels Technologies with Chemical Pulp Production
Stoklosa, R. J., & Hodge, D. B. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-59498-3.00004-x · Cited by 36
Lyckeskog, H. N., Mattsson, C., Olausson, L., Andersson, S.-I., Vamling, L., & Theliander, H. (2016) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-016-0228-4 · Cited by 30 · cited 3×
“That we have a complete degradation is supported by an NMR investigation of the bio-oil in run A reported by Lyckeskog et al. [25], where it was shown that this bio-oil did not contain aliphatic inter-unit linkages typical for lignin, thereby indicating that the lignin had been effectively…”
Self-citationQuantitative Analyses of Lignin Hydrothermolysates from Subcritical Water and Water–Ethanol Systems
Jiang, W., Lyu, G., Liu, Y., Wang, C., Chen, J., & Lucia, L. A. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5011178 · Cited by 27
Kraft Lignin Depolymerization in Near-Critical Water: Effect of Changing Co-Solvent
Belkheiri, T., Vamling, L., Nguyen, T. D. H., Maschietti, M., Olausson, L., Andersson, S.-I., Åmand, L.-E., & Theliander, H. (2014) · VBN Forskningsportal (Aalborg Universitet) · Cited by 17
Self-citationSvensson, E., & Berntsson, T. S. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.04.029 · Cited by 13
US –Swedish bridge to the future: sustainable forest biorefining
Ragauskas, E. J., & Ragauskas, A. J. (2014) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1493 · Cited by 2 · cited 1×
“The recovery of lignin from kraft pulping is also being pursued actively as a resource from a biopower, biofuels and bio-based chemicals/materials perspective [9].”
Barbero (2014) · doi:10.1016/j · Cited by 1
Research works printed but not linked: 2
- Wallmo H, Littorin A, Karlsson H, Lindholm K, Stern R, Christiansen G (2016) The evolution of LignoBoost technology and the refining of lignin for end product uses—part 1. In: Pulping, engineering, environmental, recycling, sustainability conference 2016, PEERS 2016, pp 809–815
- Evans L, Littlewolf A, Lopez M, Miller JE (1999) Batch microreactor studies of base catalyzed ligin depolymerization in alcohol solvents. United States. https://www.osti.gov/servlets/purl/3334 . Accessed 30 December 2017
Cited by
Continuous Hydrothermal Liquefaction of Biomass: A Critical Review
Castello, D., Pedersen, T. H., & Rosendahl, L. A. (2018) · Energies · doi:10.3390/en11113165 · Cited by 343
Basar, I. A., Liu, H., Carrere, H., Trably, E., & Eskicioglu, C. (2021) · Green Chemistry · doi:10.1039/d0gc04092d · Cited by 253
Biomass to biofuels using hydrothermal liquefaction: A comprehensive review
Shahbeik, H., Kazemi Shariat Panahi, H., Dehhaghi, M., Guillemin, G. J., Fallahi, A., Hosseinzadeh-Bandbafha, H., Amiri, H., Rehan, M., Raikwar, D., Latine, H., et al. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113976 · Cited by 186
Nguyen, L. T., Phan, D.-P., Sarwar, A., Tran, M. H., Lee, O. K., & Lee, E. Y. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.113219 · Cited by 174
From biomass to biocrude: Innovations in hydrothermal liquefaction and upgrading
Usman, M., Cheng, S., Boonyubol, S., & Cross, J. S. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118093 · Cited by 150
Metadata
- Authors
- Belkheiri, T., Andersson, S.-I., Mattsson, C., Olausson, L., Theliander, H., & Vamling, L.
- Affiliations
- Chalmers University of Technology (SE)
- Valmet (Sweden) (SE)
- Wallenberg Wood Science Center (SE)
- Corresponding author
- Belkheiri, Tallal
- Venue
- Biomass Conversion and Biorefinery
- Published
- 2018-03-28
- Volume
- 8
- Issue
- 3
- Pages
- 585-595
- ISSN
- 2190-6815 (ISSN-L)
- 2190-6823
- OpenAlex
- W2795013788
- Cited by
- 51
- References
- 28
- Citations by year
- 2026: 4 · 2025: 2 · 2024: 7 · 2023: 8 · 2022: 10 · 2021: 9 · 2020: 7 · 2019: 2 · 2018: 2
- FWCI
- 2.00
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- Locations
- Biomass Conversion and Biorefinery (publishedVersion, cc-by)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- Energimyndigheten (40521-1)
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Subcritical and Supercritical Water Processes
- Keywords
- hydrothermal liquefaction, kraft lignin, lignin valorization, zirconia catalysts, potassium hydroxide, sodium hydroxide, bio-oil, char yield, suspended solids, heavy oil, softwood kraft pulp, process integration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.