CoChat

Fibers reinforced composite hydrogels with improved lubrication and load-bearing capacity

Open access

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Abstract

Hydrogels as one kind of soft materials with a typical three-dimensional (3D) hydrophilic network have been getting great attention in the field of biolubrication. However, traditional hydrogels commonly show poor tribology performance under high-load conditions because of their poor mechanical strength and toughness. Herein, pure chemical-crosslinking hydrogels mixed with different types of the micron-scale fibers can meet the requirements of strength and toughness for biolubrication materials, meanwhile the corresponding tribology performance improves significantly. In a typical case, three kinds of reinforcement matrix including needle-punched fibers, alginate fibers, and cottons are separately combined with Poly( n -vinyl pyrrolidone)-poly(2-hydroxyethyl methacrylate (PVP-PHEMA) hydrogels to prepare fibers reinforced composite hydrogels. The experimental results show that the mechanical properties of fibers reinforced composite hydrogels improve greatly comparable with pure PVP-PHEMA hydrogels. Among three kinds of fibers reinforced composite hydrogel, the as-prepared composite hydrogels reinforced with needle-punched fibers possess the best strength, modulus, and anti-tearing properties. Friction tests indicate that the fibers reinforced composite hydrogels demonstrate stable water-lubrication performance comparable with pure PVP-PHEMA hydrogels. Besides, the hydrogel-spunlace fiber samples show the best load-bearing and anti-wear capacities. The improved tribology performance of the composite hydrogels is highly related to mechanical property and the interaction between the fibers and hydrogel network. Finally, spunlace fibers reinforced hydrogel materials with high load-bearing and low friction properties are expected to be used as novel biomimetic lubrication materials.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s40544-020-0389-9

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY · From the PDF
Fig. 1 Schematic illustration showing the preparation process of the fiber-enhanced PVP-PHEMA composite hydrogels along with corresponding molecular structure and network structure, and existing hydrogen interaction between fiber surface and hydrogel network.
Fig. 1 Schematic illustration showing the preparation process of the fiber-enhanced PVP-PHEMA composite hydrogels along with corresponding molecular structure and network structure, and existing hydrogen interaction between fiber surface and hydrogel network.CC-BY · From the PDF
Fig. 2 (a) FESEM images of bare spunlace fibers, (b) alginate fibers, and (c) cotton fibers; network morphologies of (d) spunlace fiber composite hydrogels, (e) alginate fiber composite hydrogels, and (f) cotton fiber composite hydrogels.
Fig. 2 (a) FESEM images of bare spunlace fibers, (b) alginate fibers, and (c) cotton fibers; network morphologies of (d) spunlace fiber composite hydrogels, (e) alginate fiber composite hydrogels, and (f) cotton fiber composite hydrogels.CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Fig. 3 (a) Tensile stress-strain curves of pure PVP-PHEMA hydrogels, three kinds of bare fibers, and corresponding fiber-enhanced composite hydrogels and (b) the calculated elastic modulus; (c) compression stress-strain curves of pure PVP-PHEMA hydrogels, three kinds of bare fiber and corresponding fibers-enhanced composite hydrogels, and (d) the calculated compressive modulus.
Fig. 3 (a) Tensile stress-strain curves of pure PVP-PHEMA hydrogels, three kinds of bare fibers, and corresponding fiber-enhanced composite hydrogels and (b) the calculated elastic modulus; (c) compression stress-strain curves of pure PVP-PHEMA hydrogels, three kinds of bare fiber and corresponding fibers-enhanced composite hydrogels, and (d) the calculated compressive modulus.CC-BY · From the PDF
Fig. 4 (a) Photographs of the tearing test for fiber-enhanced composite hydrogels before (left) and (right) after undergoing a large strain deformation; (b) real-time tensile strength-distance curves in tearing tests for pure PVP-PHEMA hydrogels, three kinds of bare fibers and corresponding fibers composite hydrogels; (c) schematic of the tear test and (d) corresponding calculated fracture energy.
Fig. 4 (a) Photographs of the tearing test for fiber-enhanced composite hydrogels before (left) and (right) after undergoing a large strain deformation; (b) real-time tensile strength-distance curves in tearing tests for pure PVP-PHEMA hydrogels, three kinds of bare fibers and corresponding fibers composite hydrogels; (c) schematic of the tear test and (d) corresponding calculated fracture energy.CC-BY · From the PDF
Fig. 5 (a) Schematic diagram of interaction mechanism based on hydrogen bonds between fibers and hydrogel phases; (b) SEM image of the locally interface amplification in tearing tests of spunlace fiber-enhanced PVP-PHEMA hydrogels; (c) the model of delayed-fracture induced energy dissipation mechanism under further stretching tear process.
Fig. 5 (a) Schematic diagram of interaction mechanism based on hydrogen bonds between fibers and hydrogel phases; (b) SEM image of the locally interface amplification in tearing tests of spunlace fiber-enhanced PVP-PHEMA hydrogels; (c) the model of delayed-fracture induced energy dissipation mechanism under further stretching tear process.CC-BY · From the PDF
Fig. 6 (a) Change of friction coefficient values with normal loads upon employing PDMS ball and steel ball for pure PVP-PHEMA hydrogels; (b) the photograph of the local contact of pure PVP-PHEMA hydrogels against PDMS ball under normal load of 3 N; the real-time friction coefficient curves of pure PVP-PHEMA hydrogels against (c) PDMS ball and (d) steel ball with sliding time under normal loads of 3 and 5 N (velocity: 0.01 m/s).
Fig. 6 (a) Change of friction coefficient values with normal loads upon employing PDMS ball and steel ball for pure PVP-PHEMA hydrogels; (b) the photograph of the local contact of pure PVP-PHEMA hydrogels against PDMS ball under normal load of 3 N; the real-time friction coefficient curves of pure PVP-PHEMA hydrogels against (c) PDMS ball and (d) steel ball with sliding time under normal loads of 3 and 5 N (velocity: 0.01 m/s).CC-BY · From the PDF
Fig. 7 (a) Comparison of friction coefficient obtained in both contact counterpart on spunlace fiber composite hydrogels at different normal loads; (b) the long-time friction coefficient curve with sliding time under the load of 5 N at the sliding velocity of 0.01 m/s upon employing PDMS as friction pair; corresponding friction coefficient curves with sliding time under different loads when (c) PDMS and (d) steel ball were used as friction pairs; (e, f) the optical microscope images of the spunlace fiber composite hydrogels surface after encountering 10,000 friction tests cycles.
Fig. 7 (a) Comparison of friction coefficient obtained in both contact counterpart on spunlace fiber composite hydrogels at different normal loads; (b) the long-time friction coefficient curve with sliding time under the load of 5 N at the sliding velocity of 0.01 m/s upon employing PDMS as friction pair; corresponding friction coefficient curves with sliding time under different loads when (c) PDMS and (d) steel ball were used as friction pairs; (e, f) the optical microscope images of the spunlace fiber composite hydrogels surface after encountering 10,000 friction tests cycles.CC-BY · From the PDF
Fig. 8 Change of friction coefficient values with normal loads upon employing PDMS ball and steel ball as friction pairs for (a) alginate fiber composite hydrogels and (b) cotton composite hydrogels; typical friction coefficient curves with sliding time under different loads for alginate fiber composite hydrogels when (c) PDMS and (d) steel ball were used as friction pairs; typical friction coefficient curves with sliding time under different loads for cotton composite hydrogels when (e) PDMS and (f) steel ball were used as friction pairs.
Fig. 8 Change of friction coefficient values with normal loads upon employing PDMS ball and steel ball as friction pairs for (a) alginate fiber composite hydrogels and (b) cotton composite hydrogels; typical friction coefficient curves with sliding time under different loads for alginate fiber composite hydrogels when (c) PDMS and (d) steel ball were used as friction pairs; typical friction coefficient curves with sliding time under different loads for cotton composite hydrogels when (e) PDMS and (f) steel ball were used as friction pairs.CC-BY · From the PDF
Image 11
CC-BY · From the PDF
Image 12
CC-BY · From the PDF
Image 13
CC-BY · From the PDF
Image 14
CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 36 references

Cited by

See all 59

Metadata

Authors
Li, J., Gao, L., Xu, R., Ma, S., Ma, Z., Liu, Y., Wu, Y., Feng, L., Cai, M., & Zhou, F.
Affiliations
  • Chinese Academy of Sciences (CN)
  • Lanzhou Jiaotong University (CN)
Corresponding author
  • Ma, Shuanhong
  • Wu, Yang
Venue
Friction
Published
2020-10-21
Volume
10
Issue
1
Pages
54-67
ISSN
  • 2223-7690 (ISSN-L)
  • 2223-7704
OpenAlex
W3094356667
Cited by
57
References
36
Citations by year
2026: 11 · 2025: 9 · 2024: 14 · 2023: 13 · 2022: 7 · 2021: 3
FWCI
1.92
Type
journal article
Language
en
Open access
Licence
Locations
  • Friction (publishedVersion, cc-by)
  • Lanzhou University Institutional Repository (submittedVersion)
Funders
  • China Association for Science and Technology (2017QNRC0181)
  • National Natural Science Foundation of China (51705507, 51828302, 51805514)
  • Chinese Academy of Sciences (QYZDY-SSW-JSC013)
Topics
  • Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
  • Physical Sciences › Engineering › Mechanics of Materials › Tribology and Wear Analysis
  • Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
Keywords
fiber-reinforced hydrogels, composite hydrogels, biolubrication, tribology, alginate fibers, cotton fiber, chemical crosslinking, mechanical strength, bearing capacity, anti-wear, water lubrication

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Fibers reinforced composite hydrogels with improved lubrication and load-bearing capacity. https://app.cochat.ai/papers/10.1007/s40544-020-0389-9
The paper
Li, J., Gao, L., Xu, R., Ma, S., Ma, Z., Liu, Y., Wu, Y., Feng, L., Cai, M., & Zhou, F. (2022). Fibers reinforced composite hydrogels with improved lubrication and load-bearing capacity. Friction. https://doi.org/10.1007/s40544-020-0389-9

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.