The DOI matches its Crossref record; 257 of the 257 references it cites were found in a registry or an index.
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Open accessAbstract
Lithium–sulfur (Li–S) batteries have been considered as one of the most promising energy storage devices that have the potential to deliver energy densities that supersede that of state-of-the-art lithium ion batteries. Due to their high theoretical energy density and cost-effectiveness, Li–S batteries have received great attention and have made great progress in the last few years. However, the insurmountable gap between fundamental research and practical application is still a major stumbling block that has hindered the commercialization of Li–S batteries. This review provides insight from an engineering point of view to discuss the reasonable structural design and parameters for the application of Li–S batteries. Firstly, a systematic analysis of various parameters (sulfur loading, electrolyte/sulfur (E/S) ratio, discharge capacity, discharge voltage, Li excess percentage, sulfur content, etc.) that influence the gravimetric energy density, volumetric energy density and cost is investigated. Through comparing and analyzing the statistical information collected from recent Li–S publications to find the shortcomings of Li–S technology, we supply potential strategies aimed at addressing the major issues that are still needed to be overcome. Finally, potential future directions and prospects in the engineering of Li–S batteries are discussed. Graphical Abstract:
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479 · cited 2×
“The above mentioned electrochemical reaction of Li–S batteries belongs to the “solid–liquid” dual-phase reaction [2, 28].”
BackgroundA highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Cited by
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Bridging the academic and industrial metrics for next-generation practical batteries
Cao, Y., Li, M., Lu, J., Liu, J., & Amine, K. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0371-8 · Cited by 612
Huo, H., Chen, Y., Luo, J., Yang, X., Guo, X., & Sun, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201804004 · Cited by 579
Self-citationWu, K., Huang, J., Yi, J., Liu, X., Liu, Y., Wang, Y., Zhang, J., & Xia, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903977 · Cited by 522
Yang, X., Luo, J., & Sun, X. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 520
Self-citationWang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Self-citationRecent Advances in Hollow Porous Carbon Materials for Lithium–Sulfur Batteries
Fu, A., Wang, C., Pei, F., Cui, J., Fang, X., & Zheng, N. (2019) · Small · doi:10.1002/smll.201804786 · Cited by 417
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Self-citationRational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Yang, X., Adair, K. R., Gao, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02714f · Cited by 392
Self-citationRedox Comediation with Organopolysulfides in Working Lithium-Sulfur Batteries
Zhao, M., Li, B.-Q., Chen, X., Xie, J., Yuan, H., & Huang, J.-Q. (2020) · Chem · doi:10.1016/j.chempr.2020.09.015 · Cited by 280
Building Better Batteries in the Solid State: A Review
Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K. (2019) · Materials · doi:10.3390/ma12233892 · Cited by 277
Battery Technologies for Grid-Level Large-Scale Electrical Energy Storage
Fan, X., Liu, B., Liu, J., Ding, J., Han, X., Deng, Y., Lv, X., Xie, Y., Chen, B., Hu, W., et al. (2020) · Transactions of Tianjin University · doi:10.1007/s12209-019-00231-w · Cited by 272
Versatile zero‐ to three‐dimensional carbon for electrochemical energy storage
Zhao, Y., Zhang, Y., Wang, Y., Cao, D., Sun, X., & Zhu, H. (2021) · Carbon Energy · doi:10.1002/cey2.137 · Cited by 90
Self-citation
Metadata
- Authors
- Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X.
- Venue
- Electrochemical Energy Reviews
- Published
- 2018-06-23
- Volume
- 1
- Issue
- 3
- Pages
- 239-293
- ISSN
- 2520-8136 (ISSN-L)
- 2520-8489
- OpenAlex
- W2809472441
- Cited by
- 411
- References
- 257
- FWCI
- 16.84
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.