The DOI matches its Crossref record; 257 of the 257 references it cites were found in a registry or an index.
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Open accessAbstract
Lithium–sulfur (Li–S) batteries have been considered as one of the most promising energy storage devices that have the potential to deliver energy densities that supersede that of state-of-the-art lithium ion batteries. Due to their high theoretical energy density and cost-effectiveness, Li–S batteries have received great attention and have made great progress in the last few years. However, the insurmountable gap between fundamental research and practical application is still a major stumbling block that has hindered the commercialization of Li–S batteries. This review provides insight from an engineering point of view to discuss the reasonable structural design and parameters for the application of Li–S batteries. Firstly, a systematic analysis of various parameters (sulfur loading, electrolyte/sulfur (E/S) ratio, discharge capacity, discharge voltage, Li excess percentage, sulfur content, etc.) that influence the gravimetric energy density, volumetric energy density and cost is investigated. Through comparing and analyzing the statistical information collected from recent Li–S publications to find the shortcomings of Li–S technology, we supply potential strategies aimed at addressing the major issues that are still needed to be overcome. Finally, potential future directions and prospects in the engineering of Li–S batteries are discussed. Graphical Abstract:
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
A review on lithium-ion battery ageing mechanisms and estimations for automotive applications
Barré, A., Deguilhem, B., Grolleau, S., Gérard, M., Suard, F., & Riu, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.040 · Cited by 1,758
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Progress in flexible lithium batteries and future prospects
Zhou, G., Li, F., & Cheng, H.-M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43182g · Cited by 1,498
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Dutta, S., Bhaumik, A., & Wu, K. C.-W. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01075b · Cited by 1,413
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Inorganic solid Li ion conductors: An overview
Knauth, P. (2009) · Solid State Ionics · doi:10.1016/j.ssi.2009.03.022 · Cited by 1,170
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
Zhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Song, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Nanostructured conductive polymers for advanced energy storage
Shi, Y., Peng, L., Ding, Y., Zhao, Y., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00362h · Cited by 932
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Palacín, M. R., & de Guibert, A. (2016) · Science · doi:10.1126/science.1253292 · Cited by 871
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Liang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Li, Z., Zhang, J., & Lou, X. W. (. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506972 · Cited by 841
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Song, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411109 · Cited by 776
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries
Li, Z., Zhang, J., Guan, B., Wang, D., Liu, L.-M., & Lou, X. W. (2016) · Nature Communications · doi:10.1038/ncomms13065 · Cited by 677
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
Li, Z., Wu, H. B., & (David) Lou, X. W. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02364a · Cited by 654
Challenges for rechargeable batteries
Goodenough, J. B., & Kim, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.074 · Cited by 636
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Atomic Layer Deposition of Nanostructured Materials for Energy and Environmental Applications
Marichy, C., Bechelany, M., & Pinna, N. (2012) · Advanced Materials · doi:10.1002/adma.201104129 · Cited by 591
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Zhang, J., Hu, H., Li, Z., & Lou, X. W. (. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511632 · Cited by 560
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Hu, G., Xu, C., Sun, Z., Wang, S., Cheng, H., Li, F., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201504765 · Cited by 532
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Pie-like electrode design for high-energy density lithium–sulfur batteries
Li, Z., Zhang, J. T., Chen, Y. M., Li, J., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms9850 · Cited by 524
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
He, J., Luo, L., Chen, Y., & Manthiram, A. (2017) · Advanced Materials · doi:10.1002/adma.201702707 · Cited by 521
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Self-citationStructural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
High-capacity, low-tortuosity, and channel-guided lithium metal anode
Zhang, Y., Luo, W., Wang, C., Li, Y., Chen, C., Song, J., Dai, J., Hitz, E. M., Xu, S., Yang, C., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1618871114 · Cited by 472
Tatsumisago, M., Nagao, M., & Hayashi, A. (2013) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2013.03.005 · Cited by 471
Surface Chemistry in Cobalt Phosphide-Stabilized Lithium–Sulfur Batteries
Zhong, Y., Yin, L., He, P., Liu, W., Wu, Z., & Wang, H. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b11434 · Cited by 458
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
Marmorstein, D., Yu, T. H., Striebel, K. A., McLarnon, F. R., Hou, J., & Cairns, E. J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00432-8 · Cited by 451
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Hassoun, J., & Scrosati, B. (2010) · Advanced Materials · doi:10.1002/adma.201002584 · Cited by 415
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
A Graphene-like Oxygenated Carbon Nitride Material for Improved Cycle-Life Lithium/Sulfur Batteries
Liu, J., Li, W., Duan, L., Li, X., Ji, L., Geng, Z., Huang, K., Lu, L., Zhou, L., Liu, Z., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01919 · Cited by 401
Self-citationYao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Embedding Sulfur in MOF‐Derived Microporous Carbon Polyhedrons for Lithium–Sulfur Batteries
Wu, H. B., Wei, S., Zhang, L., Xu, R., Hng, H. H., & Lou, X. W. (. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201301689 · Cited by 386
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Zhou, W., Xiao, X., Cai, M., & Yang, L. (2014) · Nano Letters · doi:10.1021/nl502238b · Cited by 382
Lithium Superionic Sulfide Cathode for All-Solid Lithium–Sulfur Batteries
Lin, Z., Liu, Z., Dudney, N. J., & Liang, C. (2013) · ACS Nano · doi:10.1021/nn400391h · Cited by 378
Dendrite-Free Lithium Deposition with Self-Aligned Nanorod Structure
Zhang, Y., Qian, J., Xu, W., Russell, S. M., Chen, X., Nasybulin, E., Bhattacharya, P., Engelhard, M. H., Mei, D., Cao, R., et al. (2014) · Nano Letters · doi:10.1021/nl5039117 · Cited by 365
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Strubel, P., Thieme, S., Biemelt, T., Helmer, A., Oschatz, M., Brückner, J., Althues, H., & Kaskel, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402768 · Cited by 352
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Zhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Yu, M., Ma, J., Song, H., Wang, A., Tian, F., Wang, Y., Qiu, H., & Wang, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03902a · Cited by 345
A Graphene Foam Electrode with High Sulfur Loading for Flexible and High-Energy Li–S Batteries
Zhou, G. (2017) · Springer Theses · doi:10.1007/978-981-10-3406-0_6 · Cited by 344
Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive
Qian, J., Xu, W., Bhattacharya, P., Engelhard, M., Henderson, W. A., Zhang, Y., & Zhang, J.-G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.009 · Cited by 339
Zhang, H., Zhang, H., Li, X., Mai, Z., & Zhang, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01117k · Cited by 334
Self-citationYim, T., Park, M.-S., Yu, J.-S., Kim, K. J., Im, K. Y., Kim, J.-H., Jeong, G., Jo, Y. N., Woo, S.-G., Kang, K. S., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.039 · Cited by 328
Lithium–sulfur batteries—the solution is in the electrolyte, but is the electrolyte a solution?
Barghamadi, M., Best, A. S., Bhatt, A. I., Hollenkamp, A. F., Musameh, M., Rees, R. J., & Rüther, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02192d · Cited by 324
Pei, F., Lin, L., Ou, D., Zheng, Z., Mo, S., Fang, X., & Zheng, N. (2017) · Nature Communications · doi:10.1038/s41467-017-00575-8 · Cited by 324
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Li, Z., Yuan, L., Yi, Z., Liu, Y., Xin, Y., Zhang, Z., & Huang, Y. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/2/42 · Cited by 322
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
Lu, S., Cheng, Y., Wu, X., & Liu, J. (2013) · Nano Letters · doi:10.1021/nl400543y · Cited by 319
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311
Monodispersed Sulfur Nanoparticles for Lithium–Sulfur Batteries with Theoretical Performance
Chen, H., Wang, C., Dong, W., Lu, W., Du, Z., & Chen, L. (2015) · Nano Letters · doi:10.1021/nl504963e · Cited by 304
Lin, D., Zhao, J., Sun, J., Yao, H., Liu, Y., Yan, K., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1619489114 · Cited by 299
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
Wang, D.-W., Zhou, G., Li, F., Wu, K.-H., Lu, G. Q. (., Cheng, H.-M., & Gentle, I. R. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40808b · Cited by 296
A Facile Layer‐by‐Layer Approach for High‐Areal‐Capacity Sulfur Cathodes
Qie, L., & Manthiram, A. (2015) · Advanced Materials · doi:10.1002/adma.201405689 · Cited by 290
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201300680 · Cited by 287
Chung, S., Chang, C., & Manthiram, A. (2016) · ACS Nano · doi:10.1021/acsnano.6b06369 · Cited by 282
Toward More Reliable Lithium–Sulfur Batteries: An All-Graphene Cathode Structure
Fang, R., Zhao, S., Pei, S., Qian, X., Hou, P.-X., Cheng, H.-M., Liu, C., & Li, F. (2016) · ACS Nano · doi:10.1021/acsnano.6b04019 · Cited by 280
Li, N., Yin, Y., Li, J., Zhang, C., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600400 · Cited by 273
Zhang, H., Zhao, W., Zou, M., Wang, Y., Chen, Y., Xu, L., Wu, H., & Cao, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800013 · Cited by 273
Self-citationGu, X., Tong, C.-J., Lai, C., Qiu, J., Huang, X., Yang, W., Wen, B., Liu, L.-M., Hou, Y., & Zhang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04255k · Cited by 270
Synthesis and Electrochemical Performance of Sulfur/Highly Porous Carbon Composites
Lai, C., Gao, X. P., Zhang, B., Yan, T. Y., & Zhou, Z. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809473e · Cited by 265
Sun, Q., He, B., Zhang, X.-Q., & Lu, A.-H. (2015) · ACS Nano · doi:10.1021/acsnano.5b03488 · Cited by 265
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Angewandte Chemie · doi:10.1002/ange.201300680 · Cited by 261
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Chen, L., & Fan, L. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.015 · Cited by 259
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Core-shell structured sulfur-polypyrrole composite cathodes for lithium-sulfur batteries
Fu, Y., & Manthiram, A. (2012) · RSC Advances · doi:10.1039/c2ra20393f · Cited by 253
Zhang, L., Ling, M., Feng, J., Mai, L., Liu, G., & Guo, J. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.09.001 · Cited by 251
Li, Z., & Yin, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507660y · Cited by 248
Advanced engineering of nanostructured carbons for lithium–sulfur batteries
Wang, J.-G., Xie, K., & Wei, B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.05.006 · Cited by 247
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
Zhang, K., Zhao, Q., Tao, Z., & Chen, J. (2013) · Nano Research · doi:10.1007/s12274-012-0279-1 · Cited by 241
Xu, T., Song, J., Gordin, M. L., Sohn, H., Yu, Z., Chen, S., & Wang, D. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4035784 · Cited by 238
Ma, L., Yuan, H., Zhang, W., Zhu, G., Wang, Y., Hu, Y., Zhao, P., Chen, R., Chen, T., Liu, J., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b04084 · Cited by 234
Graphene-based nano-materials for lithium–sulfur battery and sodium-ion battery
Wu, S., Ge, R., Lu, M., Xu, R., & Zhang, Z. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.032 · Cited by 233
Chen, H., Dong, W., Ge, J., Wang, C., Wu, X., Lu, W., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01910 · Cited by 233
Zhang, X., Chen, X., Xu, R., Cheng, X., Peng, H., Zhang, R., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707093 · Cited by 231
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
Electrochemical (De)Lithiation of 1D Sulfur Chains in Li–S Batteries: A Model System Study
Yang, C.-P., Yin, Y.-X., Guo, Y.-G., & Wan, L.-J. (2015) · Journal of the American Chemical Society · doi:10.1021/ja513009v · Cited by 226
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
Peng, H.-J., Huang, J.-Q., Liu, X.-Y., Cheng, X.-B., Xu, W.-T., Zhao, C.-Z., Wei, F., & Zhang, Q. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12358 · Cited by 224
Protected lithium anode with porous Al2O3layer for lithium–sulfur battery
Jing, H.-K., Kong, L.-L., Liu, S., Li, G.-R., & Gao, X.-P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01490e · Cited by 220
Copper‐Stabilized Sulfur‐Microporous Carbon Cathodes for Li–S Batteries
Zheng, S., Yi, F., Li, Z., Zhu, Y., Xu, Y., Luo, C., Yang, J., & Wang, C. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304156 · Cited by 217
Yamada, T., Ito, S., Omoda, R., Watanabe, T., Aihara, Y., Agostini, M., Ulissi, U., Hassoun, J., & Scrosati, B. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0441504jes · Cited by 217
V2O5 Polysulfide Anion Barrier for Long-Lived Li–S Batteries
Li, W., Hicks-Garner, J., Wang, J., Liu, J., Gross, A. F., Sherman, E., Graetz, J., Vajo, J. J., & Liu, P. (2014) · Chemistry of Materials · doi:10.1021/cm500575q · Cited by 217
Liang, G., Wu, J., Qin, X., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07487 · Cited by 216
Yu, X., & Manthiram, A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00460 · Cited by 209
Wang, C., Wan, W., Chen, J.-T., Zhou, H.-H., Zhang, X.-X., Yuan, L.-X., & Huang, Y.-H. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00915c · Cited by 206
Zheng, W., Liu, Y. W., Hu, X. G., & Zhang, C. F. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.06.021 · Cited by 205
Lu, S., Chen, Y., Wu, X., Wang, Z., & Li, Y. (2014) · Scientific Reports · doi:10.1038/srep04629 · Cited by 203
Judez, X., Zhang, H., Li, C., González-Marcos, J. A., Zhou, Z., Armand, M., & Rodriguez-Martinez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00593 · Cited by 203
Self-citationKim, J.-S., Kim, D. W., Jung, H. T., & Choi, J. W. (2015) · Chemistry of Materials · doi:10.1021/cm503447u · Cited by 199
Single step transformation of sulphur to Li2S2/Li2S in Li-S batteries
Helen, M., Reddy, M. A., Diemant, T., Golla-Schindler, U., Behm, R. J., Kaiser, U., & Fichtner, M. (2015) · Scientific Reports · doi:10.1038/srep12146 · Cited by 198
Miao, L., Wang, W., Yuan, K., et al. (2014) · Chemical Communications · doi:10.1039/c4cc03410d · Cited by 194
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Chung, S., & Manthiram, A. (2018) · Advanced Materials · doi:10.1002/adma.201705951 · Cited by 192
Shao, H., Wang, W., Zhang, H., Wang, A., Chen, X., & Huang, Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.067 · Cited by 192
Self-citationLiu, J., Banis, M. N., Sun, Q., Lushington, A., Li, R., Sham, T., & Sun, X. (2014) · Advanced Materials · doi:10.1002/adma.201401805 · Cited by 190
Self-citationAmylopectin Wrapped Graphene Oxide/Sulfur for Improved Cyclability of Lithium–Sulfur Battery
Zhou, W., Chen, H., Yu, Y., Wang, D., Cui, Z., DiSalvo, F. J., & Abruña, H. D. (2013) · ACS Nano · doi:10.1021/nn403237b · Cited by 190
Papandrea, B., Xu, X., Xu, Y., Chen, C.-Y., Lin, Z., Wang, G., Luo, Y., Liu, M., Huang, Y., Mai, L., et al. (2016) · Nano Research · doi:10.1007/s12274-016-1005-1 · Cited by 190
Safe and Durable High-Temperature Lithium–Sulfur Batteries via Molecular Layer Deposited Coating
Li, X., Lushington, A., Sun, Q., Xiao, W., Liu, J., Wang, B., Ye, Y., Nie, K., Hu, Y., Xiao, Q., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00577 · Cited by 185
Self-citationLi, Y., Fu, K. “., Chen, C., Luo, W., Gao, T., Xu, S., Dai, J., Pastel, G., Wang, Y., Liu, B., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b01172 · Cited by 184
Lithium-Sulfur Battery Technology Readiness and Applications—A Review
Fotouhi, A., Auger, D., O’Neill, L., Cleaver, T., & Walus, S. (2017) · Energies · doi:10.3390/en10121937 · Cited by 180
Yu, M., Ma, J., Xie, M., Song, H., Tian, F., Xu, S., Zhou, Y., Li, B., Wu, D., Qiu, H., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602347 · Cited by 180
Liu, Y., Li, G., Fu, J., Chen, Z., & Peng, X. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700686 · Cited by 180
Yu, M., Wang, Z., Wang, Y., Dong, Y., & Qiu, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700018 · Cited by 180
Liu, S., Li, G.-R., & Gao, X.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12231 · Cited by 177
High‐Quality Graphene Microflower Design for High‐Performance Li–S and Al‐Ion Batteries
Chen, H., Chen, C., Liu, Y., Zhao, X., Ananth, N., Zheng, B., Peng, L., Huang, T., Gao, W., & Gao, C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700051 · Cited by 173
Effective strategies for stabilizing sulfur for advanced lithium–sulfur batteries
Ogoke, O., Wu, G., Wang, X., Casimir, A., Ma, L., Wu, T., & Lu, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07864h · Cited by 172
Ai, W., Zhou, W., Du, Z., Chen, Y., Sun, Z., Wu, C., Zou, C., Li, C., Huang, W., & Yu, T. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.008 · Cited by 170
Zhao, Y., Li, M., Yuan, Z., Li, X., Zhang, H., & Vankelecom, I. F. J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503390 · Cited by 167
Self-citationXu, R.-C., Xia, X.-H., Li, S.-H., Zhang, S.-Z., Wang, X.-L., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01147d · Cited by 167
Chang, Z., Dou, H., Ding, B., Wang, J., Wang, Y., Hao, X., & MacFarlane, D. R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07202j · Cited by 165
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Hollow cobalt sulfide polyhedra-enabled long-life, high areal-capacity lithium-sulfur batteries
Xu, H., & Manthiram, A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.007 · Cited by 162
Balach, J., Singh, H. K., Gomoll, S., Jaumann, T., Klose, M., Oswald, S., Richter, M., Eckert, J., & Giebeler, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03642 · Cited by 161
Zhang, C., Lin, Y., & Liu, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01037c · Cited by 159
Enhanced Performance of a Lithium–Sulfur Battery Using a Carbonate‐Based Electrolyte
Xu, Z., Wang, J., Yang, J., Miao, X., Chen, R., Qian, J., & Miao, R. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605931 · Cited by 159
Liu, J., & Sun, X. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/2/024001 · Cited by 158
Self-citation
Cited by
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Bridging the academic and industrial metrics for next-generation practical batteries
Cao, Y., Li, M., Lu, J., Liu, J., & Amine, K. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0371-8 · Cited by 612
Huo, H., Chen, Y., Luo, J., Yang, X., Guo, X., & Sun, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201804004 · Cited by 579
Self-citation
Metadata
- Authors
- Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X.
- Venue
- Electrochemical Energy Reviews
- Published
- 2018-06-23
- Volume
- 1
- Issue
- 3
- Pages
- 239-293
- ISSN
- 2520-8136 (ISSN-L)
- 2520-8489
- OpenAlex
- W2809472441
- Cited by
- 411
- References
- 257
- FWCI
- 16.84
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.