The DOI matches its Crossref record; 257 of the 257 references it cites were found in a registry or an index.
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Open accessAbstract
Lithium–sulfur (Li–S) batteries have been considered as one of the most promising energy storage devices that have the potential to deliver energy densities that supersede that of state-of-the-art lithium ion batteries. Due to their high theoretical energy density and cost-effectiveness, Li–S batteries have received great attention and have made great progress in the last few years. However, the insurmountable gap between fundamental research and practical application is still a major stumbling block that has hindered the commercialization of Li–S batteries. This review provides insight from an engineering point of view to discuss the reasonable structural design and parameters for the application of Li–S batteries. Firstly, a systematic analysis of various parameters (sulfur loading, electrolyte/sulfur (E/S) ratio, discharge capacity, discharge voltage, Li excess percentage, sulfur content, etc.) that influence the gravimetric energy density, volumetric energy density and cost is investigated. Through comparing and analyzing the statistical information collected from recent Li–S publications to find the shortcomings of Li–S technology, we supply potential strategies aimed at addressing the major issues that are still needed to be overcome. Finally, potential future directions and prospects in the engineering of Li–S batteries are discussed. Graphical Abstract:
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–257 of 257
Ma, Z., Li, Z., Hu, K., Liu, D., Huo, J., & Wang, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.139 · Cited by 155
Graphitized porous carbon materials with high sulfur loading for lithium-sulfur batteries
Peng, X., Lü, Y., Zhou, L., Sheng, T., Shen, S., Liao, H., Huang, L., Li, J., & Sun, S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.060 · Cited by 150
Zhang, J., Gu, P., Xu, J. L., Xue, H., & Pang, H. (2016) · Nanoscale · doi:10.1039/c6nr07207k · Cited by 144
Electrochemical properties of ether-based electrolytes for lithium/sulfur rechargeable batteries
Barchasz, C., Leprêtre, J., Patoux, S., et al. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.11.001 · Cited by 143
A high sulfur content composite with core–shell structure as cathode material for Li–S batteries
Miao, L., Wang, W., Wang, A., et al. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12079a · Cited by 143
Ye, J., He, F., Nie, J., Cao, Y., Yang, H., & Ai, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06976e · Cited by 143
Frey, M., Zenn, R. K., Warneke, S., Müller, K., Hintennach, A., Dinnebier, R. E., & Buchmeiser, M. R. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00009 · Cited by 143
Ling, M., Zhang, L., Zheng, T., Feng, J., Guo, J., Mai, L., & Liu, G. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.020 · Cited by 141
Enhanced cycle performance of a Li–S battery based on a protected lithium anode
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04172k · Cited by 139
A core–shell electrode for dynamically and statically stable Li–S battery chemistry
Chung, S., Chang, C., & Manthiram, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01280a · Cited by 139
Biomass-derived nanostructured porous carbons for lithium-sulfur batteries
Imtiaz, S., Zhang, J., Zafar, Z. A., Ji, S., Huang, T., Anderson, J. A., Zhang, Z., & Huang, Y. (2016) · Science China Materials · doi:10.1007/s40843-016-5047-8 · Cited by 136
Mi, Y., Liu, W., Li, X., Zhuang, J., Zhou, H., & Wang, H. (2017) · Nano Research · doi:10.1007/s12274-017-1581-8 · Cited by 136
Self-citationWu, F., Li, J., Tian, Y., Su, Y., Wang, J., Yang, W. J., Li, N., Chen, S., & Bao, L. (2015) · Scientific Reports · doi:10.1038/srep13340 · Cited by 132
Niu, S., Zhou, G., Lv, W. Z., Shi, H., Luo, C., He, Y., Li, B., Yang, Q., & Kang, F. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.062 · Cited by 124
Multifunctional Sandwich‐Structured Electrolyte for High‐Performance Lithium–Sulfur Batteries
Qu, H., Zhang, J., Du, A., Chen, B., Chai, J., Xue, N., Wang, L., Qiao, L., Wang, C., Zang, X. M., et al. (2018) · Advanced Science · doi:10.1002/advs.201700503 · Cited by 122
Chemical routes toward long-lasting lithium/sulfur cells
Liu, M., Ye, F., Li, W., Li, H., & Zhang, Y. (2016) · Nano Research · doi:10.1007/s12274-016-1027-8 · Cited by 120
Li, X., Sun, Q., Liu, J., Xiao, B., Li, R., & Sun, X. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.049 · Cited by 117
Self-citationWhy PEO as a binder or polymer coating increases capacity in the Li–S system
Lacey, M. J., Jeschull, F., Edström, K., et al. (2013) · Chemical Communications · doi:10.1039/c3cc44772c · Cited by 112
Fan, C., Yuan, H., Li, H., Wang, H., Li, W., Sun, H., Wu, X., & Zhang, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04578 · Cited by 112
Zhong, Y., Wang, S., Sha, Y., Liu, M., Cai, R., Li, L., & Shao, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03187k · Cited by 109
Xu, H., Qie, L., & Manthiram, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.028 · Cited by 100
Sun, Q., Fang, X., Weng, W., Deng, J., Chen, P., Ren, J., Guan, G., Wang, M., & Peng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504514 · Cited by 98
Song, J., Yu, Z., Xu, T., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00742e · Cited by 97
Jeddi, K., Sarikhani, K., Qazvini, N. T., & Chen, P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.147 · Cited by 96
Lee, H., Song, J., Kim, Y., Park, J.-K., & Kim, H. (2016) · Scientific Reports · doi:10.1038/srep30830 · Cited by 93
Li, Y., Ye, D., Liu, W., Shi, B., Guo, R., Zhao, H., Pei, H., Xu, J., & Xie, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04270 · Cited by 91
Li, F., Qin, F., Zhang, K., Fang, J., Lai, Y., & Li, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.038 · Cited by 90
All-solid-state MoS 2 /Li 6 PS 5 Br/In–Li batteries as a novel type of Li/S battery
Chen, M., Yin, X., Reddy, M. V., & Adams, S. N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02372f · Cited by 88
Chen, Y., Zhang, H., Xu, W., Yang, X., Yu, Y., Li, X., & Zhang, H. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704987 · Cited by 88
Self-citationWang, T., Kretschmer, K., Choi, S., Pang, H., Xue, H., & Wang, G. (2017) · Small Methods · doi:10.1002/smtd.201700089 · Cited by 87
Schneider, A., Weidmann, C., Suchomski, C., Sommer, H., Janek, J., & Brezesinski, T. (2015) · Chemistry of Materials · doi:10.1021/cm504460p · Cited by 83
Yan, J., Liu, X., He, Q., Li, W., Zhou, Y., Yao, M., & Li, B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02533 · Cited by 83
Zegeye, T. A., Tsai, M., Cheng, J., Lin, M., Chen, H.-M., Rick, J. F., Su, W.-N. J., Kuo, C. J., & Hwang, B. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.063 · Cited by 81
Hong, X., Jin, J. H., Wu, T., Yang, L., Zhang, S., Chen, C., & Wen, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03552g · Cited by 81
Luo, L., Chung, S., & Manthiram, A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07709a · Cited by 79
Yang, X., Dong, B., Zhang, H., Ge, R., Gao, Y., & Zhang, H. (2015) · RSC Advances · doi:10.1039/c5ra16235a · Cited by 72
Self-citationPolycation Binders: An Effective Approach toward Lithium Polysulfide Sequestration in Li–S Batteries
Su, H., Fu, C., Zhao, Y., Long, D., Ling, L., Wong, B. M., Lu, J. B., & Guo, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00779 · Cited by 72
Wang, M., Zhang, H., Zhou, W., Yang, X., Li, X., & Zhang, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08999a · Cited by 63
Self-citationWu, H., Huang, Y., Sun, X., Zhang, W., Wang, K., & Meng, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.164 · Cited by 61
Self-citationLi, X., Pu, X., Han, S., Liu, M., Du, C., Jiang, C., Huang, X. M., Liu, T., & Hu, W. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.10.015 · Cited by 60
Self-citationFang, R., Zhao, S., Pei, S., Cheng, Y., Hou, P., Liu, M., Cheng, H., Liu, C., & Li, F. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.050 · Cited by 58
Li, G., Wang, C., Cai, W., Lin, Z., Li, Z. P., & Zhang, S. (2016) · NPG Asia Materials · doi:10.1038/am.2016.138 · Cited by 58
Zhou, X., Liao, Q., Bai, T., & Yang, J. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1029-2 · Cited by 55
Ye, Y., Wang, L., Guan, L., Wu, F., Qian, J., Zhao, T., Zhang, X., Xing, Y., Shi, J., Li, L., et al. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.07.004 · Cited by 52
Yang, X., Zhang, H., Chen, Y., Yu, Y., Li, X., & Zhang, H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.07.028 · Cited by 50
Self-citationHwang, J., Kim, H. M., & Sun, Y. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0131801jes · Cited by 49
Han, S., Pu, X., Li, X., Liu, M., Li, M., Feng, N., Dou, S., & Hu, W. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.05.005 · Cited by 48
Self-citationEffect of sulfur loading on energy density of lithium sulfur batteries
Kang, S.-H., Zhao, X., Manuel, J., et al. (2014) · physica status solidi (a) · doi:10.1002/pssa.201330569 · Cited by 43
Carter, R., Davis, B., Oakes, L., Maschmann, M. R., & Pint, C. L. (2017) · Nanoscale · doi:10.1039/c7nr02368e · Cited by 41
Hollow sulfur@graphene oxide core–shell composite for high-performance Li–S batteries
Zhang, J., Yang, N., Yang, X., Li, S., Yao, J., & Cai, Y. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.08.050 · Cited by 37
Self-citationNara, H., Yokoshima, T., Mikuriya, H., Tsuda, S., Momma, T., & Ōsaka, T. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0381701jes · Cited by 37
Zhang, M., Yu, C., Yang, J., Zhao, C., Ling, Z., & Qiu, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01512g · Cited by 35
Du, W., Zhang, J., Yin, Y., Guo, Y., & Wan, L. (2016) · Chemistry - An Asian Journal · doi:10.1002/asia.201600449 · Cited by 32
Foldable and High Sulfur Loading 3D Carbon Electrode for High-performance Li-S Battery Application
He, N. S. M., Zhong, L., Xiao, M., et al. (2016) · Scientific Reports · doi:10.1038/srep33871 · Cited by 32
Mi, Y., Liu, W., Wang, Q., Jiang, J., Brudvig, G. W., Zhou, H., & Wang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00035a · Cited by 27
Waluś, S., Barchasz, C., Bouchet, R., Martin, J., Leprêtre, J., & Alloin, F. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.05.204 · Cited by 25
High specific energy Lithium Sulfur cell for space application
Samaniego, B., Carla, E., O’Neill, L., & Nestoridi, M. (2017) · E3S Web of Conferences · doi:10.1051/e3sconf/20171608006 · Cited by 20
Cited by
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Bridging the academic and industrial metrics for next-generation practical batteries
Cao, Y., Li, M., Lu, J., Liu, J., & Amine, K. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0371-8 · Cited by 612
Huo, H., Chen, Y., Luo, J., Yang, X., Guo, X., & Sun, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201804004 · Cited by 579
Self-citation
Metadata
- Authors
- Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X.
- Venue
- Electrochemical Energy Reviews
- Published
- 2018-06-23
- Volume
- 1
- Issue
- 3
- Pages
- 239-293
- ISSN
- 2520-8136 (ISSN-L)
- 2520-8489
- OpenAlex
- W2809472441
- Cited by
- 411
- References
- 257
- FWCI
- 16.84
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.