The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
A review on carbon fiber-reinforced hierarchical composites: mechanical performance, manufacturing process, structural applications and allied challenges
Open accessAbstract
The utilization of carbonaceous reinforcement-based polymer matrix composites in structural applications has become a hot topic in composite research. Although conventional carbon fiber-reinforced polymer composites (CFRPs) have revolutionized the composite industry by offering unparalleled features, they are often plagued with a weak interface and lack of toughness. However, the promising aspects of carbon fiber-based fiber hybrid composites and hierarchical composites can compensate for these setbacks. This review provides a meticulous landscape and recent progress of polymer matrix-based different carbonaceous (carbon fiber, carbon nanotube, graphene, and nanodiamond) fillers reinforced composites’ mechanical properties. First, the mechanical performance of neat CFRP was exhaustively analyzed, attributing parameters were listed down, and CFRPs’ mechanical performance barriers were clearly outlined. Here, short carbon fiber-reinforced thermoplastic composite was distinguished as a prospective material. Second, the strategic advantages of fiber hybrid composites over conventional CFRP were elucidated. Third, the mechanical performance of hierarchical composites based on carbon nanotube (1D), graphene (2D) and nanodiamond (0D) was expounded and evaluated against neat CFRP. Fourth, the review comprehensively discussed different fabrication methods, categorized them according to performance and suggested potential future directions. From here, the review sorted out three-dimensional printing (3DP) as the most futuristic fabrication method and thoroughly delivered its pros and cons in the context of the aforementioned carbonaceous materials. To conclude, the structural applications, current challenges and future prospects pertinent to these carbonaceous fillers reinforced composite materials were elaborated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Mechanical Properties of Monolayer Graphene Oxide
Suk, J. W., Piner, R. D., An, J., & Ruoff, R. S. (2010) · ACS Nano · doi:10.1021/nn101781v · Cited by 1,194
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Fibre hybridisation in polymer composites: A review
Swolfs, Y., Gorbatikh, L., & Verpoest, I. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.08.027 · Cited by 944
Multiscale Carbon Nanotube−Carbon Fiber Reinforcement for Advanced Epoxy Composites
Bekyarova, E., Thostenson, E. T., Yu, A., Kim, H., Gao, J., Tang, J., Hahn, H. T., Chou, T.-W., Itkis, M. E., & Haddon, R. C. (2007) · Langmuir · doi:10.1021/la062743p · Cited by 885
Current status of carbon fibre and carbon fibre composites recycling
Zhang, J., Chevali, V. S., Wang, H., & Wang, C.-H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108053 · Cited by 866
Carbon nanotube-based hierarchical composites: a review
Qian, H., Greenhalgh, E. S., Shaffer, M. S. P., & Bismarck, A. (2010) · Journal of Materials Chemistry · doi:10.1039/c000041h · Cited by 794
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Karataş, M. A., & Gökkaya, H. (2018) · Defence Technology · doi:10.1016/j.dt.2018.02.001 · Cited by 755
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707
Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020) · Composite Structures · doi:10.1016/j.compstruct.2019.111476 · Cited by 678
Interfacial Microstructure and Properties of Carbon Fiber Composites Modified with Graphene Oxide
Zhang, X., Fan, X., Yan, C., Li, H., Zhu, Y., Li, X., & Yu, L. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201757v · Cited by 673
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
Heidari-Rarani, M., Rafiee-Afarani, M., & Zahedi, A. M. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107147 · Cited by 615
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Melenka, G. W., Cheung, B. K. O., Schofield, J. S., Dawson, M. R., & Carey, J. P. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.018 · Cited by 597
Carbon nanotubes: synthesis, properties and engineering applications
Gupta, N., Gupta, S. M., & Sharma, S. K. (2019) · Carbon Letters · doi:10.1007/s42823-019-00068-2 · Cited by 559
Life cycle energy analysis of fiber-reinforced composites
Song, Y. S., Youn, J. R., & Gutowski, T. G. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.05.020 · Cited by 548
Kumar, A., Sharma, K., & Dixit, A. R. (2019) · Journal of Materials Science · doi:10.1007/s10853-018-03244-3 · Cited by 546
A self-healing carbon fibre reinforced polymer for aerospace applications
Williams, G., Trask, R., & Bond, I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.013 · Cited by 518
Rajak, D. K., Wagh, P. H., & Linul, E. (2021) · Polymers · doi:10.3390/polym13213721 · Cited by 518
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Chacón, J. M., Caminero, M. Á., López, P. J. N., Plaza, E. G., García-Moreno, I., & Reverte, J. M. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107688 · Cited by 512
Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites
Pathak, A. K., Borah, M., Gupta, A., Yokozeki, T., & Dhakate, S. R. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.09.007 · Cited by 501
Review of the mechanical properties of carbon nanofiber/polymer composites
Al-Saleh, M. H., & Sundararaj, U. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.08.005 · Cited by 496
Nanofiber‐reinforced polymers prepared by fused deposition modeling
Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12496 · Cited by 484
Caminero, M. A., Chacón, J. M., García-Moreno, I., & Rodríguez, G. P. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.04.054 · Cited by 479
Joost, W. J. (2012) · JOM · doi:10.1007/s11837-012-0424-z · Cited by 478
Das, T. K., Ghosh, P., & Das, N. C. (2019) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0072-z · Cited by 469
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., & Ziegmann, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.139 · Cited by 432
Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes
Pakdel, E., Kashi, S., Varley, R., & Wang, X. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105340 · Cited by 375
Kumar, A., Sharma, K., & Dixit, A. R. (2021) · Carbon Letters · doi:10.1007/s42823-020-00161-x · Cited by 355
Qin, W., Vautard, F., Drzal, L. T., & Yu, J. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.10.014 · Cited by 344
Kumar, A., Sharma, K., & Dixit, A. R. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04196-y · Cited by 338
Optimisation of wind turbine blades
Jureczko, M., Pawlak, M., & Mężyk, A. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.06.055 · Cited by 322
Liao, G., Li, Z., Cheng, Y., Xu, D., Zhu, D., Jiang, S., Guo, J., Chen, X., Xu, G., & Zhu, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.027 · Cited by 315
Nanodiamond-Polymer Composite Fibers and Coatings
Behler, K. D., Stravato, A., Mochalin, V., Korneva, G., Yushin, G., & Gogotsi, Y. (2009) · ACS Nano · doi:10.1021/nn800445z · Cited by 311
Covalent Incorporation of Aminated Nanodiamond into an Epoxy Polymer Network
Mochalin, V. N., Neitzel, I., Etzold, B. J. M., Peterson, A., Palmese, G., & Gogotsi, Y. (2011) · ACS Nano · doi:10.1021/nn2024539 · Cited by 298
A critical review of nanodiamond based nanocomposites: Synthesis, properties and applications
Zhang, Y., Rhee, K. Y., Hui, D., & Park, S.-J. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.01.028 · Cited by 283
Yan, C., Hao, L., Xu, L., & Shi, Y. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.08.013 · Cited by 236
Hand layup: understanding the manual process
Elkington, M. P., Bloom, D., Ward, C., Chatzimichali, A. P., & Potter, K. D. (2015) · Advanced Manufacturing Polymer & Composites Science · doi:10.1080/20550340.2015.1114801 · Cited by 221
Chabaud, G., Castro, M., Denoual, C., & Le Duigou, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.01.005 · Cited by 215
Li, F., Liu, Y., Qu, C.-B., Xiao, H.-M., Hua, Y., Sui, G.-X., & Fu, S.-Y. (2015) · Polymer · doi:10.1016/j.polymer.2014.12.067 · Cited by 210
Elastic properties of 3D printed fibre-reinforced structures
Al Abadi, H., Thai, H.-T., Paton-Cole, V., & Patel, V. I. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.03.051 · Cited by 208
Araya-Calvo, M., López-Gómez, I., Chamberlain-Simon, N., León-Salazar, J. L., Guillén-Girón, T., Corrales-Cordero, J. S., & Sánchez-Brenes, O. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.007 · Cited by 201
Mechanical properties of vapor-grown carbon fiber composites with thermoplastic matrices
Tibbetts, G. G., & McHugh, J. J. (1999) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1999.0383 · Cited by 190
Vapor grown carbon fiber composites with epoxy and poly(phenylene sulfide) matrices
Patton, R. D., Pittman, C. U., Wang, L., & Hill, J. R. (1999) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(99)00018-4 · Cited by 189
Zhang, Y., Rhee, K. Y., & Park, S. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.01.051 · Cited by 180
3D Printing of Textiles: Potential Roadmap to Printing with Fibers
Chatterjee, K., & Ghosh, T. K. (2020) · Advanced Materials · doi:10.1002/adma.201902086 · Cited by 180
Mechanical properties of nanodiamond-reinforced polymer-matrix composites
Maitra, U., Prasad, K. E., Ramamurty, U., & Rao, C. N. R. (2009) · Solid State Communications · doi:10.1016/j.ssc.2009.06.017 · Cited by 175
Karami, P., Salkhi Khasraghi, S., Hashemi, M., Rabiei, S., & Shojaei, A. (2019) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2019.04.006 · Cited by 165
Yavaş, D., Zhang, Z., Liu, Q., & Wu, D. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108460 · Cited by 161
Respiratory toxicity of carbon nanotubes: How worried should we be?
Muller, J., Huaux, F., & Lison, D. (2005) · Carbon · doi:10.1016/j.carbon.2005.10.019 · Cited by 154
Gangineni, P. K., Yandrapu, S., Ghosh, S. K., Anand, A., Prusty, R. K., & Ray, B. C. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.04.017 · Cited by 153
Processing of hybrid polymer composites—a review
Asim, M., Jawaid, M., Saba, N., Ramengmawii, Nasir, M., & Sultan, M. T. H. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100789-1.00001-0 · Cited by 137
A review of gas sensors based on carbon nanomaterial
Raya, I., Kzar, H. H., Mahmoud, Z. H., Ahmed, A. A. A., Ibatova, A. Z., & Kianfar, E. (2021) · Carbon letters · doi:10.1007/s42823-021-00276-9 · Cited by 137
Kamineni, J. N., & Burela, R. G. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.12.149 · Cited by 136
A recent trend: application of graphene in catalysis
Yan, Y., Shin, W. I., Chen, H., Lee, S.-M., Manickam, S., Hanson, S., Zhao, H., Lester, E. H., Wu, T., & Pang, C. H. (2020) · Carbon letters · doi:10.1007/s42823-020-00200-7 · Cited by 133
de Toro, E. V., Coello, J., Martínez, A., Miguel, V., & Ayllón, J. (2020) · Materials · doi:10.3390/ma13030672 · Cited by 130
Wu, J., Hui, C., Wu, Q., et al. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.037 · Cited by 119
Meng, F., Cui, Y., Pickering, S., & McKechnie, J. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108362 · Cited by 116
Global carbon fibre market remains on upward trend
Holmes, M. J. (2014) · Reinforced Plastics · doi:10.1016/s0034-3617(14)70251-6 · Cited by 114
Özdemir, S., Kılınç, E., Çelik, K. S., Okumuş, V., & Soylak, M. (2016) · Food Chemistry · doi:10.1016/j.foodchem.2016.07.055 · Cited by 99
Lee, W., Lee, J. U., Cha, H.-J., et al. (2013) · RSC Advances · doi:10.1039/c3ra44155e · Cited by 91
Carbon substrates: a review on fabrication, properties and applications
Ramesh, M., Rajeshkumar, L., & Bhoopathi, R. (2021) · Carbon letters · doi:10.1007/s42823-021-00264-z · Cited by 91
Jabeen, S., Kausar, A., Muhammad, B., Gul, S., & Farooq, M. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1021489 · Cited by 90
Carbon-based electronic textiles: materials, fabrication processes and applications
Khair, N., Islam, R., & Shahariar, H. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03464-1 · Cited by 87
Wang, K., Li, S., Rao, Y., Wu, Y., Peng, Y. L., Yao, S., Zhang, H., & Ahzi, S. (2019) · Polymers · doi:10.3390/polym11111878 · Cited by 83
Valorosi, F., Meo, E. D., Blanco-Varela, T., Martorana, B., Veca, A. D., Pugno, N. M., Kinloch, I. A., Anagnostopoulos, G., Galiotis, C., Bertocchi, F., et al. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107848 · Cited by 76
Haleem, Y. A., Liu, D., Chen, W., Wang, C., Hong, C., He, Z., Liu, J., Song, P., Yu, S., & Song, L. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.04.012 · Cited by 74
3D printing technology for textiles and fashion
Dip, T. M., Emu, A. S., Nafiz, M. N. H., Kundu, P., Rakhi, H. R., Sayam, A., Akhtarujjman, M., Shoaib, M., Ahmed, M. S., Ushno, S. T., et al. (2020) · Textile Progress · doi:10.1080/00405167.2021.1978223 · Cited by 61
Self-citationFlexible piezoresistive strain sensor based on CNTs–polymer composites: a brief review
Yi, Y., Wang, B., Liu, X., & Li, C. (2022) · Carbon letters · doi:10.1007/s42823-022-00320-2 · Cited by 61
Kozior, T., Błachowicz, T., & Ehrmann, A. (2020) · Journal of Engineered Fibers and Fabrics · doi:10.1177/1558925020910875 · Cited by 54
Research progress on key problems of nanomaterials-modified geopolymer concrete
Xu, Z., Huang, Z., Liu, C., Deng, H., Deng, X., Hui, D., Zhang, X., & Bai, Z. (2021) · Nanotechnology Reviews · doi:10.1515/ntrev-2021-0056 · Cited by 50
Akasheh, F., & Aglan, H. A. (2018) · Journal of Elastomers & Plastics · doi:10.1177/0095244318817867 · Cited by 44
Nie, H., Xu, Z., Tang, B., Dang, C., Yang, Y.-R., Zeng, X., Lin, B., & Shen, X. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05286-y · Cited by 40
Alimohammady, M., Jahangiri, M., Kiani, F., & Tahermansouri, H. (2019) · Carbon letters · doi:10.1007/s42823-019-00001-7 · Cited by 37
Elagib, T. H. H., Hassan, E. A. M., Liu, B., Han, K., & Yu, M. (2019) · Carbon letters · doi:10.1007/s42823-019-00092-2 · Cited by 33
Serag, E., El‐Maghraby, A., & Nemr, A. E. (2021) · Carbon letters · doi:10.1007/s42823-021-00299-2 · Cited by 32
Analysis on mechanical and thermal properties of glass-carbon/epoxy based hybrid composites
Ambigai, R., & Prabhu, S. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/402/1/012136 · Cited by 24
Cited by
Wahab, A., Muhammad, M., Ullah, S., Abdi, G., Shah, G. M., Zaman, W., & Ayaz, A. (2024) · Science of The Total Environment · doi:10.1016/j.scitotenv.2024.171862 · Cited by 287
Metadata
- Authors
- Sayam, A., Rahman, A. N. M. M., Rahman, M. S., Smriti, S. A., Ahmed, F., Rabbi, M. F., Hossain, M., & Faruque, M. O.
- Venue
- Carbon Letters
- Published
- 2022-06-07
- Volume
- 32
- Issue
- 5
- Pages
- 1173-1205
- ISSN
- 1976-4251 (ISSN-L)
- 2233-4998
- OpenAlex
- W4281752349
- Cited by
- 308
- References
- 85
- FWCI
- 20.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.