The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
Open accessAbstract
Abstract Powder spattering is a major cause of defect formation and quality uncertainty in the laser powder bed fusion (LPBF) additive manufacturing (AM) process. It is very difficult to investigate this with either conventional characterization tools or modeling and simulation. The detailed dynamics of powder spattering in the LPBF process is still not fully understood. Here, we report insights into the transient dynamics of powder spattering in the LPBF process that was observed with in-situ high-speed high-energy x-ray imaging. Powder motion dynamics, as a function of time, environment pressure, and location, is presented. The moving speed, acceleration, and driving force of powder motion that are induced by metal vapor jet/plume and argon gas flow are quantified. A schematic map showing the dynamics and mechanisms of powder motion during the LPBF process as functions of time and pressure is constructed. Potential ways to mitigate powder spattering during the LPBF process are discussed and proposed, based on the revealed powder motion dynamics and mechanisms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Qiu, C., Panwisawas, C., Ward, R., Basoalto, H., Brooks, J. W., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.004 · Cited by 1,041
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Zhao, C., Fezzaa, K., Cunningham, R. W., Wen, H., De Carlo, F., Chen, L., Rollett, A. D., & Sun, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-03761-2 · Cited by 758
Self-citationFluid and particle dynamics in laser powder bed fusion
Bidare, P., Bitharas, I., Ward, R. M., Attallah, M. M., & Moore, A. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.051 · Cited by 555
Ly, S., Rubenchik, A. M., Khairallah, S. A., Guss, G. M., & Matthews, M. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-04237-z · Cited by 521
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
In-process sensing in selective laser melting (SLM) additive manufacturing
Spears, T. G., & Gold, S. A. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0045-4 · Cited by 495
Modeling of additive manufacturing processes for metals: Challenges and opportunities
Francois, M. M., Sun, A., King, W. E., Henson, N. J., Tourret, D., Bronkhorst, C. A., Carlson, N. N., Newman, C. K., Haut, T., Bakosi, J., et al. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.001 · Cited by 462
Scipioni Bertoli, U., Guss, G., Wu, S., Matthews, M. J., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.044 · Cited by 412
Multiscale Modeling of Powder Bed–Based Additive Manufacturing
Markl, M., & Körner, C. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032158 · Cited by 401
Fundamentals of Selective Laser Melting of alloyed steel powders
Rombouts, M., Kruth, J. P., Froyen, L., & Mercelis, P. (2006) · CIRP Annals · doi:10.1016/s0007-8506(07)60395-3 · Cited by 400
Gunenthiram, V., Peyre, P., Schneider, M., Dal, M., Coste, F., Koutiri, I., & Fabbro, R. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.08.012 · Cited by 345
Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2882-8 · Cited by 342
Grasso, M., Demir, A. G., Previtali, B., & Colosimo, B. M. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.07.001 · Cited by 231
Monitoring and Adaptive Control of Laser Processes
Purtonen, T., Kalliosaari, A., & Salminen, A. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.038 · Cited by 215
On the use of spatter signature for in-situ monitoring of Laser Powder Bed Fusion
Repossini, G., Laguzza, V., Grasso, M., & Colosimo, B. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.004 · Cited by 206
Spatter formation in selective laser melting process using multi-laser technology
Andani, M. T., Dehghani, R., Karamooz-Ravari, M. R., Mirzaeifar, R., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.040 · Cited by 203
Thermographic measurements of the commercial laser powder bed fusion process at NIST
Lane, B., Moylan, S., Whitenton, E. P., & Ma, L. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0161 · Cited by 175
Layerwise Monitoring of the Selective Laser Melting Process by Thermography
Krauss, H., Zeugner, T., & Zaeh, M. F. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.097 · Cited by 136
An open-architecture metal powder bed fusion system for in-situ process measurements
Bidare, P., Maier, R. R. J., Beck, R. J., Shephard, J. D., & Moore, A. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.007 · Cited by 91
Process Monitoring in Laser Sintering Using Thermal Imaging
Wegner, A., & Witt, G. (2011) · doi:10.26153/tsw/15303 · Cited by 73
Cited by
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Cunningham, R., Zhao, C., Parab, N., Kantzos, C., Pauza, J., Fezzaa, K., Sun, T., & Rollett, A. D. (2019) · Science · doi:10.1126/science.aav4687 · Cited by 1,066
Self-citationDynamics of pore formation during laser powder bed fusion additive manufacturing
Martin, A. A., Calta, N. P., Khairallah, S. A., Wang, J., Depond, P. J., Fong, A. Y., Thampy, V., Guss, G. M., Kiss, A. M., Stone, K. H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10009-2 · Cited by 711
An overview of tailoring strain delocalization for strength-ductility synergy
Wu, H., & Fan, G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100675 · Cited by 536
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Metadata
- Authors
- Guo, Q., Zhao, C., Escano, L. I., Young, Z., Xiong, L., Fezzaa, K., Everhart, W., Brown, B., Sun, T., & Chen, L.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 151
- Pages
- 169-180
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2794002618
- Cited by
- 409
- References
- 29
- FWCI
- 24.46
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.