Embedding magnesium metallic particles in polycaprolactone nanofiber mesh improves applicability for biomedical applications
The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Magnesium (Mg) metal is of great interest in biomedical applications, especially in tissue engineering. Mg exhibits excellent in vivo biocompatibility, biodegradability and, during degradation, releases Mg ions (Mg2+) with the potential to improve tissue repair. We used electrospinning technology to incorporate Mg particles into nanofibers. Various ratios of Mg metal microparticles (<44 µm diameter) were incorporated into nanofiber polycaprolactone (PCL) meshes. Physicochemical properties of the meshes were analyzed by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), mechanical tensile testing, X-ray diffractometry and UV-VIS spectrophotometry. Biological properties of meshes were evaluated in vitro and in vivo. Under mammalian cell culture conditions, Mg-containing meshes released hydrogen gas and relative amounts of free Mg2+ that reflected the Mg/PCL ratios. All meshes were non-cytotoxic for 3T3 fibroblasts and PC-12 pheochromocytoma cells. In vivo implantation under the skin of mice for 3, 8 and 28 days showed that Mg-containing meshes were well vascularized, with improved measures of inflammation and healing compared to meshes without Mg. Evidence included an earlier appearance and infiltration of tissue repairing macrophages and, after 28 days, evidence of more mature tissue remodeling. Thus, these new composite nanofiber meshes have promising material properties that mitigated inflammatory tissue responses to PCL alone and improved tissue healing, thus providing a suitable matrix for use in clinically relevant tissue engineering applications. STATEMENT OF SIGNIFICANCE: The biodegradable metal, magnesium, safely biodegrades in the body, releasing beneficial byproducts. To improve tissue delivery, magnesium metal particles were incorporated into electrospun nanofiber meshes composed of a biodegradable, biocompatible polymer, polycaprolactone (PCL). Magnesium addition, at several concentrations, did not alter PCL chemistry, but did alter physical properties. Under cell culture conditions, meshes released magnesium ions and hydrogen gas and were not cytotoxic for two cell types. After implantation in mice, the mesh with magnesium resulted in earlier appearance of M2-like, reparative macrophages and improved tissue healing versus mesh alone. This is in agreement with other studies showing beneficial effects of magnesium metal and provides a new type of scaffold material that will be useful in clinically relevant tissue engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
O'Brien, J., Wilson, I., Orton, T., & Pognan, F. (2000) · European Journal of Biochemistry · doi:10.1046/j.1432-1327.2000.01606.x · Cited by 3,446
Magnesium in man: implications for health and disease
de Baaij, J. H. F., Hoenderop, J. G. J., & Bindels, R. J. M. (2015) · Physiological Reviews · doi:10.1152/physrev.00012.2014 · Cited by 1,726
Zhang, Y., Xu, J., Ruan, Y. C., Yu, M. K., O'Laughlin, M., Wise, H., Chen, D., Tian, L., Shi, D., Wang, J., et al. (2016) · Nature Medicine · doi:10.1038/nm.4162 · Cited by 1,051
Biomaterial based modulation of macrophage polarization: a review and suggested design principles
Sridharan, R., Cameron, A. R., Kelly, D. J., Kearney, C. J., & O’Brien, F. J. (2015) · Materials Today · doi:10.1016/j.mattod.2015.01.019 · Cited by 826
Arginase-1–Expressing Macrophages Suppress Th2 Cytokine–Driven Inflammation and Fibrosis
Pesce, J. T., Ramalingam, T. R., Mentink-Kane, M. M., Wilson, M. S., El Kasmi, K. C., Smith, A. M., Thompson, R. W., Cheever, A. W., Murray, P. J., & Wynn, T. A. (2009) · PLoS Pathogens · doi:10.1371/journal.ppat.1000371 · Cited by 816
Jeon, K.-J., Moon, H. R., Ruminski, A. M., Jiang, B., Kisielowski, C., Bardhan, R., & Urban, J. J. (2011) · Nature Materials · doi:10.1038/nmat2978 · Cited by 731 · cited 2×
“4 , corresponding to the (100), (002), (101), (102), and (110) crystallographic planes of Mg, respectively [56].”
BackgroundBlakney, A. K., Swartzlander, M. D., & Bryant, S. J. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34104 · Cited by 470
Garg, K., Pullen, N. A., Oskeritzian, C. A., Ryan, J. J., & Bowlin, G. L. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.02.065 · Cited by 457
Structural and catalytic chemistry of magnesium-dependent enzymes
Cowan, J. A. (2002) · Biometals · doi:10.1023/a:1016022730880 · Cited by 428 · cited 1×
“Mg is a crucial co-factor for over 300 enzymes [22].”
BackgroundCharacterization of topographical effects on macrophage behavior in a foreign body response model
Chen, S., Jones, J. A., Xu, Y., Low, H.-Y., Anderson, J. M., & Leong, K. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.074 · Cited by 389
Saino, E., Focarete, M. L., Gualandi, C., Emanuele, E., Cornaglia, A. I., Imbriani, M., & Visai, L. (2011) · Biomacromolecules · doi:10.1021/bm200248h · Cited by 285 · cited 1×
“Data in the literature also suggest that increasing the size of fibers (while remaining near the nanoscale) and increasing the degree of alignment might also improve biocompatibility and reduce the FBR to the meshes [87,88].”
BackgroundGhosal, K., Agatemor, C., Špitálsky, Z., Thomas, S., & Kny, E. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.117 · Cited by 278 · cited 1×
“In addition to improving strength, metals can add important functions, such as making the scaffolds act as sensors, be antibacterial or catalytic, or absorb gases or toxins [15,16,19].”
BackgroundLi, W., Yu, J., Liu, Y., Huang, X., Abumaria, N., Zhu, Y., Huang, X., Xiong, W., Ren, C., Liu, X.-G., et al. (2014) · Molecular Brain · doi:10.1186/s13041-014-0065-y · Cited by 146
Rondanelli, M., Opizzi, A., Monteferrario, F., Antoniello, N., Manni, R., & Klersy, C. (2011) · Journal of the American Geriatrics Society · doi:10.1111/j.1532-5415.2010.03232.x · Cited by 126
Sanders, J. E., Bale, S. D., & Neumann, T. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10285 · Cited by 82
The Role of Macrophages in the Foreign Body Response to Implanted Biomaterials
Yu, T., Tutwiler, V. J., & Spiller, K. (2015) · Biomaterials in Regenerative Medicine and the Immune System · doi:10.1007/978-3-319-18045-8_2 · Cited by 39
Cited by
Wang, S., Gu, R., Wang, F., Zhao, X., Yang, F., Xu, Y., Yan, F., Zhu, Y., Xia, D., & Liu, Y. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100202 · Cited by 115
Rashtchian, M., Hivechi, A., Bahrami, S. H., Milan, P. B., & Simorgh, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115873 · Cited by 112
ten Brink, T., Damanik, F., Rotmans, J. I., & Moroni, L. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202301939 · Cited by 71
Ben Amara, H., Martinez, D. C., Shah, F. A., Loo, A. J., Emanuelsson, L., Norlindh, B., Willumeit-Römer, R., Plocinski, T., Swieszkowski, W., Palmquist, A., et al. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.02.014 · Cited by 42
“encapsulation was also reported in mice 28 d following implantation with Mg particles-embedded polymer nano-fiber meshes subsequent to an initial inflammatory response [82].”
Metadata
- Authors
- Adhikari, U., An, X., Rijal, N., Hopkins, T., Khanal, S., Chavez, T., Tatu, R., Sankar, J., Little, K. J., Hom, D. B., Bhattarai, N., & Pixley, S. K.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 98
- Pages
- 215-234
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2943128521
- Cited by
- 91
- References
- 17
- FWCI
- 2.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.