The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Main defects observed in aluminum alloy parts produced by SLM: From causes to consequences
Abstract
In recent years, the SLM process has been studied for the production of aluminum alloy parts, as these alloys demonstrate significant potential for the future, notably due to their low density which allows a considerable reduction in mass. The aim of this bibliographical study is to identify and classify the parameters and phenomena which influence the appearance of defects in aluminum alloy parts produced using the SLM process and hence the final properties of these parts. To do this, a cause tree diagram was created. For each defect or consequence identified (porosities, defects linked with hot cracking phenomena, anisotropy in the material and surface quality), we revealed the potential sources of the appearance of this defect, going back to the initial causes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Rappaz, M., Drezet, J. M., & Gremaud, M. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0334-z · Cited by 1,070
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
Simonelli, M., Tse, Y. Y., & Tuck, C. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.07.086 · Cited by 1,010
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Li, W., Li, S., Liu, J., Zhang, A., Zhou, Y., Wei, Q., Yan, C., & Shi, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.03.088 · Cited by 850
Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.059 · Cited by 849
Li, Y., & Gu, D. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.006 · Cited by 824
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Wang, F., Williams, S., Colegrove, P., & Antonysamy, A. A. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1444-6 · Cited by 737
Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., & Everitt, N. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.04.092 · Cited by 675
High Power Selective Laser Melting (HP SLM) of Aluminum Parts
Buchbinder, D., Schleifenbaum, H., Heidrich, S., Meiners, W., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.035 · Cited by 666
Li, X. P., Wang, X. J., Saunders, M., Suvorova, A., Zhang, L. C., Liu, Y. J., Fang, M. H., Huang, Z. H., & Sercombe, T. B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.017 · Cited by 654
Changing the alloy composition of Al7075 for better processability by selective laser melting
Montero-Sistiaga, M. L., Mertens, R., Vrancken, B., Wang, X., Hooreweder, B. V., Kruth, J., & Humbeeck, J. V. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.08.003 · Cited by 590
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.013 · Cited by 585
Zhang, H., Zhu, H., Qi, T., Hu, Z., & Zeng, X. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.101 · Cited by 565
Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J., Aversa, A., Ambrosio, E., Lombardi, M., Fino, P., & Manfredi, D. (2017) · Materials · doi:10.3390/ma10010076 · Cited by 502
In-process sensing in selective laser melting (SLM) additive manufacturing
Spears, T. G., & Gold, S. A. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0045-4 · Cited by 495
Zhang, H., Zhu, H., Nie, X., Yin, J., Hu, Z., & Zeng, X. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.02.036 · Cited by 477
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
Calignano, F., Manfredi, D., Ambrosio, E. P., Iuliano, L., & Fino, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4688-9 · Cited by 469
Olakanmi, E. O. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.009 · Cited by 418
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
Prashanth, K. G., Scudino, S., Maity, T., Das, J., & Eckert, J. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1299808 · Cited by 418
Kimura, T., & Nakamoto, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.065 · Cited by 404
Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K., & Schrage, J. (2014) · Journal of Laser Applications · doi:10.2351/1.4828755 · Cited by 390
Schmidtke, K., Palm, F., Hawkins, A., & Emmelmann, C. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.047 · Cited by 389
Defining the tensile properties of Al-12Si parts produced by selective laser melting
Prashanth, K. G., Scudino, S., & Eckert, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.044 · Cited by 382
Simchi, A., & Pohl, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00341-1 · Cited by 377
Tian, Y., Tomus, D., Rometsch, P., & Wu, X. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.10.010 · Cited by 363
Manfredi, D., Calignano, F., Krishnan, M., Canali, R., Ambrosio, E., & Atzeni, E. (2013) · Materials · doi:10.3390/ma6030856 · Cited by 307
Part and material properties in selective laser melting of metals
Kruth, J., Badrossamay, M., Yasa, E., Deckers, J. P., Thijs, L., & Humbeeck, J. V. (2010) · Lirias · Cited by 303
Buchbinder, D., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Laser Applications · doi:10.2351/1.4906389 · Cited by 184
New Developments of Laser Processing Aluminium Alloys via Additive Manufacturing Technique
Bartkowiak, K., Ullrich, S., Frick, T., & Schmidt, M. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.050 · Cited by 183
Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting
Ma, P., Prashanth, K., Scudino, S., Jia, Y., Wang, H., Zou, C., Wei, Z., & Eckert, J. (2014) · Metals · doi:10.3390/met4010028 · Cited by 181
Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting
Prashanth, K. G., Shahabi, H. S., Attar, H., et al. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.01.001 · Cited by 174
Vora, P., Mumtaz, K., Todd, I., & Hopkinson, N. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.06.003 · Cited by 173
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.003 · Cited by 171
Process Optimization and Microstructural Analysis for Selective Laser Melting of AlSi10Mg
Kempen, K., Thijs, L., Yasa, E., Badrossamay, M., Verheecke, W., & Kruth, J. (2011) · Lirias · doi:10.26153/tsw/15310 · Cited by 137
Selective laser melting of Al-12Si alloy: Enhanced densification via powder drying
Li, X., O'Donnell, K. M., & Sercombe, T. B. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.01.003 · Cited by 135
Additive Manufacturing of Al-12Si Alloy Via Pulsed Selective Laser Melting
Chou, R., Milligan, J., Paliwal, M., & Brochu, M. (2015) · JOM · doi:10.1007/s11837-014-1272-9 · Cited by 129
Aversa, A., Lorusso, M., Cattano, G., Manfredi, D., Calignano, F., Ambrosio, E. P., Biamino, S., Fino, P., Lombardi, M., & Pavese, M. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.285 · Cited by 84
Manfredi, D., Ambrosio, E. P., Calignano, F., Krishnan, M., Canali, R., Biamino, S., Pavese, M., Atzeni, E., Iuliano, L., Fino, P., et al. (2013) · Frattura ed Integrità Strutturale · Cited by 82
Dai, D., Gu, D., Poprawe, R., & Xia, M. (2017) · 中国科学通报:英文版 · doi:10.1016/j.scib.2017.05.007 · Cited by 58
Sun, S., Zheng, L., Liu, Y., Liu, J., & Zhang, H. (2015) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2015.110 · Cited by 38
THE EFFECT OF POROSITY ON SOME OF THE PHYSICAL PROPERTIES OF POWDER-METALLURGY COMPONENTS
Morgan, V. T. (1963) · Powder Metallurgy · doi:10.1179/pom.1963.6.12.006 · Cited by 14
Cited by
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Maamoun, A. H., Xue, Y. F., Elbestawi, M. A., & Veldhuis, S. C. (2018) · Materials · doi:10.3390/ma11122343 · Cited by 311
Zhao, L., Song, L., Santos Macías, J. G., Zhu, Y., Huang, M., Simar, A., & Li, Z. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102914 · Cited by 292
Zerbst, U., Bruno, G., Buffière, J.-Y., Wegener, T., Niendorf, T., Wu, T., Zhang, X., Kashaev, N., Meneghetti, G., Hrabe, N., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100786 · Cited by 263
Mahmood, M. A., Chioibasu, D., Ur Rehman, A., Mihai, S., & Popescu, A. C. (2022) · Metals · doi:10.3390/met12010077 · Cited by 119
Metadata
- Authors
- Galy, C., Le Guen, E., Lacoste, E., & Arvieu, C.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 22
- Pages
- 165-175
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2799279888
- Cited by
- 318
- References
- 48
- FWCI
- 15.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.