The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
A multi-scale convolutional neural network for autonomous anomaly detection and classification in a laser powder bed fusion additive manufacturing process
Open accessAbstract
Abstract In-situ detection of processing defects is a critical challenge for Laser Powder Bed Fusion Additive Manufacturing. Many of these defects are related to interactions between the recoater blade, which spreads the powder, and the powder bed. This work leverages Deep Learning, specifically a Convolutional Neural Network (CNN), for autonomous detection and classification of many of these spreading anomalies. Importantly, the input layer of the CNN is modified to enable the algorithm to learn both the appearance of the powder bed anomalies as well as key contextual information at multiple size scales. These modifications to the CNN architecture are shown to improve the flexibility and overall classification accuracy of the algorithm while mitigating many human biases. A case study is used to demonstrate the utility of the presented methodology and the overall performance is shown to be superior to that of methodologies previously reported by the authors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
An introduction to ROC analysis
Fawcett, T. (2006) · Pattern Recognition Letters · doi:10.1016/j.patrec.2005.10.010 · Cited by 21,879
Kuhn, M., & Johnson, K. (2013) · doi:10.1007/978-1-4614-6849-3 · Cited by 6,788
How transferable are features in deep neural networks?
Yosinski, J., Clune, J., Bengio, Y., & Lipson, H. (2014) · arXiv · doi:10.48550/arxiv.1411.1792 · Cited by 6,061
Visual categorization with bags of keypoints
Csurka, G. (2004) · Cited by 4,379
SUN database: Large-scale scene recognition from abbey to zoo
Xiao, J., Hays, J., Ehinger, K. A., Oliva, A., & Torralba, A. (2010) · 2010 IEEE Computer Society Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2010.5539970 · Cited by 3,283
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Digital selection and analogue amplification coexist in a cortex-inspired silicon circuit
Hahnloser, R. H. R., Sarpeshkar, R., Mahowald, M. A., Douglas, R. J., & Seung, H. S. (2000) · Nature · doi:10.1038/35016072 · Cited by 1,293
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Parry, L., Ashcroft, I. A., & Wildman, R. D. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.014 · Cited by 739
Evaluation of convolutional neural networks for visual recognition
Nebauer, C. (1998) · IEEE Transactions on Neural Networks · doi:10.1109/72.701181 · Cited by 597
Multi-scale Convolutional Neural Networks for Lung Nodule Classification
Shen, W., Zhou, M., Yang, F., Yang, C., & Tian, J. (2015) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-19992-4_46 · Cited by 592
In-process sensing in selective laser melting (SLM) additive manufacturing
Spears, T. G., & Gold, S. A. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0045-4 · Cited by 495
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.009 · Cited by 489
Self-citationGünther, J., Pilarski, P. M., Helfrich, G., Shen, H., & Diepold, K. (2014) · Procedia Technology · doi:10.1016/j.protcy.2014.09.007 · Cited by 303
Dunbar, A. J., Denlinger, E. R., Heigel, J. C., Michaleris, P., Guerrier, P. K., Martukanitz, R. P., & Simpson, T. W. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.04.007 · Cited by 200
In situ surface topography of laser powder bed fusion using fringe projection
Zhang, B., Ziegert, J. C., Farahi, F., & Davies, A. D. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.08.001 · Cited by 167
Flaw detection in powder bed fusion using optical imaging
Abdelrahman, M., Reutzel, E. W., Nassar, A. R., et al. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.02.001 · Cited by 153
Online Quality Control of Selective Laser Melting
Craeghs, T., Clijsters, S., Yasa, E., & Kruth, J. (2011) · Lirias · doi:10.26153/tsw/15289 · Cited by 149
Error Detection in Laser Beam Melting Systems by High Resolution Imaging
Kleszczynski, S., Jacobsmühlen, J. Z., Sehrt, J. T., & Witt, G. (2012) · RWTH Publications (RWTH Aachen) · doi:10.26153/tsw/15404 · Cited by 138
High resolution imaging for inspection of laser beam melting systems
Jacobsmühlen, J. Z., Kleszczynski, S., Schneider, D., & Witt, G. (2013) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2013.6555507 · Cited by 95
Electron Beam Freeform Fabrication (EBF3) for Cost Effective Near-Net Shape Manufacturing
Taminger, K. M. B., & Hafley, R. A. (2006) · NASA Technical Reports Server (NASA) · Cited by 88
Sames, W. J. (2015) · Cited by 60
Detection of elevated regions in surface images from laser beam melting processes
Jacobsmühlen, J. Z., Kleszczynski, S., Witt, G., & Merhof, D. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392275 · Cited by 55
Fast Sliding Window Classification with Convolutional Neural Networks
Gouk, H., & Blake, A. M. (2014) · International Conference on Image and Vision Computing New Zealand (IVCNZ) · doi:10.1145/2683405.2683429 · Cited by 44
Electron Beam Freeform Fabrication for Cost Effective Near-Net Shape Manufacturing
Taminger, K. M. B., & Hafley, R. A. (n.d.) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 44
A machine vision system for in-situ quality inspection in metal powder-bed additive manufacturing
Aminzadeh, M. (2016) · SMARTech Repository (Georgia Institute of Technology) · Cited by 20
Layer by Layer Validation of Geometrical Accuracy in Additive Manufacturing Processes
Zeng, K., Patil, N., Gu, H., et al. (2013) · doi:10.26153/tsw/15415 · Cited by 17
Homography estimation from planar contours in image sequence
Zhai, M., Fu, S., & Jing, Z. (2010) · Optical Engineering · doi:10.1117/1.3364071 · Cited by 15
Robust calibration marker detection in powder bed images from laser beam melting processes
Jacobsmühlen, J. Z., Achterhold, J., Kleszczynski, S., et al. (2016) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2016.7474873 · Cited by 7
Cited by
Machine learning in additive manufacturing: State-of-the-art and perspectives
Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101538 · Cited by 693
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Machine Learning for industrial applications: A comprehensive literature review
Bertolini, M., Mezzogori, D., Neroni, M., & Zammori, F. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.114820 · Cited by 553
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Masoud Ghoreishi Mokri, S., Valadbeygi, N., & G. Stelnikova, I. (2024) · International Journal of Innovative Science and Research Technology (IJISRT) · doi:10.38124/ijisrt/ijisrt24feb1059 · Cited by 511
Metadata
- Authors
- Scime, L., & Beuth, J.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 24
- Pages
- 273-286
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2895046268
- Cited by
- 322
- References
- 31
- FWCI
- 15.03
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.