The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
4D printing materials for vat photopolymerization
Abstract
Abstract Vat photopolymerization is a widely adopted additive manufacturing process category owing to its high accuracy and accessibility. These technologies utilize a light source to cure the surface of a vat filled with liquid photopolymer resin layer by layer and recent developments in resin composition have led to developments in 4D printing. 4D printing is an extension of 3D printing in which the object transforms itself into a predefined structure upon the application of external stimuli such as heat, humidity, or light amongst others. This review paper presents a comprehensive review on the materials used to manufacture stimuli-responsive/shape morphing structures via vat photopolymerization technologies (stereolithography (SLA), micro-SLA (PµSL), digital light processing (DLP), and volumetric printing). Overall, the literature review has shown that acrylate-based resins are the most widely used for 4D printing and DLP is the most widely adopted technology owing to the possibility of implementing grayscale lithography. The goal of this review is to emphasize the need for new materials and faster development to enable further applications and wider adoption of this technology in industry and not only research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Water-driven programmable polyurethane shape memory polymer: Demonstration and mechanism
Huang, W. M., Yang, B., An, L., Li, C., & Chan, Y. S. (2005) · Applied Physics Letters · doi:10.1063/1.1880448 · Cited by 616
Review of electro-active shape-memory polymer composite
Liu, Y., Lv, H., Lan, X., Leng, J., & Du, S. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.08.016 · Cited by 548
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Thermomechanics of the shape memory effect in polymers for biomedical applications
Gall, K., Yakacki, C. M., Liu, Y., Shandas, R., Willett, N., & Anseth, K. S. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30296 · Cited by 351
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Metadata
- Authors
- Andreu, A., Su, P.-C., Kim, J.-H., Ng, C. S., Kim, S., Kim, I., Lee, J., Noh, J., Subramanian, A. S., & Yoon, Y.-J.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 44
- Pages
- 102024
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3161800125
- Cited by
- 181
- References
- 13
- FWCI
- 10.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 4D printing materials for vat photopolymerization. https://app.cochat.ai/papers/10.1016/j.addma.2021.102024
- The paper
- Andreu, A., Su, P.-C., Kim, J.-H., Ng, C. S., Kim, S., Kim, I., Lee, J., Noh, J., Subramanian, A. S., & Yoon, Y.-J. (2021). 4D printing materials for vat photopolymerization. Additive Manufacturing. https://doi.org/10.1016/j.addma.2021.102024
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.