The DOI matches its Crossref record; 190 of the 190 references it cites were found in a registry or an index.
Polymeric drug delivery systems by additive manufacturing
Open accessAbstract
Additive manufacturing (AM) is gaining interests in drug delivery applications, offering innovative opportunities for the design and development of systems with complex geometry and programmed controlled release profile. In addition, polymer-based drug delivery systems can improve drug safety, efficacy, patient compliance, and are the key materials in AM. Therefore, combining AM and polymers can be beneficial to overcome the existing limitations in the development of controlled release drug delivery systems. Considering these advantages, here we are focusing on the recent developments in the field of polymeric drug delivery systems prepared by AM. This review provides a comprehensive overview on a holistic polymer-AM perspective for drug delivery systems with discussion on the materials, properties, design and fabrication techniques and the mechanisms used to achieve a controlled release system. The current challenges and future perspectives for personalized medicine and clinical use of these systems are also briefly discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanisms of solute release from porous hydrophilic polymers
Korsmeyer, R. W., Gurny, R., Doelker, E., Buri, P., & Peppas, N. A. (1983) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(83)90064-9 · Cited by 5,258
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Makadia, H. K., & Siegel, S. J. (2011) · Polymers · doi:10.3390/polym3031377 · Cited by 4,816 · cited 1×
“PLGA is an aliphatic polyester that is formed through the copolymerization of lactic and glycolic acid monomers to yield different formulations depending on their copolymer composition [174].”
BackgroundThe return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 1×
“Degradation behavior for degradable polymers: (a) surface erosion, (b) bulk degradation and (c) bulk degradation with autocatalysis [156].”
BackgroundStatistical Mechanics of Cross-Linked Polymer Networks II. Swelling
Flory, P. J., & Rehner, J. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723792 · Cited by 3,865
Strategies in the design of nanoparticles for therapeutic applications
Petros, R. A., & DeSimone, J. M. (2010) · Nature Reviews Drug Discovery · doi:10.1038/nrd2591 · Cited by 3,651
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Statistical Mechanics of Cross-Linked Polymer Networks I. Rubberlike Elasticity
Flory, P. J., & Rehner, J. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723791 · Cited by 2,421
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Rate of Release of Medicaments from Ointment Bases Containing Drugs in Suspension
Higuchi, T. (1961) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.2600501018 · Cited by 2,262
Jain, R. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00115-0 · Cited by 2,214
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Overcoming the challenges in administering biopharmaceuticals: Formulation and delivery strategies
Mitragotri, S., Burke, P. A., & Langer, R. (2014) · Nature Reviews Drug Discovery · doi:10.1038/nrd4363 · Cited by 1,702
Drug delivery systems: An updated review
Tiwari, G., Tiwari, R., Bannerjee, S., Bhati, L., Pandey, S., Pandey, P., & Sriwastawa, B. (2012) · International Journal of Pharmaceutical Investigation · doi:10.4103/2230-973x.96920 · Cited by 1,671
Polymers for Drug Delivery Systems
Liechty, W. B., Kryscio, D. R., Slaughter, B. V., & Peppas, N. A. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100847 · Cited by 1,608
Fu, Y., & Kao, W. J. (2010) · Expert Opinion on Drug Delivery · doi:10.1517/17425241003602259 · Cited by 1,305
Particle shape: A new design parameter for micro- and nanoscale drug delivery carriers
Champion, J. A., Katare, Y. K., & Mitragotri, S. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.03.022 · Cited by 1,206
Kocak, G., Tuncer, C., & Bütün, V. (2017) · Polymer Chemistry · doi:10.1039/c6py01872f · Cited by 1,189
Mesoporous Silica Nanoparticle Nanocarriers: Biofunctionality and Biocompatibility
Tarn, D., Ashley, C. E., Xue, M., Carnes, E. C., Zink, J. I., & Brinker, C. J. (2013) · Accounts of Chemical Research · doi:10.1021/ar3000986 · Cited by 949
Polymer–drug conjugate therapeutics: advances, insights and prospects
Ekladious, I., Colson, Y. L., & Grinstaff, M. W. (2019) · Nature Reviews Drug Discovery · doi:10.1038/s41573-018-0005-0 · Cited by 855
Handbook of Pharmaceutical Controlled Release Technology
Wise, D. L. (2000) · CRC Press eBooks · doi:10.1201/9781482289985 · Cited by 768
The origins and evolution of “controlled” drug delivery systems
Hoffman, A. S. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2008.08.012 · Cited by 738
Recent advances in polymeric drug delivery systems
Sung, Y. K., & Kim, S. W. (2020) · Biomaterials Research · doi:10.1186/s40824-020-00190-7 · Cited by 732
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole, J., & Amighi, K. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.071 · Cited by 660
PEG — A versatile conjugating ligand for drugs and drug delivery systems
Kolate, A., Baradia, D., Patil, S., Vhora, I., Kore, G., & Misra, A. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.06.046 · Cited by 648
Xing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
An overview of polymer latex film formation and properties
Steward, P. A., Hearn, J., & Wilkinson, M. C. (2000) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(99)00037-8 · Cited by 603
Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
Patil, H., Tiwari, R. V., & Repka, M. A. (2016) · AAPS PharmSciTech · doi:10.1208/s12249-015-0360-7 · Cited by 584
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577 · cited 3×
“In all studies, around 100% drug loading was observed meaning the drugs did not degrade during the sintering process [147,152,153].”
BackgroundWen, H., Jung, H., & Li, X. (2015) · The AAPS Journal · doi:10.1208/s12248-015-9814-9 · Cited by 574
3D-Printed Biodegradable Microswimmer for Theranostic Cargo Delivery and Release
Ceylan, H., Yasa, I. C., Yasa, O., Tabak, A. F., Giltinan, J., & Sitti, M. (2019) · ACS Nano · doi:10.1021/acsnano.8b09233 · Cited by 558
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 554
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Khaled, S. A., Burley, J. C., Alexander, M. R., & Roberts, C. J. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.021 · Cited by 511
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
Measurement of anisotropic compressive strength of rapid prototyping parts
Lee, C. S., Kim, S. G., Kim, H. J., & Ahn, S. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.11.095 · Cited by 504
Goyanes, A., Det-Amornrat, U., Wang, J., Basit, A. W., & Gaisford, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.034 · Cited by 490
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Non‐isocyanate polyurethanes: synthesis, properties, and applications
Rokicki, G., Parzuchowski, P. G., & Mazurek, M. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3522 · Cited by 421
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Zhang, J., Feng, X., Patil, H., Tiwari, R. V., & Repka, M. A. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.12.049 · Cited by 393
Stewart, S. A., Domínguez-Robles, J., Donnelly, R. F., & Larrañeta, E. (2018) · Polymers · doi:10.3390/polym10121379 · Cited by 390
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Azad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020124 · Cited by 356
Biodegradable 3D printed polymer microneedles for transdermal drug delivery
Luzuriaga, M. A., Berry, D. R., Reagan, J. C., Smaldone, R. A., & Gassensmith, J. J. (2018) · Lab on a Chip · doi:10.1039/c8lc00098k · Cited by 356
Goyanes, A., Fina, F., Martorana, A., Sedough, D., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.021 · Cited by 355
The Use of Poly(N-vinyl pyrrolidone) in the Delivery of Drugs: A Review
Franco, P., & De Marco, I. (2020) · Polymers · doi:10.3390/polym12051114 · Cited by 355
3D printed microneedles for insulin skin delivery
Pere, C. P. P., Economidou, S. N., Lall, G., Ziraud, C., Boateng, J. S., Alexander, B. D., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.03.031 · Cited by 349
Nanoscale Self-Assembly for Therapeutic Delivery
Yadav, S., Sharma, A. K., & Kumar, P. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00127 · Cited by 324
Additive Processing of Polymers
Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., & Schmachtenberg, E. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800121 · Cited by 314
3D printed microneedle patches using stereolithography (SLA) for intradermal insulin delivery
Economidou, S. N., Pere, C. P. P., Reid, A., Uddin, M. J., Windmill, J. F. C., Lamprou, D. A., & Douroumis, D. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.04.063 · Cited by 311
Li, J., Rossignol, F., & Macdonald, J. (2015) · Lab on a Chip · doi:10.1039/c5lc00235d · Cited by 307
Current Status and Future Prospects
Wood, C., Baker, G., & Trounson, A. (1984) · Clinical In Vitro Fertilization · doi:10.1007/978-1-4471-3317-9_2 · Cited by 300
Fabricating 3D printed orally disintegrating printlets using selective laser sintering
Fina, F., Madla, C. M., Goyanes, A., Zhang, J., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.02.015 · Cited by 300
Melocchi, A., Parietti, F., Loreti, G., Maroni, A., Gazzaniga, A., & Zema, L. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.07.016 · Cited by 299
Shaping the future: recent advances of 3D printing in drug delivery and healthcare
Trenfield, S. J., Awad, A., Madla, C. M., Hatton, G. B., Firth, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2019) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2019.1660318 · Cited by 299
Swelling-controlled release in hydrogel matrices for oral route
Colombo, P. (1993) · Advanced Drug Delivery Reviews · doi:10.1016/0169-409x(93)90026-z · Cited by 294
Goyanes, A., Madla, C. M., Umerji, A., Duran Piñeiro, G., Giraldez Montero, J. M., Lamas Diaz, M. J., Gonzalez Barcia, M., Taherali, F., Sánchez-Pintos, P., Couce, M.-L., et al. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118497 · Cited by 292
Biopolymer Composites With High Dielectric Performance: Interface Engineering
Deshmukh, K., Basheer Ahamed, M., Deshmukh, R. R., Khadheer Pasha, S. K., Bhagat, P. R., & Chidambaram, K. (2017) · Biopolymer Composites in Electronics · doi:10.1016/b978-0-12-809261-3.00003-6 · Cited by 289
Kyobula, M., Adedeji, A., Alexander, M. R., Saleh, E., Wildman, R., Ashcroft, I., Gellert, P. R., & Roberts, C. J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.06.025 · Cited by 288
Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
Genina, N., Holländer, J., Jukarainen, H., Mäkilä, E. M., Salonen, J., & Sandler, N. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2015.11.005 · Cited by 285
Okwuosa, T. C., Pereira, B. C., Arafat, B., Cieszynska, M., Isreb, A., & Alhnan, M. A. (2017) · Pharmaceutical Research · doi:10.1007/s11095-016-2073-3 · Cited by 277
Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
Martinez, P. R., Goyanes, A., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.003 · Cited by 274
Solanki, N. G., Tahsin, M., Shah, A. V., & Serajuddin, A. T. M. (2018) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.10.021 · Cited by 272
3D printing applications for transdermal drug delivery
Economidou, S. N., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.031 · Cited by 270
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
Maroni, A., Melocchi, A., Parietti, F., Foppoli, A., Zema, L., & Gazzaniga, A. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.10.008 · Cited by 268
Charoo, N. A., Barakh Ali, S. F., Mohamed, E. M., Kuttolamadom, M. A., Ozkan, T., Khan, M. A., & Rahman, Z. (2020) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2020.1764027 · Cited by 268
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fina, F., Goyanes, A., Madla, C. M., Awad, A., Trenfield, S. J., Kuek, J. M., Patel, P., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.05.044 · Cited by 265
Effect of Particle Size on Drug Loading and Release Kinetics of Gefitinib-Loaded PLGA Microspheres
Chen, W., Palazzo, A., Hennink, W. E., & Kok, R. J. (2017) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.6b00896 · Cited by 262
A 3D-printed local drug delivery patch for pancreatic cancer growth suppression
Yi, H.-G., Choi, Y.-J., Kang, K. S., Hong, J. M., Pati, R. G., Park, M. N., Shim, I. K., Lee, C. M., Kim, S. C., & Cho, D.-W. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.06.015 · Cited by 260
Holländer, J., Genina, N., Jukarainen, H., Khajeheian, M., Rosling, A., Mäkilä, E., & Sandler, N. (2016) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2015.12.012 · Cited by 252
Hung, K.-C., Tseng, C.-S., Dai, L.-G., & Hsu, S.-H. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.019 · Cited by 251
Beck, R. C. R., Chaves, P. S., Goyanes, A., Vukosavljevic, B., Buanz, A., Windbergs, M., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.074 · Cited by 249
Patient acceptability of 3D printed medicines
Goyanes, A., Scarpa, M., Kamlow, M., Gaisford, S., Basit, A. W., & Orlu, M. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.07.064 · Cited by 246
Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process
Goyanes, A., Allahham, N., Trenfield, S. J., Stoyanov, E., Gaisford, S., & Basit, A. W. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118471 · Cited by 246
Xu, X., Robles-Martinez, P., Madla, C. M., Joubert, F., Goyanes, A., Basit, A. W., & Gaisford, S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101071 · Cited by 231
3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
Awad, A., Fina, F., Trenfield, S. J., Patel, P., Goyanes, A., Gaisford, S., & Basit, A. W. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11040148 · Cited by 229
Siepmann, J., & Peppas, N. A. (2000) · Pharmaceutical Research · doi:10.1023/a:1026455822595 · Cited by 222
3D printing of vaginal rings with personalized shapes for controlled release of progesterone
Fu, J., Yu, X., & Jin, Y. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.036 · Cited by 222
M3DISEEN: A novel machine learning approach for predicting the 3D printability of medicines
Elbadawi, M., Muñiz Castro, B., Gavins, F. K. H., Ong, J. J., Gaisford, S., Pérez, G., Basit, A. W., Cabalar, P., & Goyanes, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119837 · Cited by 220
Zhou, W., Qiao, Z., Nazarzadeh Zare, E., Huang, J., Zheng, X., Sun, X., Shao, M., Wang, H., Wang, X., Chen, D., et al. (2020) · Journal of Medicinal Chemistry · doi:10.1021/acs.jmedchem.9b02115 · Cited by 209
3D printing of tablets using inkjet with UV photoinitiation
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Sharpe, S., Yoo, J., Hague, R. J. M., Tuck, C. J., & Wildman, R. D. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.085 · Cited by 207
3D printing of a wearable personalized oral delivery device: A first-in-human study
Liang, K., Carmone, S., Brambilla, D., & Leroux, J.-C. (2018) · Science Advances · doi:10.1126/sciadv.aat2544 · Cited by 205
Gioumouxouzis, C. I., Baklavaridis, A., Katsamenis, O. L., Markopoulou, C. K., Bouropoulos, N., Tzetzis, D., & Fatouros, D. G. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.04.020 · Cited by 201
Polymeric implants for cancer chemotherapy
Fung, L. K., & Saltzman, W. M. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00036-7 · Cited by 198
Melocchi, A., Uboldi, M., Inverardi, N., Briatico-Vangosa, F., Baldi, F., Pandini, S., Scalet, G., Auricchio, F., Cerea, M., Foppoli, A., et al. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118700 · Cited by 197
Selective Laser Sintering 3D Printing of Orally Disintegrating Printlets Containing Ondansetron
Allahham, N., Fina, F., Marcuta, C., Kraschew, L., Mohr, W., Gaisford, S., Basit, A. W., & Goyanes, A. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020110 · Cited by 194
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Aho, J., Boetker, J. P., Baldursdottir, S., & Rantanen, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.009 · Cited by 191
Biodegradable Polymers for Biomedical Additive Manufacturing
Puppi, D., & Chiellini, F. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100700 · Cited by 191
Pereira, B. C., Isreb, A., Forbes, R. T., Dores, F., Habashy, R., Petit, J.-B., Alhnan, M. A., & Oga, E. F. (2019) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2018.12.009 · Cited by 189
Arafat, B., Wojsz, M., Isreb, A., Forbes, R. T., Isreb, M., Ahmed, W., Arafat, T., & Alhnan, M. A. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.03.019 · Cited by 186
Melocchi, A., Inverardi, N., Uboldi, M., Baldi, F., Maroni, A., Pandini, S., Briatico-Vangosa, F., Zema, L., & Gazzaniga, A. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.01.045 · Cited by 186
Simpson, R. L., Wiria, F. E., Amis, A. A., Chua, C. K., Leong, K. F., Hansen, U. N., Chandrasekaran, M., & Lee, M. W. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30839 · Cited by 181
Yang, Y., Wang, H., Li, H., Ou, Z., & Yang, G. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.01.005 · Cited by 181
Kempin, W., Franz, C., Koster, L.-C., Schneider, F., Bogdahn, M., Weitschies, W., & Seidlitz, A. (2017) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2017.02.014 · Cited by 180
Teo, E. Y., Ong, S.-Y., Khoon Chong, M. S., Zhang, Z., Lu, J., Moochhala, S., Ho, B., & Teoh, S.-H. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.089 · Cited by 176
Ku, M. S., & Dulin, W. (2012) · Pharmaceutical Development and Technology · doi:10.3109/10837450.2010.535826 · Cited by 172
Kempin, W., Domsta, V., Grathoff, G., Brecht, I., Semmling, B., Tillmann, S., Weitschies, W., & Seidlitz, A. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2405-6 · Cited by 172
Multi-material, multi-technology FDM: exploring build process variations
Espalin, D., Alberto Ramirez, J., Medina, F., & Wicker, R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2012-0112 · Cited by 171
Polysarcosine as an Alternative to PEG for Therapeutic Protein Conjugation
Hu, Y., Hou, Y., Wang, H., & Lu, H. (2018) · Bioconjugate Chemistry · doi:10.1021/acs.bioconjchem.8b00237 · Cited by 166
3D Printed Tablets (Printlets) with Braille and Moon Patterns for Visually Impaired Patients
Awad, A., Yao, A., Trenfield, S. J., Goyanes, A., Gaisford, S., & Basit, A. W. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020172 · Cited by 161
Huang, W., Zheng, Q., Sun, W., Xu, H., & Yang, X. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.02.021 · Cited by 159
Isreb, A., Baj, K., Wojsz, M., Isreb, M., Peak, M., & Alhnan, M. A. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.04.017 · Cited by 159
Gelatin and Non-Gelatin Capsule Dosage Forms
Gullapalli, R. P., & Mazzitelli, C. L. (2017) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.02.006 · Cited by 156
Physical structure and thermal behavior of ethylcellulose
Davidovich‐Pinhas, M., Barbut, S., & Marangoni, A. G. (2014) · Cellulose · doi:10.1007/s10570-014-0377-1 · Cited by 154
Caudill, C. L., Perry, J. L., Tian, S., Luft, J. C., & DeSimone, J. M. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.05.042 · Cited by 151
Osmotic Drug Delivery System as a Part of Modified Release Dosage Form
Keraliya, R. A., Patel, C. A., Patel, P., Keraliya, V., Soni, T. G., Patel, R. C., & Patel, M. M. (2012) · ISRN Pharmaceutics · doi:10.5402/2012/528079 · Cited by 149
Zhu, M. C., Li, K., Zhu, Y., Zhang, J., & Ye, X. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.034 · Cited by 148
I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets
Januskaite, P., Xu, X., Ranmal, S. R., Gaisford, S., Basit, A. W., Tuleu, C., & Goyanes, Á. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12111100 · Cited by 144
Printing Tablets with Fully Customizable Release Profiles for Personalized Medicine
Sun, Y., & Soh, S. (2015) · Advanced Materials · doi:10.1002/adma.201504122 · Cited by 144
Pharmaceutical applications of 3D printing technology: current understanding and future perspectives
Park, B. J., Choi, H. J., Moon, S. J., Kim, S. J., Bajracharya, R., Min, J. Y., & Han, H. (2018) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-018-00414-y · Cited by 138
Kadry, H., Al-Hilal, T. A., Keshavarz, A. A., Alam, F., Xu, C., Joy, A., & Ahsan, F. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.04.010 · Cited by 136
Zaborenko, N., Shi, Z., Corredor, C. C., Smith, B. M., Zhang, L., Hermans, A., Neu, C. M., Alam, M. A., Cohen, M. J., Lu, X., et al. (2019) · The AAPS Journal · doi:10.1208/s12248-019-0297-y · Cited by 136
Li, Q., Wen, H., Jia, D., Guan, X., Pan, H., Yue, Y., Yu, S., Zhu, Z., Xiang, R., & Pan, W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.03.066 · Cited by 135
Ali, S. F. B., Mohamed, E. M., Ozkan, T., Kuttolamadom, M. A., Khan, M. A., Asadi, A., & Rahman, Z. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118651 · Cited by 132
3D Printing Factors Important for the Fabrication of Polyvinylalcohol Filament-Based Tablets
Tagami, T., Fukushige, K., Ogawa, E., Hayashi, N., & Ozeki, T. (2017) · Biological and Pharmaceutical Bulletin · doi:10.1248/bpb.b16-00878 · Cited by 131
Zhang, J., Vo, A. Q., Feng, X., Bandari, S., & Repka, M. A. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1097-x · Cited by 120
Sadia, M., Isreb, A., Abbadi, I., Isreb, M., Aziz, D., Abouselo, A., Timmins, P., & Alhnan, M. A. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.07.045 · Cited by 117
Photo-crosslinked synthetic biodegradable polymer networks for biomedical applications
van Bochove, B., & Grijpma, D. W. (2018) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2018.1553105 · Cited by 117
Lamichhane, S., Bashyal, S., Keum, T., Noh, G., Seo, J. E., Bastola, R., Choi, J., Sohn, D. H., & Lee, S. K. (2019) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2018.11.008 · Cited by 115
Conceição, J., Farto-Vaamonde, X., Goyanes, Á., Adeoye, O., Concheiro, Á., Cabral-Marques, H. M., Lobo, J. M. S., & Alvarez‐Lorenzo, C. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.084 · Cited by 114
Trenfield, S. J., Tan, H. X., Awad, A., Buanz, A. B. M., Gaisford, S., Basit, A. W., & Goyanes, Á. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.06.034 · Cited by 114
Solvent-dependent properties of electrospun fibrous composites for bone tissue regeneration
Patlolla, A., Collins, G. L., & Arinzeh, T. L. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.028 · Cited by 111
3D printed UV light cured polydimethylsiloxane devices for drug delivery
Holländer, J., Hakala, R. A., Suominen, J., Moritz, N., Yliruusi, J. K., & Sandler, N. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.11.016 · Cited by 111
Controlling release from 3D printed medical devices using CLIP and drug-loaded liquid resins
Bloomquist, C. J., Mecham, M. B., Paradzinsky, M., Janusziewicz, R., Warner, S. B., Luft, J. C., Mecham, S. J., Wang, A. Z., & DeSimone, J. M. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.03.026 · Cited by 111
Sustained Release of Human Growth Hormone from PLGA Solution Depots
Brodbeck, K. J., Pushpala, S., & McHugh, A. J. (1999) · Pharmaceutical Research · doi:10.1023/a:1018943107688 · Cited by 110
Melocchi, A., Uboldi, M., Maroni, A., Foppoli, A. A., Palugan, L., Zema, L., & Gazzaniga, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119155 · Cited by 109
Characterization of microfeatures in selective laser sintered drug delivery devices
Cheah, C. M., Leong, K. F., Chua, C. K., Low, K. H., & Quek, H. S. (2002) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/095441102321032166 · Cited by 108
3D printing of responsive hydrogels for drug-delivery systems
Larush, L., Kaner, I., Fluksman, A., Tamsut, A., Pawar, A. A., Lesnovski, P., Benny, O., & Magdassi, S. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0009 · Cited by 108
Fanous, M., Gold, S., Muller, S., Hirsch, S., Ogorka, J., & Imanidis, G. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119124 · Cited by 108
On-demand fully customizable drug tablets via 3D printing technology for personalized medicine
Tan, Y. J. N., Yong, W. P., Kochhar, J. S., Khanolkar, J., Yao, X., Sun, Y., Ao, C. K., & Soh, S. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.02.046 · Cited by 106
Bankoti, K., Rameshbabu, A. P., Datta, S., Maity, P. P., Goswami, P., Datta, P., Ghosh, S. K., Mitra, A., & Dhara, S. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.07.018 · Cited by 105
3D printed opioid medicines with alcohol-resistant and abuse-deterrent properties
Ong, J. J., Awad, A., Martorana, A., Gaisford, S., Stoyanov, E., Basit, A. W., & Goyanes, Á. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119169 · Cited by 101
Aita, I. E., Rahman, J., Breitkreutz, J., & Quodbach, J. (2020) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2020.09.012 · Cited by 101
Anti-biofilm multi drug-loaded 3D printed hearing aids
Vivero-Lopez, M., Xu, X., Muras, A., Otero, A., Concheiro, Á., Gaisford, S., Basit, A. W., Alvarez‐Lorenzo, C., & Goyanes, Á. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111606 · Cited by 99
3D Printed Polyvinyl Alcohol Tablets with Multiple Release Profiles
Xu, X., Zhao, J., Wang, M., Wang, L., & Yang, J. (2019) · Scientific Reports · doi:10.1038/s41598-019-48921-8 · Cited by 98
Teotia, A. K., Sami, H., & Kumar, A. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-713-2.00001-8 · Cited by 96
Self-citationGioumouxouzis, C. I., Tzimtzimis, E. K., Katsamenis, O. L., Dourou, A., Markopoulou, C. K., Bouropoulos, N., Tzetzis, D., & Fatouros, D. G. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2019.105176 · Cited by 96
van den Anker, J. N., McCune, S., Annaert, P., Baer, G., Mulugeta, Y. A., Abdelrahman, R. A., Wu, K., Krudys, K. M., Fisher, J. W., Slikker, W., et al. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12070685 · Cited by 96
Recent advances in polymer-based drug delivery systems for local anesthetics
Wang, B., Wang, S., Zhang, Q., Deng, Y., Li, X., Peng, L., Zuo, X., Piao, M., Kuang, X., Sheng, S., et al. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.044 · Cited by 92
Picker‐Freyer, K. M., & Dürig, T. (2007) · AAPS PharmSciTech · doi:10.1208/pt0804092 · Cited by 87
Injectable controlled release formulations incorporating protein crystals
Pechenov, S., Shenoy, B. C., Yang, M. X., Basu, S. K., & Margolin, A. L. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.01.019 · Cited by 87
Dexamethasone-loaded poly(ε-caprolactone) intravitreal implants: A pilot study
Fialho, S. L. (2007) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.08.004 · Cited by 84
Madžarević, M., Medarević, D. P., Vulović, A., et al. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11100544 · Cited by 82
Ibrahim, M., Barnes, M., McMillin, R. E., Cook, D. W., Smith, S. E., Halquist, M., Wijesinghe, D. S., & Roper, T. D. (2019) · AAPS PharmSciTech · doi:10.1208/s12249-019-1400-5 · Cited by 81
Cossé, A., König, C., Lamprecht, A., & Wagner, K. G. (2016) · AAPS PharmSciTech · doi:10.1208/s12249-016-0548-5 · Cited by 79
Pereira, B. C., Isreb, A., Isreb, M., Forbes, R. T., Oga, E. F., & Alhnan, M. A. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000236 · Cited by 78
Production of Drug Delivery Systems Using Fused Filament Fabrication: A Systematic Review
Shaqour, B., Samaro, A., Verleije, B., Beyers, K., Vervaet, C., & Cos, P. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12060517 · Cited by 78
Gioumouxouzis, C. I., Chatzitaki, A., Karavasili, C., Katsamenis, O. L., Tzetzis, D., Mystiridou, E., Bouropoulos, N., & Fatouros, D. G. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1084-2 · Cited by 75
Mohamed, E. M., Ali, S. F. B., Rahman, Z., Dharani, S., Ozkan, T., Kuttolamadom, M. A., & Khan, M. A. (2020) · AAPS PharmSciTech · doi:10.1208/s12249-020-01775-0 · Cited by 75
van Bochove, B., Hannink, G., Buma, P., & Grijpma, D. W. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600290 · Cited by 73
A large‐scale double‐stage‐screw 3 D printer for fused deposition of plastic pellets
Liu, X., Chi, B., Jiao, Z., Tan, J., Liu, F., & Yang, W. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45147 · Cited by 71
Melocchi, A., Parietti, F., Maccagnan, S., Ortenzi, M. A., Antenucci, S., Vangosa, F. B., Maroni, A., Gazzaniga, A., & Zema, L. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1029-9 · Cited by 71
Personalized 3D printed ciprofloxacin impregnated meshes for the management of hernia
Qamar, N., Abbas, N. A., Irfan, M., Hussain, A., Arshad, M. S., Latif, S., Mehmood, F., & Ghori, M. U. (2019) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2019.101164 · Cited by 71
Free-Radical-Mediated Protein Inactivation and Recovery during Protein Photoencapsulation
Lin, C., Sawicki, S. M., & Metters, A. T. (2007) · Biomacromolecules · doi:10.1021/bm700782c · Cited by 70
Farzan, A., Borandeh, S., Ezazi, N. Z., Lipponen, S., Santos, H. A., & Seppälä, J. V. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109988 · Cited by 70
Self-citationPreparation of Flexible and Elastic Poly(trimethylene carbonate) Structures by Stereolithography
Schüller-Ravoo, S., Feijén, J., & Grijpma, D. W. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100203 · Cited by 69
Bahadur, A., Shoaib, M., Iqbal, S., Saeed, A., Rahman, M. S. U., & Channar, P. A. (2018) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2018.07.014 · Cited by 64
Controlled and Sequential Delivery of Fluorophores from 3D Printed Alginate-PLGA Tubes
Do, A., Akkouch, A., Green, B. J., Ozbolat, I. T., Debabneh, A., Geary, S. M., & Salem, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1648-9 · Cited by 61
Do, A., Worthington, K. S., Tucker, B. A., & Salem, A. K. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.09.065 · Cited by 61
Saviano, M., Aquino, R. P., Gaudio, P. D., Sansone, F., & Russo, P. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.02.025 · Cited by 57
Mass-customization of oral tablets via the combination of 3D printing and injection molding
Fuenmayor, E. A., O’Donnell, C., Gately, N., Doran, P., Devine, D. M., Lyons, J. G., McConville, C., & Major, I. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118611 · Cited by 57
Warren, D. B., Bergström, C. A. S., Benameur, H., Porter, C. J. H., & Pouton, C. W. (2013) · Molecular Pharmaceutics · doi:10.1021/mp300576u · Cited by 56
Vehse, M., Petersen, S., Sternberg, K., Schmitz, K., & Seitz, H. (2014) · Macromolecular Symposia · doi:10.1002/masy.201400060 · Cited by 55
Dienel, K., van Bochove, B., & Seppälä, J. V. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01272 · Cited by 54
Self-citationEngineering Polymer Systems for Improved Drug Delivery
(2013) · Wiley eBooks · doi:10.1002/9781118747896 · Cited by 51
Fabrication of patient specific composite orbital floor implants by stereolithography
Geven, M. A., Varjas, V., Kamer, L., et al. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3589 · Cited by 51
Vaut, L., Juszczyk, J. J., Kamguyan, K., Jensen, K., Tosello, G., & Boisen, A. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01760 · Cited by 48
Solanki, N. G., Gumaste, S. G., Shah, A. V., & Serajuddin, A. T. M. (2019) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2019.05.010 · Cited by 46
Biodegradable Polymers in Drug Delivery Systems
Tsung, J., & Burgess, D. J. (2011) · Springer eBooks · doi:10.1007/978-1-4614-0881-9_5 · Cited by 44
Ilyés, K., Balogh, A., Casian, T., Igricz, T., Borbás, E., Démuth, B., Vass, P., Menyhárt, L., Kovács, N. K., Marosi, G., et al. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.06.024 · Cited by 44
Hsu, S., Dai, L., Hung, Y.-M., & Dai, N. (2018) · International Journal of Nanomedicine · doi:10.2147/ijn.s169825 · Cited by 43
Hjelmström, P., Nordbeck, E. B., & Tiberg, F. (2020) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2019.1706552 · Cited by 42
Electrospinning of plant oil‐based, non‐isocyanate polyurethanes for biomedical applications
Aduba, D. C., Zhang, K., Kanitkar, A., Sirrine, J. M., Verbridge, S. S., & Long, T. E. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46464 · Cited by 39
Long, J., Nand, A. V., Ray, S., Mayhew, S., White, D. E., Bunt, C. R., & Seyfoddin, A. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.07.002 · Cited by 32
Drug-releasing biopolymeric structures manufactured via stereolithography
Asikainen, S., van Bochove, B., & Seppälä, J. V. (2018) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/aaf0e0 · Cited by 31
Self-citationMönkäre, J., Hakala, R. A., Vlasova, M. A., Huotari, A., Kilpeläinen, M., Kiviniemi, A., Meretoja, V. V., Herzig, K., Korhonen, H., Seppälä, J. V., et al. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.06.005 · Cited by 29
Self-citationOmrani, I., Babanejad, N., Shendi, H. K., & Nabid, M. R. (2016) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.201600283 · Cited by 29
Introduction to polymeric drug delivery systems
Harrison, K. (2007) · Elsevier eBooks · doi:10.1533/9781845693640.33 · Cited by 27
Comparison of Free-Volume Theories
Vrentas, J. S., Vrentas, C. M., & Duda, J. L. (1993) · Polymer Journal · doi:10.1295/polymj.25.99 · Cited by 26
Govender, M., Indermun, S., Kumar, P., Choonara, Y. E., & Pillay, V. (2018) · Materials · doi:10.3390/ma11061006 · Cited by 21
Zhang, L., Shi, D., Shi, C., Kaneko, T., & Chen, M. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb01221d · Cited by 20
Roussenova, M., Hughes, D. J., Enrione, J. I., Díaz‐Calderón, P., Sivaniah, E., Song, Q., Ubbink, J., Beavis, P. W., Swain, A. C., & Alam, M. A. (2014) · Acta Physica Polonica A · doi:10.12693/aphyspola.125.801 · Cited by 18
Jansen, J., Mihov, G., Feijén, J., & Grijpma, D. W. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201100468 · Cited by 18
van Bochove, B., Spoljaric, S., Seppälä, J. V., & de Anda, A. R. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106740 · Cited by 15
Self-citationAdditive manufacturing of composite structures for the restoration of bone tissue
Geven, M. A., & Grijpma, D. W. (2019) · Multifunctional Materials · doi:10.1088/2399-7532/ab201f · Cited by 12
Current Polyesteric Systems for Advanced Drug Delivery
Sinha, V. R., Sharma, S., Silki, Kaur, M., & Sarwal, A. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-47347-7.00006-9 · Cited by 6
Küçükoflaz, M., Kaya, B. S., & Çağlayan, M. O. (2018) · Polymer-Plastics Technology and Materials · doi:10.1080/03602559.2018.1520252 · Cited by 6
Formulation, Analytical, and Regulatory Strategies for First‐in‐Human Clinical Trials
Capretto, L., Byrne, G., Trenfield, S. J., Dowden, L., & Booth, S. W. (2017) · Wiley eBooks · doi:10.1002/9781118907894.ch7 · Cited by 4
Research works printed but not linked: 21
- Luebbert, 2017, Moisture-induced phase separation and recrystallization in amorphous solid dispersions, Int. J. Pharm., 532, 635, 10.1016/j.ijpharm.2017.08.121 · doi:10.1016/j.ijpharm.2017.08.121
- Kogermann, 2013, Dissolution testing of amorphous solid dispersions, Int. J. Pharm., 444, 40, 10.1016/j.ijpharm.2013.01.042 · doi:10.1016/j.ijpharm.2013.01.042
- J.H. Richards, The Role of Polymer Permeability in the Control of Drug Release, in: Polym. Permeability, Springer Netherlands, Dordrecht, 1985, pp. 217–267. https://doi.org/10.1007/978-94-009-4858-7_6. · doi:10.1007/978-94-009-4858-7_6
- Hakala, 2013, Hydrolysis behaviour of crosslinked poly(ester anhydride) networks prepared from functionalised poly(ε-caprolactone) precursors, React. Funct. Polym., 73, 11, 10.1016/j.reactfunctpolym.2012.10.002 · DOI
- Rich, 2009, Porous Biodegradable Scaffold: Predetermined Porosity by Dissolution of Poly(ester-anhydride) Fibers from Polyester Matrix, Macromol. Biosci., 9, 654, 10.1002/mabi.200800306 · doi:10.1002/mabi.200800306
- Asikainen, 2019, Hydrolysis and drug release from poly(ethylene glycol)-modified lactone polymers with open porosity, Eur. Polym. J., 113, 165, 10.1016/j.eurpolymj.2019.01.056 · DOI
- Mönkäre, 2008, Controlled drug release from crosslinked poly(ester-anhydrides), Eur. J. Pharm. Sci., 34, S35, 10.1016/j.ejps.2008.02.098 · doi:10.1016/j.ejps.2008.02.098
- Petretta, 2019, 3D printing of musculoskeletal tissues: impact on safety and health at work, J. Toxicol. Environ. Heal. Part A., 82, 891, 10.1080/15287394.2019.1663458 · doi:10.1080/15287394.2019.1663458
- Dores, 2020, Temperature and solvent facilitated extrusion based 3D printing for pharmaceuticals, Eur. J. Pharm. Sci., 152, 10.1016/j.ejps.2020.105430 · doi:10.1016/j.ejps.2020.105430
- Rycerz, 2019, Embedded 3D Printing of Novel Bespoke Soft Dosage Form Concept for Pediatrics, Pharmaceutics., 11, 630, 10.3390/pharmaceutics11120630 · doi:10.3390/pharmaceutics11120630
- Melchels, 2010, Photo-Cross-Linked Poly(DL-lactide)-Based Networks. Structural Characterization by HR-MAS NMR Spectroscopy and Hydrolytic Degradation Behavior, Macromolecules, 43, 8570, 10.1021/ma1011705 · doi:10.1021/ma1011705
- Karakurt, 2020, Stereolithography (SLA) 3D printing of ascorbic acid loaded hydrogels: A controlled release study, Int. J. Pharm., 584, 10.1016/j.ijpharm.2020.119428 · doi:10.1016/j.ijpharm.2020.119428
- Jansen, 2012, Photo-crosslinked networks prepared from fumaric acid monoethyl ester-functionalized poly(d, l-lactic acid) oligomers and N-vinyl-2-pyrrolidone for the controlled and sustained release of proteins, Acta Biomater., 8, 3652, 10.1016/j.actbio.2012.06.011 · doi:10.1016/j.actbio.2012.06.011
- Gu, 2007, Maintenance of vascular endothelial growth factor and potentially other therapeutic proteins bioactivity during a photo-initiated free radical cross-linking reaction forming biodegradable elastomers, Eur. J. Pharm. Biopharm., 66, 21, 10.1016/j.ejpb.2006.08.006 · doi:10.1016/j.ejpb.2006.08.006
- van Bochove, 2019, Multiscale Structural Characterization of Biocompatible Poly(trimethylene carbonate) Photoreticulated Networks, ACS Appl. Polym. Mater., 1, 1811, 10.1021/acsapm.9b00338 · doi:10.1021/acsapm.9b00338
- Low, 2001, Characterization of SLS parts for drug delivery devices, Rapid Prototyp. J., 7, 262, 10.1108/13552540110410468 · doi:10.1108/13552540110410468
- I.C.C. de Moraes Porto, Polymerization, InTech, 2012. https://doi.org/10.5772/2750. · doi:10.5772/2750
- Becher, 2006, Pattern of cell death after in vitro exposure to GDMA, TEGDMA, HEMA and two compomer extracts, Dent. Mater., 22, 630, 10.1016/j.dental.2005.05.013 · doi:10.1016/j.dental.2005.05.013
- Tan, 2004, Nanoscale Compression of Polymer Microspheres by Atomic Force Microscopy, Langmuir, 20, 7015, 10.1021/la049597c · doi:10.1021/la049597c
- D. Cellulosics, ETHOCEL™: Ethylcellulose polymers technical handbook, TDC Co. (Ed.), Dow Cellul. (2005) 28.
- Homaee Borujeni, 2020, Three-dimensional (3D) printed tablets using ethyl cellulose and hydroxypropyl cellulose to achieve zero order sustained release profile, Cellulose, 27, 1573, 10.1007/s10570-019-02881-4 · doi:10.1007/s10570-019-02881-4
Cited by
Noureen, S., Noreen, S., Batool, F., Ghumman, S. A., Hasan, S., Aslam, S., & Ahmed, N. (2026) · RSC Pharmaceutics · doi:10.1039/d5pm00263j
Metadata
- Authors
- Borandeh, S., van Bochove, B., Teotia, A., & Seppälä, J.
- Venue
- Advanced Drug Delivery Reviews
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 173
- Pages
- 349-373
- ISSN
- 0169-409X (ISSN-L)
- OpenAlex
- W3145467218
- Cited by
- 254
- References
- 190
- FWCI
- 3.24
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- creativecommons.org/licenses/by-nc-nd/4.0/ (vor)
- Funders
- Suomen Akatemia
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.