Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 163

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Ultrafast fabrication of porous transition metal foams for efficient electrocatalytic water splitting

Zhou, Jianqing, Yu, Luo, Zhou, Qiancheng, Huang, Chuqiang, Zhang, Yuanlu, Yu, Bo, Yu, Ying·2021·Applied Catalysis B: Environmental

Abstract

Abstract Developing a facile strategy for universal synthesis of transition metal catalysts is significant to catalytic reactions but remains challenging. Herein, we report an ultrafast one-step electrodeposition method to prepare a series of transition metal foams within one minute for electrocatalytic water splitting. The porous metal foams not only possess unique 3D channels for rapid electrolyte diffusion and gas releasing, but also have robust integrated structures with enhanced conductivity for efficient charge transport. Consequently, the NiCo and NiFe foams only require 86 and 206 mV to output 10 mA cm−2 for hydrogen and oxygen evolution reactions (HER and OER) in 1 M KOH, respectively. Combining the two electrocatalysts, we have assembled an outstanding alkaline electrolyzer, requiring only 1.52 and 1.64 V to deliver 10 and 100 mA cm−2 respectively, outperforming the RuO2(+)//Pt/C(-) electrolyzer. Our study offers an ultrafast and general approach to fabricate 3D porous electrocatalysts for high-performance water splitting.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.apcatb.2021.120002

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Research works printed but not linked: 58

  1. Chu, 2012, Opportunities and challenges for a sustainable energy future, Nature, 488, 294, 10.1038/nature11475 · DOI · Paper page
  2. Yu, 2019, Non-noble metal-nitride based electrocatalysts for high-performance alkaline seawater electrolysis, Nat. Commun., 10, 5106, 10.1038/s41467-019-13092-7 · DOI · Paper page
  3. Liu, 2020, Porous Ni5P4 as a promising cocatalyst for boosting the photocatalytic hydrogen evolution reaction performance, Appl. Catal. B, 275, 10.1016/j.apcatb.2020.119144 · DOI · Paper page
  4. Kim, 2011, DeNOX performance of Ag/Al2O3 catalyst using simulated diesel fuel–ethanol mixture as reductant, Appl. Catal. B, 105, 1, 10.1016/j.apcatb.2011.03.017 · doi:10.1016/j.apcatb.2011.03.017
  5. Yu, 2018, Recent developments in earth-abundant and non-noble electrocatalysts for water electrolysis, Mater. Today Phys., 7, 121, 10.1016/j.mtphys.2018.11.007 · DOI · Paper page
  6. Tian, 2019, Hydrogen evolution and oxidation: mechanistic studies and material advances, Adv. Mater., 31, 10.1002/adma.201808066 · DOI · Paper page
  7. Li, 2021, “Green”, gradient multi-shell CuInSe2/(CuInSeXS1-X)5/CuInS2 quantum dots for photo-electrochemical hydrogen generation, Appl. Catal. B, 280, 10.1016/j.apcatb.2020.119402 · DOI
  8. Huang, 2019, Electrolyzer with hierarchical transition metal sulfide and phosphide towards overall water splitting, Mater. Today Phys., 11
  9. Xiao, 2019, Enhancing photocatalytic activity of tantalum nitride by rational suppression of bulk, interface and surface charge recombination, Appl. Catal. B, 246, 195, 10.1016/j.apcatb.2019.01.053 · DOI
  10. Das, 2016, One-step, integrated fabrication of Co2P nanoparticles encapsulated N, P dual-doped CNTs for highly advanced total water splitting, Nano Energy, 30, 303, 10.1016/j.nanoen.2016.10.024 · DOI · Paper page
  11. Zhang, 2019, Support and interface effects in water-splitting electrocatalysts, Adv. Mater., 31
  12. Shi, 2019, Robust noble metal-based electrocatalysts for oxygen evolution reaction, Chem. Soc. Rev., 48, 3181, 10.1039/C8CS00671G · DOI · Paper page
  13. Zhong, 2019, The pulsed laser-induced schottky junction via in-situ forming Cd clusters on CdS surfaces toward efficient visible light-driven photocatalytic hydrogen evolution, Appl. Catal. B, 258, 10.1016/j.apcatb.2019.117967 · DOI
  14. Mishra, 2018, Highly efficient hydrogen evolution by self-standing nickel phosphide-based hybrid nanosheet arrays electrocatalyst, Mater. Today Phys., 4, 1, 10.1016/j.mtphys.2018.01.001 · DOI
  15. Zhang, 2020, Nitrogen-coordinated metallic cobalt disulfide self-encapsulated in graphitic carbon for electrochemical water oxidation, Appl. Catal. B, 268, 10.1016/j.apcatb.2019.118449 · DOI
  16. Feng, 2017, Efficient hydrogen evolution electrocatalysis using cobalt nanotubes decorated with titanium dioxide nanodots, Angew. Chem. Int. Ed., 56, 2960, 10.1002/anie.201611767 · DOI · Paper page
  17. Kang, 2015, Universal activity function for predicting performance of Pd-based TWC as function of Pd loading and catalyst mileage, Chem. Eng. J., 259, 519, 10.1016/j.cej.2014.08.017 · doi:10.1016/j.cej.2014.08.017
  18. Ye, 2018, Activating CoOOH porous nanosheet arrays by partial iron substitution for efficient oxygen evolution reaction, Angew. Chem. Int. Ed., 57, 2672, 10.1002/anie.201712549 · DOI · Paper page
  19. Xu, 2018, Porous microrod arrays constructed by carbon-confined NiCo@NiCoO2 core@shell nanoparticles as efficient electrocatalysts for oxygen evolution, Adv. Mater., 30, 10.1002/adma.201705442 · DOI · Paper page
  20. Zhao, 2020, Boosting lattice oxygen oxidation of perovskite to efficiently catalyze oxygen evolution reaction by FeOOH decoration, Research, 2020, 10.34133/2020/6961578 · DOI · Paper page
  21. Kuang, 2019, 0D/3D MoS2-NiS2/N-doped graphene foam composite for efficient overall water splitting, Appl. Catal. B, 254, 15, 10.1016/j.apcatb.2019.04.072 · DOI · Paper page
  22. Yu, 2018, High-performance bifunctional porous non-noble metal phosphide catalyst for overall water splitting, Nat. Commun., 9, 2551, 10.1038/s41467-018-04746-z · DOI · Paper page
  23. Miao, 2020, “Carbohydrate-universal” electrolyzer for energy-saving hydrogen production with Co3FePx@NF as bifunctional electrocatalysts, Appl. Catal. B, 263, 10.1016/j.apcatb.2019.118109 · DOI
  24. Zhao, 2020, Elucidating the sources of activity and stability of FeP electrocatalyst for hydrogen evolution reactions in acidic and alkaline media, Appl. Catal. B, 260, 10.1016/j.apcatb.2019.118156 · DOI
  25. Huang, 2020, N-doped Ni-Mo based sulfides for high-efficiency and stable hydrogen evolution reaction, Appl. Catal. B, 276, 10.1016/j.apcatb.2020.119137 · DOI · Paper page
  26. Shang, 2020, Underwater superaerophobic Ni nanoparticle-decorated nickel–molybdenum nitride nanowire arrays for hydrogen evolution in neutral media, Nano Energy, 78, 10.1016/j.nanoen.2020.105375 · DOI · Paper page
  27. Zhou, 2019, Defective and ultrathin NiFe LDH nanosheets decorated on V-doped Ni3S2 nanorod arrays: a 3D core–shell electrocatalyst for efficient water oxidation, J. Mater. Chem. A, 7, 18118, 10.1039/C9TA06347A · DOI · Paper page
  28. Yu, 2017, Cu nanowires shelled with NiFe layered double hydroxide nanosheets as bifunctional electrocatalysts for overall water splitting, Energy Environ. Sci., 10, 1820, 10.1039/C7EE01571B · DOI · Paper page
  29. Song, 2020, Highly porous Ni–P electrode synthesized by an ultrafast electrodeposition process for efficient overall water electrolysis, J. Mater. Chem. A, 8, 12069, 10.1039/D0TA03739G · DOI
  30. Marozzi, 2000, Development of electrode morphologies of interest in electrocatalysis. Part 1: electrodeposited porous nickel electrodes, Electrochim. Acta, 45, 2111, 10.1016/S0013-4686(99)00422-3 · doi:10.1016/s0013-4686(99)00422-3
  31. Choi, 2018, Extremely small pyrrhotite Fe7S8 nanocrystals with simultaneous carbon-encapsulation for high-performance Na–ion batteries, Small, 14, 10.1002/smll.201702816 · doi:10.1002/smll.201702816
  32. Gong, 2018, A 3D well-matched electrode pair of Ni–Co–S//Ni–Co–P nanoarrays grown on nickel foam as a high-performance electrocatalyst for water splitting, J. Mater. Chem. A, 6, 12506, 10.1039/C8TA03163K · DOI
  33. Meng, 2019, Three-dimensionally hierarchical MoS2/graphene architecture for high-performance hydrogen evolution reaction, Nano Energy, 61, 611, 10.1016/j.nanoen.2019.04.049 · DOI · Paper page
  34. Huang, 2019, Zirconium-regulation-induced bifunctionality in 3D cobalt–iron oxide nanosheets for overall water splitting, Adv. Mater., 31, 10.1002/adma.201901439 · DOI · Paper page
  35. Nørskov, 2009, Towards the computational design of solid catalysts, Nat. Chem., 1, 37, 10.1038/nchem.121 · DOI · Paper page
  36. Liu, 2017, Enhanced electrocatalysis for energy-efficient hydrogen production over CoP catalyst with nonelectroactive Zn as a promoter, Adv. Energy Mater., 7, 10.1002/aenm.201700020 · DOI · Paper page
  37. Yu, 2018, Ternary Ni2(1-x)Mo2xP nanowire arrays toward efficient and stable hydrogen evolution electrocatalysis under large-current-density, Nano Energy, 53, 492, 10.1016/j.nanoen.2018.08.025 · DOI · Paper page
  38. Chen, 2020, Regulation of the electronic structure of Co4N with novel Nb to form hierarchical porous nanosheets for electrocatalytic overall water splitting, Mater. Today Phys., 15
  39. Bo, 2020, Operando raman spectroscopy reveals Cr-induced-phase reconstruction of NiFe and CoFe oxyhydroxides for enhanced electrocatalytic water oxidation, Chem. Mater., 32, 4303, 10.1021/acs.chemmater.0c01067 · DOI · Paper page
  40. Louie, 2013, An investigation of thin-film Ni–Fe oxide catalysts for the electrochemical evolution of oxygen, J. Am. Chem. Soc., 135, 12329, 10.1021/ja405351s · DOI · Paper page
  41. Song, 2019, An unconventional iron nickel catalyst for the oxygen evolution reaction, ACS Cent. Sci., 5, 558, 10.1021/acscentsci.9b00053 · DOI · Paper page
  42. Zhang, 2013, Structural evolution and characteristics of the phase transformations between α-Fe2O3, Fe3O4 and γ-Fe2O3 nanoparticles under reducing and oxidizing atmospheres, CrystEngComm, 15, 8166, 10.1039/c3ce41269e · DOI · Paper page
  43. Zhou, 2018, Water splitting by electrolysis at high current densities under 1.6 volts, Energy Environ. Sci., 11, 2858, 10.1039/C8EE00927A · DOI · Paper page
  44. Zhou, 2020, Regulating the electronic structure of CoP nanosheets by O incorporation for high-efficiency electrochemical overall water splitting, Adv. Funct. Mater., 30
  45. Zhao, 2018, Tuning electronic push/pull of Ni-based hydroxides to enhance hydrogen and oxygen evolution reactions for water splitting, ACS Catal., 8, 5621, 10.1021/acscatal.8b01567 · DOI · Paper page
  46. Zhang, 2018, Bifunctional heterostructure assembly of NiFe LDH nanosheets on NiCoP nanowires for highly efficient and stable overall water splitting, Adv. Funct. Mater., 28
  47. Yu, 2020, Highly disordered cobalt oxide nanostructure induced by sulfur incorporation for efficient overall water splitting, Nano Energy, 71, 10.1016/j.nanoen.2020.104652 · DOI
  48. Yang, 2019, Synergistic coupling of CoFe-LDH arrays with NiFe-LDH nanosheet for highly efficient overall water splitting in alkaline media, Appl. Catal. B, 253, 131, 10.1016/j.apcatb.2019.04.054 · DOI · Paper page
  49. Yang, 2020, Electronic redistribution: construction and modulation of interface engineering on CoP for enhancing overall water splitting, Adv. Funct. Mater., 30
  50. Yan, 2019, Chestnut-like copper cobalt phosphide catalyst for all-pH hydrogen evolution reaction and alkaline water electrolysis, J. Mater. Chem. A, 7, 14271, 10.1039/C9TA03686E · DOI
  51. Wang, 2018, Self-supported hierarchical nanostructured NiFe-LDH and Cu3P weaving mesh electrodes for efficient water splitting, ACS Sustainable Chem. Eng., 6, 380, 10.1021/acssuschemeng.7b02654 · DOI
  52. Shao, 2017, Improved electrocatalytic performance of core-shell NiCo/NiCoOx with amorphous FeOOH for oxygen-evolution reaction, Electrochim. Acta, 257, 1, 10.1016/j.electacta.2017.09.093 · DOI
  53. Long, 2018, Enhancing full water-splitting performance of transition metal bifunctional electrocatalysts in alkaline solutions by tailoring CeO2-transition metal oxides-Ni nanointerfaces, ACS Energy Lett., 3, 290, 10.1021/acsenergylett.7b01130 · DOI · Paper page
  54. Li, 2019, Monolithic electrode integrated of ultrathin NiFeP on 3D strutted graphene for bifunctionally efficient overall water splitting, Nano Energy, 58, 870, 10.1016/j.nanoen.2019.02.024 · DOI · Paper page
  55. Huang, 2020, Structural design of amorphous CoMoPx with abundant active sites and synergistic catalysis effect for effective water splitting, Adv. Funct. Mater., 10.1002/adfm.202003889 · DOI · Paper page
  56. Hsieh, 2019, NiFe/(Ni,Fe)3S2 core/shell nanowire arrays as outstanding catalysts for electrolytic water splitting at high current densities, Small Methods, 3
  57. Guo, 2020, Fe-doped Ni–Co phosphide nanoplates with planar defects as an efficient bifunctional electrocatalyst for overall water splitting, ACS Sustain. Chem. Eng., 8, 7436, 10.1021/acssuschemeng.0c01467 · DOI · Paper page
  58. Chen, 2018, Accelerated hydrogen evolution kinetics on NiFe-layered double hydroxide electrocatalysts by tailoring water dissociation active sites, Adv. Mater., 30

Cited by

See all 163

Metadata

Authors
Zhou, J., Yu, L., Zhou, Q., Huang, C., Zhang, Y., Yu, B., & Yu, Y.
Venue
Applied Catalysis B: Environmental
Publisher
Elsevier BV
Published
2021-07
Volume
288
Pages
120002
ISSN
0926-3373 (ISSN-L)
OpenAlex
W3132263669
Cited by
163
References
4
FWCI
5.77
Type
journal article
Language
en
Open access
closed
Funders
  • Wuhan Science and Technology Bureau Applied Fundamental Research of Wuhan
  • National Natural Science Foundation of China
  • Central China Normal University

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Ultrafast fabrication of porous transition metal foams for efficient electrocatalytic water splitting. https://app.cochat.ai/papers/10.1016/j.apcatb.2021.120002
The paper
Zhou, J., Yu, L., Zhou, Q., Huang, C., Zhang, Y., Yu, B., & Yu, Y. (2021). Ultrafast fabrication of porous transition metal foams for efficient electrocatalytic water splitting. Applied Catalysis B: Environmental. https://doi.org/10.1016/j.apcatb.2021.120002

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.