A kinetic reaction model for biomass pyrolysis processes in Aspen Plus
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
This paper presents a novel kinetic reaction model for biomass pyrolysis processes. The model is based on the three main building blocks of lignocellulosic biomass, cellulose, hemicellulose and lignin and can be readily implemented in Aspen Plus and easily adapted to other process simulation software packages. It uses a set of 149 individual reactions that represent the volatilization, decomposition and recomposition processes of biomass pyrolysis. A linear regression algorithm accounts for the secondary pyrolysis reactions, thus allowing the calculation of slow and intermediate pyrolysis reactions. The bio-oil is modelled with a high level of detail, using up to 33 model compounds, which allows for a comprehensive estimation of the properties of the bio-oil and the prediction of further upgrading reactions. After showing good agreement with existing literature data, our own pyrolysis experiments are reported for validating the reaction model. A beech wood feedstock is subjected to pyrolysis under well-defined conditions at different temperatures and the product yields and compositions are determined. Reproducing the experimental pyrolysis runs with the simulation model, a high coincidence is found for the obtained fraction yields (bio-oil, char and gas), for the water content and for the elemental composition of the pyrolysis products. The kinetic reaction model is found to be suited for predicting pyrolysis yields and product composition for any lignocellulosic biomass feedstock under typical pyrolysis conditions without the need for experimental data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856 · cited 1×
“Biomass pyrolysis is mainly in the research stage and almost no commercial 48 pyrolysis installations exist to-date [4,5].”
BackgroundSelf-citationKan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239 · cited 2×
“By varying 44 the reaction conditions, the yield of the fractions can be controlled: Fast pyrolysis maximizes the 45 liquid yield at temperatures around 500 °C and very short residence times, while slow pyrolysis 46 achieves high char yields at slightly lower temperatures around 450 °C and very long vapour 47 residenc…”
BackgroundModeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Bio-oil production and upgrading research: A review
Xiu, S., & Shahbazi, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.028 · Cited by 1,127 · cited 1×
“83 [36], assuming an interlinked linear reaction process for the three basic biomass building blocks 84 (cellulose, hemicellulose and lignin) [37,31].”
BackgroundThe role of biomass and bioenergy in a future bioeconomy: policies and facts
Scarlat, N., Dallemand, J.-F., Monforti-Ferrario, F., & Nita, V. (2015) · Environmental Development · doi:10.1016/j.envdev.2015.03.006 · Cited by 895
Techno-economic analysis of biomass fast pyrolysis to transportation fuels
Wright, M. M., Daugaard, D. E., Satrio, J. A., & Brown, R. C. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.029 · Cited by 814 · cited 1×
“[9] Wright MM, Satrio JA, Brown RC, Daugaard DE, Hsu DD.”
BackgroundBiomass pyrolysis-a review of modelling, process parameters and catalytic studies
Sharma, A., Pareek, V., & Zhang, D. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.193 · Cited by 675
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Fast Pyrolysis Bio-Oils from Wood and Agricultural Residues
Oasmaa, A., Solantausta, Y., Arpiainen, V., Kuoppala, E., & Sipilä, K. (2010) · Energy & Fuels · doi:10.1021/ef901107f · Cited by 407 · cited 2×
“Fractional composition of the bio-oil in comparison with literature data [57].”
BackgroundResultDetailed kinetic modeling of the thermal degradation of lignins
Faravelli, T., Frassoldati, A., Migliavacca, G., & Ranzi, E. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.10.018 · Cited by 376
Jones, S. B., Valkenburg, C., Walton, C. W., Elliott, D. C., Holladay, J. E., Stevens, D. J., Kinchin, C., & Czernik, S. (2009) · doi:10.2172/949907 · Cited by 320 · cited 1×
“[7] Jones SB, Valkenburg C, Walton CW, Elliott DC, Holladay JE, Stevens DJ, et al.”
BackgroundFuzzy logic-based predictive model for biomass pyrolysis
Lerkkasemsan, N. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.02.105 · Cited by 42
Cited by
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
A review of biomass gasification modelling
Safarian, S., Unnþórsson, R., & Richter, C. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.05.003 · Cited by 404
Bach, Q.-V., & Chen, W.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.087 · Cited by 368
Biogeochemical potential of biomass pyrolysis systems for limiting global warming to 1.5 °C
Werner, C., Schmidt, H.-P., Gerten, D., Lucht, W., & Kammann, C. (2018) · Environmental Research Letters · doi:10.1088/1748-9326/aabb0e · Cited by 69
“For the purpose of the present study, we selected a standard so-called rotary kiln type slow pyrolysis system with a HTT of 450 ◦C and no reactive or inert gas injection (Fagernäs et al 2012, Peters et al 2017).”
MethodChen, X., Zhang, H., & Xiao, R. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03172 · Cited by 45
Metadata
- Authors
- Peters, J. F., Banks, S. W., Bridgwater, A. V., & Dufour, J.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2017-02
- Volume
- 188
- Pages
- 595-603
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2562615780
- Cited by
- 145
- References
- 12
- FWCI
- 4.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.