Influence of operational condition on lithium plating for commercial lithium-ion batteries—Electrochemical experiments and post-mortem-analysis

Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries

Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408

Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study

Waldmann, T., Wilka, M. D., Kasper, M., Fleischhammer, M., & Wohlfahrt‐Mehrens, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.112 · Cited by 1,269

Lithium plating in a commercial lithium-ion battery – A low-temperature aging study

Petzl, M., Kasper, M., & Danzer, M. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.065 · Cited by 731

The effect of the charging protocol on the cycle life of a Li-ion battery

Zhang, S. S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.040 · Cited by 644

Mathematical Modeling of the Lithium Deposition Overcharge Reaction in Lithium‐Ion Batteries Using Carbon‐Based Negative Electrodes

Arora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586

Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries

Petzl, M., & Danzer, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.060 · Cited by 511

Charging protocols for lithium-ion batteries and their impact on cycle life—An experimental study with different 18650 high-power cells

Keil, P., & Jossen, A. (2016) · Journal of Energy Storage · doi:10.1016/j.est.2016.02.005 · Cited by 482

Direct in situ measurements of Li transport in Li-ion battery negative electrodes

Harris, S. J., Timmons, A., Baker, D. R., & Monroe, C. W. (2009) · Chemical Physics Letters · doi:10.1016/j.cplett.2009.12.033 · Cited by 439

In situ detection of lithium metal plating on graphite in experimental cells

Uhlmann, C., Illig, J., Ender, M., Schuster, R., & Ivers‐Tiffée, E. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.046 · Cited by 408

The Limits of Low-Temperature Performance of Li-Ion Cells

Huang, C. ‐., Sakamoto, J. S., Wolfenstine, J., & Surampudi, S. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393622 · Cited by 401

Lithium-ion battery aging mechanisms and life model under different charging stresses

Gao, Y., Jiang, J., Zhang, C., Zhang, W., Ma, Z., & Jiang, Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.084 · Cited by 398

Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction

Zinth, V., von Lüders, C., Hofmann, M., Hattendorff, J., Buchberger, I., Erhard, S. V., Rebelo-Kornmeier, J., Jossen, A., & Gilles, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.168 · Cited by 371

Physical characterization of the charging process of a Li-ion battery and prediction of Li plating by electrochemical modelling

Legrand, N., Knosp, B., Desprez, P., Lapicque, F., & Raël, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.130 · Cited by 357

In-Situ Detection of Lithium Plating Using High Precision Coulometry

Burns, J. C., Stevens, D. A., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0621506jes · Cited by 355

Study of the charging process of a LiCoO2-based Li-ion battery

Zhang, S., Xu, K., & Jow, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.087 · Cited by 312

Low-temperature charging of lithium-ion cells part I: Electrochemical modeling and experimental investigation of degradation behavior

Tippmann, S., Walper, D., Balboa, L., Spier, B., & Bessler, W. G. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.022 · Cited by 312

Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells

Schindler, S., Bauer, M., Petzl, M., & Danzer, M. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.044 · Cited by 301

Direct In-Situ Measurements of Li Transport in Li-ion Battery Negative Electrodes

Harris, S. J., Timmons, A., Kim, S. U., & Monroe, C. W. (2009) · ECS Meeting Abstracts · doi:10.1149/ma2009-02/8/654 · Cited by 291

Two-Dimensional Modeling of Lithium Deposition during Cell Charging

Tang, M. H.-M., Albertus, P. S., & Newman, J. S. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3095513 · Cited by 256

Low-Temperature Behavior of Li-Ion Cells

Lin, H.-P., Chua, D., Salomon, M., Shiao, H.-C., Hendrickson, M., Plichta, E., & Slane, S. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1368736 · Cited by 248

Effects of Electrolyte Composition on Lithium Plating in Lithium-Ion Cells

Smart, M., & Ratnakumar, B. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3544439 · Cited by 238

A new method for detecting lithium plating by measuring the cell thickness

Bitzer, B., & Gruhle, A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.142 · Cited by 237

Optimization of Charging Strategy by Prevention of Lithium Deposition on Anodes in high-energy Lithium-ion Batteries – Electrochemical Experiments

Waldmann, T., Kasper, M., & Wohlfahrt‐Mehrens, M. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.08.056 · Cited by 229

Rapid Charging of Lithium-Ion Batteries Using Pulsed Currents

Purushothaman, B., & Landau, U. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2161580 · Cited by 227

Interplay of Operational Parameters on Lithium Deposition in Lithium-Ion Cells: Systematic Measurements with Reconstructed 3-Electrode Pouch Full Cells

Waldmann, T., Hogg, B.-I., Kasper, M., Grolleau, S., Couceiro, C. G., Trad, K., Matadi, B. P., & Wohlfahrt‐Mehrens, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0591607jes · Cited by 226

Fast charging technique for high power LiFePO4 batteries: A mechanistic analysis of aging

Anseán, D., Dubarry, M., Devie, A., Liaw, B. Y., García, V. M., Viera, J. C., & Gonzalez, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.140 · Cited by 226

Studies on Charging Lithium-Ion Cells at Low Temperatures

Fan, J., & Tan, S. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2190029 · Cited by 211

Irreversible Capacities of Graphite in Low‐Temperature Electrolytes for Lithium‐Ion Batteries

Smart, M. C., Ratnakumar, B. V., Surampudi, S., Wang, Y., Zhang, X., Greenbaum, S. G., Hightower, A., Ahn, C. C., & Fultz, B. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392577 · Cited by 190

Lithium Plating Behavior in Lithium-Ion Cells

Bugga, R. V., & Smart, M. C. (2010) · ECS Transactions · doi:10.1149/1.3393860 · Cited by 187

Differential voltage analyses of high-power lithium-ion cells

Bloom, I., Christophersen, J. P., Abraham, D. P., & Gering, K. L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.054 · Cited by 178

In Situ Detection of Lithium Plating on Graphite Electrodes by Electrochemical Calorimetry

Downie, L. E., Krause, L. J., Burns, J. C., Jensen, L. D., Chevrier, V. L., & Dahn, J. R. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.049304jes · Cited by 161

Overcharge Effect on Morphology and Structure of Carbon Electrodes for Lithium-Ion Batteries

Lu, W., López, C. M., Liu, N., Vaughey, J. T., Jansen, A. N., & Dees Dennis, W. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.jes035205 · Cited by 131

Inhomogeneous degradation of graphite anodes in automotive lithium ion batteries under low-temperature pulse cycling conditions

Burow, D., Sergeeva, K., Calles, S., Schorb, K., Börger, A., Roth, C., & Heitjans, P. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.033 · Cited by 131

Low-temperature study of lithium-ion cells using a LiySn micro-reference electrode

Jansen, A. N., Dees, D. W., Abraham, D. P., Amine, K., & Henriksen, G. L. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.235 · Cited by 113

The effect of charging rate on the graphite electrode of commercial lithium-ion cells: A post-mortem study

Somerville, L., Bareño, J., Trask, S. E., Jennings, P., McGordon, A., Lyness, C., & Bloom, I. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.002 · Cited by 112

Low-Temperature Characterization of Lithium-Ion Carbon Anodes via Microperturbation Measurement

Wang, C.-S., Appleby, A., & Little, F. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1474427 · Cited by 90

Electrochemical performance and kinetics of Li1+x(Co1/3Ni1/3Mn1/3)1−xO2 cathodes and graphite anodes in low-temperature electrolytes

Smart, M., Whitacre, J., Ratnakumar, B., & Amine, K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.106 · Cited by 89

Lithium dendrite and solid electrolyte interphase investigation using OsO4

Zier, M., Scheiba, F., Oswald, S., Thomas, J., Goers, D., Scherer, T., Klose, M., Ehrenberg, H., & Eckert, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.134 · Cited by 83

Detection of Li Deposition by Glow Discharge Optical Emission Spectroscopy in Post-Mortem Analysis

Ghanbari, N., Waldmann, T., Kasper, M., Axmann, P., & Wohlfahrt‐Mehrens, M. (2015) · ECS Electrochemistry Letters · doi:10.1149/2.0041509eel · Cited by 61

Performance characteristics of lithium ion cells at low temperatures

Smart, M. C., Ratnakumar, B. V., Whitcanack, L. D., Chin, K. B., Rodriguez, M., & Surampudi, S. (2002) · IEEE Aerospace and Electronic Systems Magazine · doi:10.1109/maes.2002.1145732 · Cited by 55

Direct In Situ Observation and Numerical Simulations of Non-Shrinking-Core Behavior in an MCMB Graphite Composite Electrode

Harris, S. J., Rahani, E. K., & Shenoy, V. B. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.055209jes · Cited by 51

Performance characteristics of lithium ion cells at low temperatures

Smart, M., Ratnakumar, B., Whitcanack, L., Chin, K., Rodriguez, M., & Surampudi, S. (2002) · Seventeenth Annual Battery Conference on Applications and Advances. Proceedings of Conference (Cat. No.02TH8576) · doi:10.1109/bcaa.2002.986366 · Cited by 46

Material and Design Options for Avoiding Lithium Plating during Charging

Eberman, K. W., Gomadam, P. M., Jain, G., & Scott, E. R. (2010) · ECS Transactions · doi:10.1149/1.3414003 · Cited by 23

A Graphical Aid to Evaluation of Carbon‐Based Li‐Ion Electrodes

Whitehead, A., Perkins, M., & Owen, J. R. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837564 · Cited by 14

Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects

Weiß, M., Rueß, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,100

Application of electrochemical impedance spectroscopy to commercial Li-ion cells: A review

Meddings, N., Heinrich, M., Overney, F., Lee, J., Ruiz, V., Napolitano, E., Seitz, S., Hinds, G., Raccichini, R., Gaberšček, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228742 · Cited by 900

Characterization and performance evaluation of lithium-ion battery separators

Lagadec, M. F., Zahn, R., & Wood, V. C. (2018) · Nature Energy · doi:10.1038/s41560-018-0295-9 · Cited by 813

Lithium Plating Mechanism, Detection, and Mitigation in Lithium-Ion Batteries

Lin, X., Khosravinia, K., Hu, X., Li, J., & Lu, W. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100953 · Cited by 490

Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries

Yang, X., & Wang, C. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.069 · Cited by 368

Model based investigations of the low temperature behaviour of Lithium-ion batteries

Martínez, C. (2017) · OPen Access Repositorium der Universität Ulm (OPARU) (Ulm University) · doi:10.18725/oparu-33232

Lithium plating on the anode for lithium-ion batteries during long-term low temperature cycling

Zhang, G., Wei, X., Han, G., Dai, H., Zhu, J., Wang, X., Tang, X., & Ye, J. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229312 · Cited by 248

Lithium plating in a commercial lithium-ion battery – A low-temperature aging study

Petzl, M., Kasper, M., & Danzer, M. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.065 · Cited by 731

Lithium Plating Simulations in Commercial Lithium-Ion Batteries during Low-Temperature Charging

Cabañero, M. A., Gebel, A., Lorrmann, H., Sextl, G., Hein, S., Kallo, J., & Latz, A. (2016) · ECS Meeting Abstracts · doi:10.1149/ma2016-03/2/1215

Plating energy as a universal descriptor to classify accelerated cell failure under operational extremes

Rangarajan, S. P., Barsukov, Y., & Mukherjee, P. P. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100720 · Cited by 23