Assessing extraterrestrial regolith material simulants for in-situ resource utilisation based 3D printing
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
This research paper investigates the suitability of ceramic multi-component materials, which are found on the Martian and Lunar surfaces, for 3D printing (aka Additive Manufacturing) of solid structures. 3D printing is a promising solution as part of the cutting edge field of future in situ space manufacturing applications. 3D printing of physical assets from simulated Martian and Lunar regolith was successfully performed during this work by utilising laser-based powder bed fusion equipment. Extensive evaluation of the raw regolith simulants was conducted via Optical and Electron Microscopy (SEM), Visible–Near Infrared/Infrared (Vis–NIR/IR) Spectroscopy and thermal characterisation via Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The analysis results led to the characterisation of key properties of these multi-component ceramic materials with regard to their processability via powder bed fusion 3D printing. The Lunar and Martian simulant regolith analogues demonstrated spectral absorbance values of up to 92% within the Vis–NIR spectra. Thermal analysis demonstrated that these materials respond very differently to laser processing, with a high volatility (30% weight change) for the Martian analogue as opposed to its less volatile Lunar counterpart (<1% weight change). Results also showed a range of multiple thermal occurrences associated with melting, glass transition and crystallisation reactions. The morphological features of the powder particles are identified as contributing to densification limitations for powder bed fusion processing. This investigation has shown that – provided that the simulants are good matches for the actual regoliths – the lunar material is a viable candidate material for powder bed fusion 3D printing, whereas Martian regolith is not.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Spectral evidence for hydrated salts in recurring slope lineae on Mars
Ojha, L., Wilhelm, M. B., Murchie, S. L., McEwen, A. S., Wray, J. J., Hanley, J., Massé, M., & Chojnacki, M. (2015) · Nature Geoscience · doi:10.1038/ngeo2546 · Cited by 617
First demonstration on direct laser fabrication of lunar regolith parts
Krishna Balla, V., Roberson, L. B., O'Connor, G. W., Trigwell, S., Bose, S., & Bandyopadhyay, A. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211271992 · Cited by 186
Evaluations of lunar regolith simulants
Taylor, L. A., Pieters, C. M., & Britt, D. (2016) · Planetary and Space Science · doi:10.1016/j.pss.2016.04.005 · Cited by 183 · cited 1×
“For the time being, it is not possible to have a single simulant material that will satisfy all scientific or engineering investigations [15]; therefore the choice of an appropriate simulant has to be conducted according to the pertinent material properties that”
BackgroundLunar Contour Crafting - A Novel Technique for ISRU-Based Habitat Development
Khoshnevis, B., Bodiford, M., Burks, K., Ethridge, E., Tucker, D., Kim, W., Toutanji, H., & Fiske, M. (2005) · 43rd AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-538 · Cited by 138
Goulas, A., & Friel, R. J. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2015-0022 · Cited by 82
Self-citationThermal Properties of Lunar Regolith Simulants
Street, Jr., Ray, C., Rickman, D., & Scheiman, D. A. (2010) · Earth and Space 2010 · doi:10.1061/41096(366)28 · Cited by 26
Research works printed but not linked: 23
- Hufenbach, 2014, ESA strategic planning for space exploration, Space Policy, 30, 174, 10.1016/j.spacepol.2014.07.009 · DOI
- Gouache, 2011, Soil simulant sourcing for the ExoMars rover testbed, Planet. Space Sci., 59, 779, 10.1016/j.pss.2011.03.006 · DOI
- Happel, 1993, Indigenous materials for Lunar construction, Appl. Mech. Rev., 46, 313, 10.1115/1.3120360 · DOI · Paper page
- Sadeh, 1996, Infrastructure for a Lunar base, Adv. Sp. Res., 18, 139, 10.1016/0273-1177(96)00102-0 · doi:10.1016/0273-1177(96)00102-0
- Sen, 2005, Processing of lunar soil simulant for space exploration applications, Mater. Sci. Eng. A, 413–414, 592, 10.1016/j.msea.2005.08.172 · DOI
- Arslan, 2008, Experimental simulation of tensile behavior of lunar soil simulant JSC-1, Mater. Sci. Eng. A, 478, 201, 10.1016/j.msea.2007.05.113 · DOI
- Benaroya, 2008, Engineering of lunar bases, Acta Astronaut., 62, 277, 10.1016/j.actaastro.2007.05.001 · DOI
- Fateri, 2012, On-site additive manufacturing by selective laser melting of composite objects, vol. 305, 842
- Goulas, 2016, Additive manufacturing of physical assets by using ceramic multicomponent extra-terrestrial materials, Addit. Manuf., 10, 36, 10.1016/j.addma.2016.02.002 · DOI · Paper page
- Oravec, 2010, Design and characterization of GRC-1: a soil for lunar terramechanics testing in Earth-ambient conditions, J. Terramechanics, 47, 361, 10.1016/j.jterra.2010.04.006 · DOI
- Patrick, 2015, A qualitative study of the retention and release of volatile gases in JSC-1A lunar soil simulant at room temperature under ultrahigh vacuum (UHV) conditions, Icarus, 255, 30, 10.1016/j.icarus.2015.03.015 · DOI
- Allen, 1998, Martian soil stimulant available for scientific, educational study, Eos, Trans. Am. Geophys. Union, 79, 405, 10.1029/98EO00309 · DOI · Paper page
- Bonin, 2012, Extra-terrestrial igneous granites and related rocks: a review of their occurrence and petrogenesis, Lithos, 153, 3, 10.1016/j.lithos.2012.04.007 · DOI
- Roush, 1993, Infrared optical properties of Mars soil analog materials: palagonites, Lunar Planet. Inst., 32
- Tolochko, 2000, Absorptance of powder materials suitable for laser sintering, Rapid Prototyp. J., 6, 155, 10.1108/13552540010337029 · DOI · Paper page
- Monroy, 2013, Study of the pore formation on CoCrMo alloys by selective laser melting manufacturing process, Procedia Eng., 63, 361, 10.1016/j.proeng.2013.08.227 · DOI · Paper page
- Gaier, 2011, Thermal optical properties of Lunar dust simulants and their constituents, J. Thermophys. Heat Transf., 26, 573, 10.2514/1.T3838 · DOI
- Hopkinson, 2005, 10.1002/0470033991 · DOI · Paper page
- Ray, 2010, JSC-1A lunar soil simulant: characterization, glass formation, and selected glass properties, J. Non-Cryst. Solids, 2369, 10.1016/j.jnoncrysol.2010.04.049 · DOI
- Lumay, 2012, Measuring the flowing properties of powders and grains, Powder Technol., 224, 19, 10.1016/j.powtec.2012.02.015 · DOI · Paper page
- Olakanmi, 2012, Laser sintering of blended Al–Si powders, Rapid Prototyp. J., 18, 109, 10.1108/13552541211212096 · doi:10.1108/13552541211212096
- Kruth, 2003, Lasers and materials in selective laser sintering, Assem. Autom., 23, 357, 10.1108/01445150310698652 · DOI · Paper page
- Allen, 1998, JSC Mars-1: a Martian soil simulant, Space, 98, 469
Cited by
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Trapp, J., Rubenchik, A. M., Guss, G., & Matthews, M. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.08.006 · Cited by 509
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Isachenkov, M., Chugunov, S., Akhatov, I., & Shishkovsky, I. (2021) · Acta Astronautica · doi:10.1016/j.actaastro.2021.01.005 · Cited by 199
Solar sintering for lunar additive manufacturing
Fateri, M., Meurisse, A., Sperl, M., Urbina, D., Madakashira, H. K., Govindaraj, S., Gancet, J., Imhof, B., Hoheneder, W., Waclavicek, R., et al. (2019) · Journal of Aerospace Engineering · doi:10.1061/(asce)as.1943-5525.0001093 · Cited by 135
Metadata
- Authors
- Goulas, A., Binner, J. G. P., Harris, R. A., & Friel, R. J.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2017-03
- Volume
- 6
- Pages
- 54-61
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W2578132777
- Cited by
- 138
- References
- 6
- FWCI
- 5.18
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.