3D printing with moondust
Open accessThe DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Purpose: The purpose of this paper is to investigate the effect of the main process parameters of laser melting (LM) type additive manufacturing (AM) on multi-layered structures manufactured from JSC-1A Lunar regolith (Moondust) simulant powder. Design/methodology/approach: Laser diffraction technology was used to analyse and confirm the simulant powder material particle sizes and distribution. Geometrical shapes were then manufactured on a Realizer SLM™ 100 using the simulant powder. The laser-processed samples were analysed via scanning electron microscopy to evaluate surface and internal morphologies, X-ray fluorescence spectroscopy to analyse the chemical composition after processing, and the samples were mechanically investigated via Vickers micro-hardness testing. Findings: A combination of process parameters resulting in an energy density value of 1.011 J/mm 2 allowed the successful production of components directly from Lunar regolith simulant. An internal relative porosity of 40.8 per cent, material hardness of 670 ± 11 HV and a dimensional accuracy of 99.8 per cent were observed in the fabricated samples. Originality/value: This research paper is investigating the novel application of a powder bed fusion AM process category as a potential on-site manufacturing approach for manufacturing structures/components out of Lunar regolith (Moondust). It was shown that this AM process category has the capability to directly manufacture multi-layered parts out of Lunar regolith, which has potential applicability to future moon colonization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, these prints are characterized by remarkably high porosity, primarily attributed to the high melting point of soil minerals that do not fully liquefy during laser processing [122,126].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [126]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Moreover, the printed regolith is brittle due to the oxide ceramic elements it contains [126,132].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [126]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“While laser-based printing often results in materials with high porosity due to its sensitivity to the reflectivity of the processed material, impacting the overall mechanical properties of the final product [122,126], EBM is less influenced by the absorption characteristics of the material.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [126]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In contrast, laser-based and electron beam sintering technologies use high-powered energy beams with precise energy delivery in controlled environments, ensuring consistent quality and enabling intricate details with fine resolutions [124-126].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [126]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“These enhanced mechanical properties, compared to those reported by Goulas et al. [126,127], are attributed to the higher energy input, facilitating sufficient melting, improved fusion, and inter-layer bonding.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [126]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Absorptance of powder materials suitable for laser sintering
Tolochko, N. K., Khlopkov, Y. V., Mozzharov, S. E., Ignatiev, M. B., Laoui, T., & Titov, V. I. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337029 · Cited by 518
The manufacturing of hard tools from metallic powders by selective laser melting
Abe, F., Osakada, K., Shiomi, M., Uematsu, K., & Matsumoto, M. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00522-2 · Cited by 390
Ceramic components manufacturing by selective laser sintering
Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.085 · Cited by 351
First demonstration on direct laser fabrication of lunar regolith parts
Krishna Balla, V., Roberson, L. B., O'Connor, G. W., Trigwell, S., Bose, S., & Bandyopadhyay, A. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211271992 · Cited by 186 · cited 3×
“The fabricated parts were characterized to evaluate the influence of laser processing on the microstructure, constituent phases and chemistry of the material (Balla et al., 2010).”
BackgroundMethodJSC-1A lunar soil simulant: Characterization, glass formation, and selected glass properties
Ray, C. S., dos Reis, S. T., Sen, S., & O'Dell, J. S. (2010) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2010.04.049 · Cited by 157
Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process
Monroy, K., Delgado, J., & Ciurana, J. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.08.227 · Cited by 144
Characterization of lunar dust and a synopsis of available lunar simulants
Liu, Y., & Taylor, L. A. (2010) · Planetary and Space Science · doi:10.1016/j.pss.2010.11.007 · Cited by 95
Averyanova, M., Cicala, E. F., Bertrand, P., & Grevey, D. F. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193476 · Cited by 87
Indigenous Materials for Lunar Construction
Happel, J. A. (1993) · Applied Mechanics Reviews · doi:10.1115/1.3120360 · Cited by 77
Research works printed but not linked: 2
- Eckart, P. (2006), The Lunar Base Handbook: An Introduction to Lunar Base Design (GNRL USE), Brown-Churchill Series, McGraw-Hill, available at: http://books.google.co.uk/books?id=mp7dnQEACAAJ
- 1983, Handbook of Lunar Soils
Cited by
An Overview on 3D Printing Technology: Technological, Materials, and Applications
Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.089 · Cited by 2,050
The Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.148 · Cited by 1,000
Farries, K. W., Visintin, P., Smith, S. T., & van Eyk, P. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123627 · Cited by 169
Goulas, A., Binner, J. G. P., Harris, R. A., & Friel, R. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2016.11.004 · Cited by 138
Self-citationWang, Y., Hao, L., Li, Y., Sun, Q., Sun, M., Huang, Y., Li, Z., Tang, D., Wang, Y., & Xiao, L. (2022) · Applied Clay Science · doi:10.1016/j.clay.2022.106673 · Cited by 139
Metadata
- Authors
- Goulas, A., & Friel, R. J.
- Affiliations
- Loughborough University (GB)
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2016-10-17
- Volume
- 22
- Issue
- 6
- Pages
- 864-870
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2301266426
- Cited by
- 82
- References
- 21
- Citations by year
- 2026: 5 · 2025: 14 · 2024: 15 · 2023: 9 · 2022: 9 · 2021: 9 · 2020: 2 · 2019: 5 · 2018: 6 · 2017: 4 · 2016: 4
- FWCI
- 5.63
- Type
- journal article
- Language
- en
- Open access
- green
- figshare.com
- Licence
- cc-by-nc-nd
- www.emerald.com/insight/site-policies (tdm)
- Locations
- Rapid Prototyping Journal (publishedVersion)
- Loughborough University Research Repository (Loughborough University) (submittedVersion, cc-by-nc-nd)
- Loughborough University Institutional Repository (Loughborough University) (submittedVersion, cc-by-nc-nd)
- Lund University Publications (Lund University) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Keywords
- lunar regolith simulant, JSC-1A, laser melting, powder bed fusion, laser powder bed fusion, in-situ resource utilization, process parameters, energy density, porosity, microhardness, dimensional accuracy, multilayer structures, Moon colonization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printing with moondust. https://app.cochat.ai/papers/10.1108/rpj-02-2015-0022
- The paper
- Goulas, A., & Friel, R. J. (2016). 3D printing with moondust. Rapid Prototyping Journal. https://doi.org/10.1108/rpj-02-2015-0022
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.