The DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Electrospun nano- to microfiber fabrics made of biodegradable copolyesters: structural characteristics, mechanical properties and cell adhesion potential
Abstract
Nano- to micro-structured biodegradable poly(L-lactide-co-epsilon-caprolactone) (PLCL) fabrics were prepared by electrospinning. Electrospun microfiber fabrics with different compositions of PLCL (mol% in feed; 70/30, 50/50, and 30/70), poly(L-lactide) (PLL) and poly(epsilon-caprolactone) (PCL) were obtained using methylene chloride (MC) as a solvent. The PLL microfiber exhibited a nanoscale-pore structure with a pore diameter of approximately 200-800 nm at the surface and subsurface regions, whereas such a surface structure was hardly observed in other polymers containing CL. The microfiber fabric made of PLCL 50/50 was elastomeric. Nanoscale-fiber fabrics with PLCL 50/50 (approx. 0.3 or 1.2 microm in diameter) were electrospun using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a solvent. Mercury porosimetry showed that the decrease in the fiber diameter of the fabric decreased porosity, but increased fiber density and mechanical strength. Human umbilical vein endothelial cells (HUVECs) were adhered well and proliferated on the small-diameter-fiber fabrics (0.3 and 1.2 microm in diameter), both of which are dense fabrics, whereas markedly reduced cell adhesion, restricted cell spreading and no signs of proliferation were observed on the large-diameter-fiber fabric (7.0 microm in diameter). The potential biomedical application of electrospun PLCL 50/50 was discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In addition to its inherent properties, PLCL’s adaptability through surface modification, blending with bioactive molecules, and processing through advanced manufacturing techniques such as electrospinning, 3D printing, and supercritical carbon dioxide (scCO₂) foaming has extended its use to multiple fields [11–13].”
From Application of PLCL as a biodegradable polymer in biomedical engineering (2026) · cites this paper as [11]
Citations
Cites
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,572
Nanoengineering of Particle Surfaces
Caruso, F. (2001) · Advanced Materials · doi:10.1002/1521-4095(200101)13:1 · Cited by 2,484
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,429
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,253
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
Yoshimoto, H., Shin, Y.-S., Terai, H., & Vacanti, J. P. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00635-x · Cited by 1,975
Note on a Method of Determining the Distribution of Pore Sizes in a Porous Material
Washburn, E. W. (1921) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.7.4.115 · Cited by 1,914
COLLAGEN SUBSTRATA FOR STUDIES ON CELL BEHAVIOR
Elsdale, T., & Bard, J. (1972) · The Journal of Cell Biology · doi:10.1083/jcb.54.3.626 · Cited by 1,527
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y.-S., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,069
Mo, X., Xu, C. Y., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.042 · Cited by 803
Biodegradable Polymer Scaffolds with Well-Defined Interconnected Spherical Pore Network
Ma, P. X., & Choi, J. (2001) · Tissue Engineering · doi:10.1089/107632701300003269 · Cited by 621
Cited by
Sorted by citations
Items 301–400 of 607
Miyazu, K., Kawahara, D., Ohtake, H., Watanabe, G., & Matsuda, T. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31623 · Cited by 28
Self-citationDıkıcı, S., Claeyssens, F., & MacNeil, S. (2020) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-020-00263-7 · Cited by 28
Wali, A., Gorain, M., Kundu, G. C., & Badiger, M. V. (2024) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2024.100477 · Cited by 28
Buzgo, M., Jakubová, R., Míčková, A., Rampichová, M., Prosecká, E., Kochová, P., Lukáš, D., & Amler, E. (2012) · Nanomedicine · doi:10.2217/nnm.12.140 · Cited by 28
Jin, G., Li, Y., Prabhakaran, M. P., Tian, W., & Ramakrishna, S. (2014) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911514553525 · Cited by 29
Engineered Polymeric Biomaterials for Tissue Engineering
Wong, Y. S., Tay, C. Y., Wen, F., Venkatraman, S. S., & Tan, L. P. (2012) · Current Tissue Engineering · doi:10.2174/2211542011201010041 · Cited by 28
In vitro assessment of electrospun polyamide‐6 scaffolds for esophageal tissue engineering
Zhuravleva, M. N., Gilazieva, Z., Grigoriev, T. Е., Shepelev, A. D., Tenchurin, T. K., Kamyshinsky, R. A., Krasheninnikov, S. V., Орлов, С. В., Caralogli, G., Archipova, S., et al. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34116 · Cited by 28
Park, H. K., Joo, W., Gu, B. K., Ha, M. Y., You, S. J., & Chun, H. J. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.06.010 · Cited by 28
Bioengineered vascular grafts: improving vascular tissue engineering through scaffold design
McClure, M. J., Wolfe, P. S., Rodriguez, I. A., & Bowlin, G. L. (2011) · Journal of Drug Delivery Science and Technology · doi:10.1016/s1773-2247(11)50030-9 · Cited by 27
Branciforti, M. C., Custódio, T. A., Guerrini, L. M., Avérous, L., & Bretas, R. E. S. (2009) · Journal of Macromolecular Science Part B · doi:10.1080/10408390903060970 · Cited by 27
Bual, R. P., Kimura, H., Ikegami, Y., Shirakigawa, N., & Ijima, H. (2018) · Materialia · doi:10.1016/j.mtla.2018.11.014 · Cited by 27
Electrospinning and Polymer Nanofibers: Process Fundamentals
Bhattacharjee, P., & Rutledge, G. C. (2011) · Elsevier eBooks · doi:10.1016/b978-0-08-055294-1.00039-8 · Cited by 28
Maeda, T., Hagiwara, K., Yoshida, S., Hasebe, T., & Hotta, A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40606 · Cited by 27
Hu, C., Uchida, T., Tercero, C. R., Ikeda, S., Ooe, K., Fukuda, T., Arai, F., Negoro, M., & Kwon, G. (2012) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2012.02.002 · Cited by 27
Characterization by Mercury Porosimetry of Nonwoven Fiber Media with Deformation
Rutledge, G. C., Lowery, J. L., & Pai, C. (2009) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892500900400301 · Cited by 27
Watcharajittanont, N., Putson, C., Pripatnanont, P., & Meesane, J. (2019) · Journal of Biomaterials Applications · doi:10.1177/0885328219874601 · Cited by 26
Bimodal Porous Scaffolds by Sequential Electrospinning of Poly(glycolic acid) with Sucrose Particles
Wulkersdorfer, B., Kao, K. K., Agopian, V. G., Ahn, A., Dunn, J., Wu, B. M., & Stelzner, M. G. (2010) · International Journal of Polymer Science · doi:10.1155/2010/436178 · Cited by 26
Yari, A., Teimourian, S., Amidi, F., Bakhtiyari, M., Heidari, F., Sajedi, N., Veijouye, S. J., Dodel, M., & Nobakht, M. (2016) · Advanced Biomedical Research · doi:10.4103/2277-9175.175911 · Cited by 26
Finite Element Analysis of Electrospun Nanofibrous Mats under Biaxial Tension
Yin, Y., & Xiong, J. (2018) · Nanomaterials · doi:10.3390/nano8050348 · Cited by 26
The Influence of Textile Structure Characteristics on the Performance of Artificial Blood Vessels
Liu, C., Dai, J., Wang, X., & Hu, X. (2023) · Polymers · doi:10.3390/polym15143003 · Cited by 26
Fu, S., Yang, L., Fan, J., Wen, Q., Lin, S., Wang, B., Chen, L., Meng, X., Chen, Y., & Wu, J. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.01.068 · Cited by 26
Optimization of mechanical and structural properties of PVA nanofibers
Doustgani, A. (2015) · Journal of Industrial Textiles · doi:10.1177/1528083715601511 · Cited by 25
Seol, Y., Kim, K.-H., Kang, Y. M., Kim, I. A., & Rhee, S. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31334 · Cited by 25
Cardwell, R. D., Kluge, J. A., Thayer, P. S., Guelcher, S. A., Dahlgren, L. A., Kaplan, D. L., & Goldstein, A. S. (2015) · Journal of Biomechanical Engineering · doi:10.1115/1.4030404 · Cited by 25
Finne‐Wistrand, A., Albertsson, A., Kwon, O. H., Kawazoe, N., Chen, G., Kang, I., Hasuda, H., Gong, J.-S., & Ito, Y. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200700328 · Cited by 24
Garcia, W. S., Meléndez, A., Ramos, I., & Pinto, N. J. (2014) · Polymer · doi:10.1016/j.polymer.2014.09.015 · Cited by 24
Review on polyphosphazenes-based materials for bone and skeleton tissue engineering
Khalid, Z., Ali, S., & Akram, M. A. (2017) · International Journal of Polymeric Materials · doi:10.1080/00914037.2017.1375495 · Cited by 24
A Tensile Constitutive Relationship and a Finite Element Model of Electrospun Nanofibrous Mats
Yin, Y., Pan, Z., & Xiong, J. (2018) · Nanomaterials · doi:10.3390/nano8010029 · Cited by 24
Yao, Q., Hu, Y., Yu, F., Zhang, W., & Fu, Y. (2018) · RSC Advances · doi:10.1039/c7ra13551c · Cited by 24
Seol, Y., Kim, K.-H., Kim, I. A., & Rhee, S. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32738 · Cited by 24
Composite thin film and electrospun biomaterials for urologic tissue reconstruction
Kundu, A. K., Gelman, J., & Tyson, D. R. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22912 · Cited by 24
Unconfined, melt edge electrospinning from multiple, spontaneous, self-organized polymer jets
Wang, Q., Curtis, C. K., Thoppey, N. M., Bochinski, J. R., Gorga, R. E., & Clarke, L. (2014) · Materials Research Express · doi:10.1088/2053-1591/1/4/045304 · Cited by 24
He, W., Ye, L., Coates, P., Caton-Rose, F., & Zhao, X. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123980 · Cited by 23
Zuidema, J. M., Desmond, G. P., Rivet, C. J., Kearns, K. R., Thompson, D. M., & Gilbert, R. J. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.046 · Cited by 23
Dual‐functional electrospun poly(2‐hydroxyethyl methacrylate)
Zhang, B., Lalani, R., Cheng, F., Liu, Q., & Liu, L. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33205 · Cited by 23
Luo, H., Gan, D., Gama, M., Tu, J., Yao, F., Zhang, Q., Ao, H., Yang, Z., Li, J., & Wan, Y. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110416 · Cited by 23
HONG, Y., Shang, T., Li, Y., Wang, L., Wang, C., Chen, X., & JING, X. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.09.024 · Cited by 23
Nanofibrous scaffolds for regenerative endodontics treatment
Huang, F., Cheng, L., Li, J., & Ren, B. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1078453 · Cited by 22
The Application of Sheet Technology in Cartilage Tissue Engineering
Ge, Y., Gong, Y., Xu, Z., Lu, Y., & Fu, W. E. (2015) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2015.0189 · Cited by 22
Ling, J., Liu, J., Shen, Z., & Hogen‐Esch, T. E. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24637 · Cited by 22
Rossi, A., Wistlich, L., Heffels, K., Walles, H., & Gröll, J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600224 · Cited by 22
Articular cartilage: New directions and barriers of scaffolds development – review
Urbanek, O., Kołbuk, D., & Wróbel, M. (2018) · International Journal of Polymeric Materials · doi:10.1080/00914037.2018.1452224 · Cited by 22
Islam, M., Bellah, M. M., Sajid, A., Hasan, M. R., Kim, Y. T., & Iqbal, S. M. (2015) · Scientific Reports · doi:10.1038/srep13031 · Cited by 21
Sauter, T., Kratz, K. L., Heuchel, M., & Lendlein, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109546 · Cited by 21
Baiguera, S., Gaudio, C. D., Fioravanzo, L., Bianco, A., Grigioni, M., & Folin, M. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3944-5 · Cited by 21
Samberg, M. E., Mente, P. L., He, T., King, M. W., & Monteiro-Riviere, N. A. (2013) · Annals of Biomedical Engineering · doi:10.1007/s10439-013-0929-9 · Cited by 21
A novel porous scaffold fabrication technique for epithelial and endothelial tissue engineering
McHugh, K. J., Tao, S. L., & Saint‐Geniez, M. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-4934-1 · Cited by 21
Diameter control of electrospun chitosan‐collagen fibers
Chen, Z., Wei, B., Mo, X., & Cui, F. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21793 · Cited by 21
Kim, J. H., Kataoka, M., Jung, Y. C., Ko, Y., Fujisawa, K., Hayashi, T., Kim, Y. A., & Endo, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400715u · Cited by 21
Jordahl, J. H., Ramcharan, S., Gregory, J. V., & Lahann, J. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600437 · Cited by 21
Biologic Foundations for Skeletal Tissue Engineering
Bueno, E. M., & Glowacki, J. (2011) · Synthesis lectures on tissue engineering · doi:10.1007/978-3-031-02583-9 · Cited by 21
Nanotechnology and Tissue Engineering: The Scaffold Based Approach
Nair, L. S., Bhattacharyya, S., & Laurencin, C. T. (2003) · Nanotechnologies for the Life Sciences · doi:10.1002/9783527610419.ntls0095 · Cited by 21
Jin, S. F., Pu, Y., Guo, Z., Zhu, W., Li, S., Zhou, X. Y., Gao, W., & He, B. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00454a · Cited by 21
Innovative Strategies for Tissue Engineering
Carvalho, J. L., de Carvalho, P. H., Assis, D., & Goes, A. M. (2013) · InTech eBooks · doi:10.5772/53337 · Cited by 20
Kim, B., Park, K. E., Park, W. H., & Lee, J. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/4/045006 · Cited by 20
Poly(lactic acid)/poly(3‐hexylthiophene) composite nanofiber fabrication for electronic applications
Garcia, W. S., Meléndez, A., Ramos, I., & Pinto, N. J. (2016) · Polymer International · doi:10.1002/pi.5081 · Cited by 20
Continuous enzymatic synthesis of polycaprolactone in packed bed reactor using pressurized fluids
Veneral, J. G., de Olíveira, D., Ferreira, S. R. S., & de Oliveira, J. V. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.09.037 · Cited by 20
Krynauw, H., Bruchmüller, L., Bezuidenhout, D., Zilla, P., & Franz, T. (2011) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31907 · Cited by 20
Manufacturing and Assessment of Electrospun PVP/TEOS Microfibres for Adsorptive Heat Transformers
Frontera, P., Kumita, M., Malara, A., Nishizawa, J., & Bonaccorsi, L. (2019) · Coatings · doi:10.3390/coatings9070443 · Cited by 20
Vaquette, C., Babak, V. G., Baros, F., Boulanouar, O., Dumas, D., Fievet, P., Кильдеева, Н. Р., Maincent, P., & Wang, X. (2008) · Mendeleev Communications · doi:10.1016/j.mencom.2008.01.015 · Cited by 20
Liu, H., Lv, F., Li, J., Cao, T., Wan, C., Zhang, W., Li, L., Zheng, G., & Shen, C. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42823 · Cited by 19
Hanaee‐Ahvaz, H., Soleimani, M., Mobasheri, H., Bakhshandeh, B., Shakhssalim, N., Soudi, S., Hafizi, M., Vasei, M., & Dodel, M. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4688-1 · Cited by 19
Khandaker, M., Riahinezhad, S., Jamadagni, H., Morris, T., Coles, A., & Vaughan, M. B. (2017) · Nanomaterials · doi:10.3390/nano7070175 · Cited by 19
Bazrafshan, Z., & Stylios, G. K. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.07.002 · Cited by 19
The multiscale stiffness of electrospun substrates and aspects of their mechanical biocompatibility
Zündel, M., Ehret, A. E., & Mazza, E. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.012 · Cited by 20
Prabakaran, K., Mohanty, S., & NAYAK, S. K. (2015) · New Journal of Chemistry · doi:10.1039/c5nj00795j · Cited by 19
Gholipour‐Kanani, A., Bahrami, S. H., Taftei, H. A., Rabbani, S., & Sotoudeh, M. (2010) · IET Nanobiotechnology · doi:10.1049/iet-nbt.2010.0004 · Cited by 19
Szymanski, J. M., & Feinberg, A. W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024104 · Cited by 18
Reshmi, C. R., Menon, T., Binoy, A., Mishra, N., Elyas, K. K., & Sujith, A. (2017) · International Journal of Polymeric Materials · doi:10.1080/00914037.2016.1252357 · Cited by 18
Polloni, A. E., Rebelatto, E. A., Veneral, J. G., de Olíveira, D., de Oliveira, J. V., de Araújo, P. H. H., & Sayer, C. (2017) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28486 · Cited by 19
Behr, J., Irvine, S. A., Thwin, C., Shah, A. H., Bae, K., Zussman, E., & Venkatraman, S. S. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.201900234 · Cited by 18
Kang, Y. G., Shin, J. W., Park, S. H., Kim, Y. M., Gu, S. R., Wu, Y., Ban, H. Y., & Shin, J.-W. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1952-8 · Cited by 18
A Fibronectin Peptide‐Coupled Biopolymer Nanofibrous Matrix to Speed Up Initial Cellular Events
Kim, J., Noh, K., Yu, H., Lee, H., Jang, J., & Kim, H. (2010) · Advanced Engineering Materials · doi:10.1002/adem.200980008 · Cited by 18
Microfibrous β-TCP/collagen scaffolds mimic woven bone in structure and composition
Zhang, S., Zhang, X., Cai, Q., Wang, B., Deng, X., & Yang, X. (2010) · Biomedical Materials · doi:10.1088/1748-6041/5/6/065005 · Cited by 18
Zhao, M. L., Sui, G., Deng, X., Lu, J., Ryu, S., & Yang, X. P. (2006) · Advanced materials research · doi:10.4028/www.scientific.net/amr.11-12.243 · Cited by 18
Webb, B. C. W., Glogauer, M., & Santerre, J. P. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23095256 · Cited by 17
Designing Three-Dimensional Materials at the Interface to Biology
Gentsch, R., & Börner, H. G. (2010) · Advances in polymer science · doi:10.1007/12_2010_80 · Cited by 17
A Facile Method for the Preparation of Monodisperse Beads with Uniform Pore Sizes for Cell Culture
Moon, S., Oh, M., Paik, D., Ryu, T., Park, K., Kim, S. E., Park, J., Kim, J. H., & Choi, S. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200711 · Cited by 17
Peng, P., Chen, Y., Gao, Y., Yu, J., & Guo, Z. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21787 · Cited by 17
Emerging trends of nanobiomaterials in hard tissue engineering
Khambete, H., Keservani, R. K., Kesharwani, R. K., Jain, N. P., & Jain, C. P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-42862-0.00003-1 · Cited by 17
Wan, Y., Cui, T., Zhang, Q., Yang, Z., Yao, F., & Luo, H. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800316 · Cited by 17
Ahmadi, Z., Ravandi, S. A. H., Haghighat, F., & Dabirian, F. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-9726-x · Cited by 17
Biodegradable polyphosphazene – hydroxyapatite composites for bone tissue engineering
Subash, A., Basanth, A., & Kandasubramanian, B. (2022) · International Journal of Polymeric Materials · doi:10.1080/00914037.2022.2082426 · Cited by 17
Draw ratio enhancement in nonisothermal melt spinning
Suman, B., & Kumar, S. (2009) · AIChE Journal · doi:10.1002/aic.11707 · Cited by 17
MWCNTs/carbon nano fibril composite papers for fuel cell and super capacitor applications
Ali, A. A., Eltabey, M. M., Abdelbary, B. M., & Zoalfakar, S. H. (2014) · Journal of Electrostatics · doi:10.1016/j.elstat.2014.10.012 · Cited by 16
Salim, S. A., Kamoun, E. A., Evans, S. D., Taha, T. H., El‐Fakharany, E. M., Elmazar, M. M., Abdel-Aziz, A. F., Abou‐Saleh, R. H., & Salaheldin, T. A. (2021) · RSC Advances · doi:10.1039/d1ra02575a · Cited by 16
Technological advances in ocular trabecular meshwork in vitro models for glaucoma research
Bikuna‐Izagirre, M., Aldazabal, J., Extramiana, L., Moreno‐Montañés, J., Carnero, E., & Paredes, J. (2022) · Biotechnology and Bioengineering · doi:10.1002/bit.28182 · Cited by 16
Pangesty, A. I., ARAHIRA, T., & Todo, M. (2017) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-017-5985-5 · Cited by 16
Impact of Additives on Mechanical Properties of Supramolecular Electrospun Scaffolds
Ippel, B. D., van Haaften, E. E., Bouten, C. V. C., & Dankers, P. Y. W. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00658 · Cited by 16
Obata, A., Ito, S., Iwanaga, N., Mizuno, T., Jones, J. R., & Kasuga, T. (2014) · RSC Advances · doi:10.1039/c4ra08777a · Cited by 16
Aligned and random nanofibrous nanocomposite scaffolds for bone tissue engineering
Doustgani, A., Vasheghani‐Farahani, E., & Soleimani, M. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 16
Bioprinting Complex 3D Tissue and Organs
Kengla, C., Kidiyoor, A., & Murphy, S. V. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-801734-0.00068-0 · Cited by 16
Pangesty, A. I., & Todo, M. (2021) · Journal of Functional Biomaterials · doi:10.3390/jfb12030047 · Cited by 15
Borg, E., Frenot, A., Walkenström, P., Gisselfält, K., Gretzer, C., & Gatenholm, P. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27328 · Cited by 15
Khandaker, M., Riahinezhad, S., Sultana, F., Morris, T., Wolf, R. F., & Vaughan, M. B. (2017) · Journal of Medical and Biological Engineering · doi:10.1007/s40846-017-0312-7 · Cited by 15
Nanotechnology and 3D Bioprinting for Neural Tissue Regeneration
Zhu, W., Castro, N. J., & Zhang, L. G. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800547-7.00014-x · Cited by 15
Microfluidics-derived microfibers in flexible bioelectronics
Yang, C., Hou, X., & Zhang, L. (2024) · Materials Futures · doi:10.1088/2752-5724/ad667b · Cited by 14
Henn, D., Chen, K., Fischer, K. S., Rauh, A., Barrera, J. A., Kim, Y.-J., Martin, R. A., Hannig, M., Niedoba, P., Reddy, S., et al. (2019) · Advances in Wound Care · doi:10.1089/wound.2019.0975 · Cited by 14
PCL micro-dumbbells – A new class of polymeric particles reveals morphological biofunctionality
Sonnleitner, D., Schaefer, N., Wieland, A., Fischer, L., Pasberg, P., Thievessen, I., & Lang, G. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101097 · Cited by 14
Fracture toughness of titanium–cement interfaces: effects of fibers and loading angles
Khandaker, M., Utsaha, & Morris, T. (2014) · International Journal of Nanomedicine · doi:10.2147/ijn.s59253 · Cited by 14
Metadata
- Authors
- Keun Kwon, I., Kidoaki, S., & Matsuda, T.
- Affiliations
- Kyushu University (JP)
- Corresponding author
- Matsuda, Takehisa
- ORCID
- Kidoaki, Satoru
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2005-06
- Volume
- 26
- Issue
- 18
- Pages
- 3929-3939
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W1974798445
- Cited by
- 607
- References
- 28
- Citations by year
- 2026: 4 · 2025: 12 · 2024: 12 · 2023: 11 · 2022: 24 · 2021: 16 · 2020: 24 · 2019: 17 · 2018: 30 · 2017: 33 · 2016: 41 · 2015: 32 · 2014: 37 · 2013: 38 · 2012: 47
- FWCI
- 11.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education, Culture, Sports, Science and Technology
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- nanofibers, biodegradable copolyesters, poly(L-lactide-co-ε-caprolactone), poly(L-lactic acid), polycaprolactone, fiber diameter, porosity, mechanical properties, cell adhesion, human umbilical vein endothelial cells, endothelial cell proliferation, cell spreading, biomedical applications
- MeSH terms
- Biocompatible Materials, Cell Adhesion, Cells, Cultured, Elasticity, Electrochemistry, Humans, Materials Testing, Particle Size, Polyesters, Tensile Strength, Textiles, Porosity, Cell Culture Techniques, Absorbable Implants, Tissue Engineering, Endothelial Cells, Nanotubes, Cell Proliferation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review