The DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Electrospun nano- to microfiber fabrics made of biodegradable copolyesters: structural characteristics, mechanical properties and cell adhesion potential
Abstract
Nano- to micro-structured biodegradable poly(L-lactide-co-epsilon-caprolactone) (PLCL) fabrics were prepared by electrospinning. Electrospun microfiber fabrics with different compositions of PLCL (mol% in feed; 70/30, 50/50, and 30/70), poly(L-lactide) (PLL) and poly(epsilon-caprolactone) (PCL) were obtained using methylene chloride (MC) as a solvent. The PLL microfiber exhibited a nanoscale-pore structure with a pore diameter of approximately 200-800 nm at the surface and subsurface regions, whereas such a surface structure was hardly observed in other polymers containing CL. The microfiber fabric made of PLCL 50/50 was elastomeric. Nanoscale-fiber fabrics with PLCL 50/50 (approx. 0.3 or 1.2 microm in diameter) were electrospun using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a solvent. Mercury porosimetry showed that the decrease in the fiber diameter of the fabric decreased porosity, but increased fiber density and mechanical strength. Human umbilical vein endothelial cells (HUVECs) were adhered well and proliferated on the small-diameter-fiber fabrics (0.3 and 1.2 microm in diameter), both of which are dense fabrics, whereas markedly reduced cell adhesion, restricted cell spreading and no signs of proliferation were observed on the large-diameter-fiber fabric (7.0 microm in diameter). The potential biomedical application of electrospun PLCL 50/50 was discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In addition to its inherent properties, PLCL’s adaptability through surface modification, blending with bioactive molecules, and processing through advanced manufacturing techniques such as electrospinning, 3D printing, and supercritical carbon dioxide (scCO₂) foaming has extended its use to multiple fields [11–13].”
From Application of PLCL as a biodegradable polymer in biomedical engineering (2026) · cites this paper as [11]
Citations
Cites
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,572
Nanoengineering of Particle Surfaces
Caruso, F. (2001) · Advanced Materials · doi:10.1002/1521-4095(200101)13:1 · Cited by 2,484
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,429
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,253
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
Yoshimoto, H., Shin, Y.-S., Terai, H., & Vacanti, J. P. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00635-x · Cited by 1,975
Note on a Method of Determining the Distribution of Pore Sizes in a Porous Material
Washburn, E. W. (1921) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.7.4.115 · Cited by 1,914
COLLAGEN SUBSTRATA FOR STUDIES ON CELL BEHAVIOR
Elsdale, T., & Bard, J. (1972) · The Journal of Cell Biology · doi:10.1083/jcb.54.3.626 · Cited by 1,527
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y.-S., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,069
Mo, X., Xu, C. Y., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.042 · Cited by 803
Biodegradable Polymer Scaffolds with Well-Defined Interconnected Spherical Pore Network
Ma, P. X., & Choi, J. (2001) · Tissue Engineering · doi:10.1089/107632701300003269 · Cited by 621
Cited by
Sorted by citations
Items 401–500 of 607
Sustained releasing sponge-like 3D scaffolds for bone tissue engineering applications
Chamundeswari, V. N., Lui, Y. S., Chuah, Y. J., Tan, J. S., Wang, D., & Loo, S. C. J. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa8bcd · Cited by 14
Tran, T. T., Hamid, Z. A. A., Lai, N. T., Cheong, K. Y., & Todo, M. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-04159-3 · Cited by 13
Targeted morphology of copper oxide based electrospun nanofibers
Alshafei, F. H., & Simonetti, D. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115547 · Cited by 13
Zhang, Y., Tang, J., Fang, W. M., Zhao, Q. F., Lei, X., Zhang, J., Chen, J., Li, Y., & Zuo, Y. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14040185 · Cited by 13
Liao, G., Jiang, K., Jiang, S., & Xia, H. (2010) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2010.511534 · Cited by 13
Gorji, M., Ghasemi, N., Setayeshmehr, M., Zargar, A., Kazemi, M., Soleimani, M., & Hashemibeni, B. (2020) · Advanced Biomedical Research · doi:10.4103/abr.abr_143_19 · Cited by 13
Luo, C., Wightman, R., Meyerowitz, E. M., & Smoukov, S. K. (2015) · BMC Plant Biology · doi:10.1186/s12870-015-0581-7 · Cited by 13
Khandaker, M., Riahinezhad, S., Williams, W. R., & Wolf, R. F. (2017) · Nanomaterials · doi:10.3390/nano7060145 · Cited by 12
Monrreal-Rodríguez, A. K., Garibay-Alvarado, J. A., Vargas-Requena, C., & López, S. Y. R. (2020) · Results in Materials · doi:10.1016/j.rinma.2020.100091 · Cited by 12
Cell-Biomaterial constructs for wound healing and skin regeneration
Safina, I., Childress, L., Myneni, S. R., Vang, K. B., & Biris, A. S. (2022) · Drug Metabolism Reviews · doi:10.1080/03602532.2021.2025387 · Cited by 14
Han, D., Lee, J.-J., Jung, D.-Y., Park, J., & Hyon, S. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/4/044104 · Cited by 12
The influence of physical and spatial substrate characteristics on endothelial cells
Björgvinsdóttir, O., Ferguson, S. J., Snorradottir, B. S., Guðjónsson, Þ., & Wuertz‐Kozak, K. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101060 · Cited by 11
Synthesis of Spinnable Poly(ethylene terephthalate-co-glycolate) with Enhanced Degradability
Wang, S., Li, J., Wang, Y., Xu, R., Ouyang, J., Zhang, H., & Wang, W. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c00887 · Cited by 11
Recent advances in scaffold based electrospun for breast cancer research
Ebrahimbaygi, P., Khazaei, M. R., Valadbeigi, P., Rostaminasab, G., Mikaeili, A., Jouybari, T. A., & Rezakhani, L. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6499 · Cited by 11
Columbus, S., Painuly, D., Nair, R. P., & Krishnan, V. K. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110430 · Cited by 11
Nanotechnology and 3D/4D Bioprinting for Neural Tissue Regeneration
Zhu, W., Castro, N. J., Shen, Y.-L., & Zhang, L. G. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824552-1.00005-0 · Cited by 11
Topographical pattern for neuronal tissue engineering
Patel, M., Ahn, S., & Koh, W. (2022) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2022.07.006 · Cited by 11
Optimizing the electrospinning parameters in polyvinyl chloride nanofiber fabrication using CCD
Jafari, M. J., Pirposhteh, E. A., Farhangian, M., Ardakani, S. K., Tavakol, E., Dehghan, S. F., & Khalilinejad, A. (2022) · Research Journal of Textile and Apparel · doi:10.1108/rjta-09-2021-0119 · Cited by 11
Hasan, M. M., Alam, A., & Nayem, K. A. (2014) · European Scientific Journal ESJ · Cited by 11
Self-driven perfusion culture system using a paper-based double-layered scaffold
Ai, O., Arisaka, Y., & Takeda, N. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035010 · Cited by 11
Dehghan, S. F., Golbabaei, F., Mousavi, T. S., Mohammadi, H., Kohneshahri, M. H., & Bakhtiari, R. (2020) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.22059/poll.2019.278394.604 · Cited by 11
Biswas, S., Vasudevan, A., Yadav, N., Yadav, S., Rawal, P., Kaur, I., Tripathi, D. M., Kaur, S., & Chauhan, V. S. (2022) · ACS Applied Bio Materials · doi:10.1021/acsabm.2c00526 · Cited by 11
Araujo, S., Delpouve, N., Delbreilh, L., Papkov, D., Dzenis, Y. A., & Dargent, É. (2019) · Polymer · doi:10.1016/j.polymer.2019.121638 · Cited by 10
Beringer, L. T., Kiechel, M. A., Komiya, Y., Donius, A. E., Habas, R., Wegst, U. G. K., & Schauer, C. L. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35438 · Cited by 10
Fiber reinforcement of a biomimetic bone cement
Panzavolta, S., Bracci, B., Focarete, M. L., Gualandi, C., & Bigi, A. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4618-2 · Cited by 10
Chen, F., Chen, H., Wang, H., Wang, S., Wang, J., Wang, X., & Zhong, Q. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.020 · Cited by 10
Controlled release of Berberine Chloride by electrospun core/shell PVP/PLCL fibrous membranes
Sun, B., Li, S., Zhang, H., Li, H., Zhao, C., Yuan, X., & Cui, Y. (2010) · International Journal of Materials and Product Technology · doi:10.1504/ijmpt.2010.031433 · Cited by 10
Samani, F., Kokabi, M., Soleimani, M., & Valojerdi, M. R. (2010) · Polymer International · doi:10.1002/pi.2804 · Cited by 10
Assessment of the Biocompatibility of the PLLA-PLCL Scaffold Obtained by Electrospinning
Oyama, H. T. T., Cortella, L. R. X., Rosa, I. N. S., Filho, L. E. R., Hui, W. S., Cestari, I. N., & Cestari, I. A. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.07.021 · Cited by 9
Shreevani, K., Narayana, B., Sarojini, B. K., Dayananda, B. S., Aroor, G., Rekha, P. D., Aziz, R. A., & Raghu, S. V. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.106677 · Cited by 9
Xiao, Y., Qu, Y., Hu, X., Zhao, J., Xu, S., Zheng, L. X., & Liang, X. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.140862 · Cited by 9
Nonwoven materials and technologies for medical applications
Song, X., Melro, L., Padrão, J., Ribeiro, A. I., Yu, L., & Zille, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-90479-7.00008-7 · Cited by 9
Characterization and preparation of bioinspired resorbable conduits for vascular reconstruction
Yang, S.-K., Shafiq, M., Kim, D., Park, C., Jung, Y., & Hyun, S. (2016) · Macromolecular Research · doi:10.1007/s13233-016-4042-4 · Cited by 9
Enhanced proliferation of PC12 neural cells on untreated, nanotextured glass coverslips
Islam, M., Atmaramani, R., Mukherjee, S., Ghosh, S., & Iqbal, S. M. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/41/415501 · Cited by 9
Controlling the architecture of nanofiber‐coated microfibers using electrospinning
Thorvaldsson, A., Engström, J., Gatenholm, P., & Walkenström, P. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32366 · Cited by 9
The Electrospinning Process and Mechanical Properties of Nanofiber Mats under Vacuum Conditions
Hur, S., & Kim, W. D. (2006) · Key engineering materials · doi:10.4028/www.scientific.net/kem.326-328.393 · Cited by 9
Biocompatibility of Elastomers
Chauvel‐Lebret, D., Auroy, P., & Bonnaure‐Mallet, M. (2013) · CRC Press eBooks · doi:10.1201/b13757-15 · Cited by 9
Osteoblast-Like Cell Behaviors on Non-Woven Silica Fabric
Hwang, M., Yoon, H., Lee, Y. K., Lim, B. S., & Rhee, S. H. (2006) · Key engineering materials · doi:10.4028/www.scientific.net/kem.309-311.469 · Cited by 9
5.12 Electrospinning and Polymer Nanofibers: Process Fundamentals
Bhattacharjee, P., & Rutledge, G. C. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100691-7.00165-8 · Cited by 12
Magnani, J. S., Montazami, R., & Hashemi, N. N. (2021) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-090420-101138 · Cited by 8
Rivoallan, N., Mueller, M., Baudequin, T., Vigneron, P., Hébraud, A., Jellali, R., Dermigny, Q., Goff, A. L., Schlatter, G., Glasmacher, B., et al. (2024) · The International Journal of Artificial Organs · doi:10.1177/03913988241268033 · Cited by 8
Aligned poly (glycolide‐lactide) fiber membranes with conducting polypyrrole
Guo, H., Qiao, T., Jiang, S., Li, T., Song, P., Zhang, B., & Song, X. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3912 · Cited by 8
Fibrous composite material for textile heart valve design: in vitro assessment
Amri, A., Laroche, G., Chakfé, N., & Heim, F. (2018) · Biomedizinische Technik/Biomedical Engineering · doi:10.1515/bmt-2017-0226 · Cited by 8
Atari, M., Mohammadalizadeh, Z., Kharazi, A. Z., & Javanmard, S. H. (2022) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2021.2022161 · Cited by 8
Heath, D. E., Kobe, C., Jones, D., Moldovan, N. I., & Cooper, S. L. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0655 · Cited by 8
Hou, M., Wu, Q., Dai, M., Xu, P., Gu, C., Jia, X. Y., Feng, J., & Mo, X. (2014) · Biomedical Materials · doi:10.1088/1748-6041/10/1/015005 · Cited by 8
Electrospun cellulose nitrate and polycaprolactone blended nanofibers
Nartker, S., Hassan, M., & Stogsdill, M. (2015) · Materials Research Express · doi:10.1088/2053-1591/2/3/035401 · Cited by 8
Structure and Mechanical Properties of Electrospun Nanofibers and Nanocomposites
Tan, E. M., Nai, M. H., & Lim, C. T. (2014) · CRC Press eBooks · doi:10.1201/b17444-12 · Cited by 8
Application of PLCL as a biodegradable polymer in biomedical engineering
Zhao, Y., & Liu, H. (2026) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-026-07016-3 · Cited by 7
Evaluation of the Morphology and Osteogenic Potential ofTitania‐Based Electrospun Nanofibers
Wang, X., Zhu, J., Yin, L., Liu, S., Zhang, X., Ao, Y., & Chen, H. (2012) · Journal of Nanomaterials · doi:10.1155/2012/959578 · Cited by 7
Hakamada, Y., Ohgushi, N., Fujimura-Kondo, N., & Matsuda, T. (2012) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050611x572057 · Cited by 7
Self-citationRuhela, A., Bhatt, A., Rath, S. N., & Sharma, C. S. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53368 · Cited by 7
Matsuda, T., & Kawahara, D. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31061 · Cited by 7
Self-citationMohamed, A., Fikry, N., Shalaby, T. I. A., Aloufy, A., & Mohamed, M. (2014) · International Journal of Chemical and Applied Biological Sciences · doi:10.4103/2348-0734.131800 · Cited by 7
Hemoptysis: diagnosis and treatment.
Dudha, M. H., Lehrman, S. G., Aronow, W. S., & Rosa, J. M. (2009) · PubMed · Cited by 7
Surface Modification by Nanobiomaterials for Vascular Tissue Engineering Applications
Hung, H., & Hsu, S. (2018) · Current Medicinal Chemistry · doi:10.2174/0929867325666180914104633 · Cited by 7
Fabrication of complex biomaterial scaffolds for soft tissue engineering by electrospinning
Goldstein, A. S., & Thayer, P. S. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-42865-1.00011-8 · Cited by 7
Designing Nanofibrous Scaffolds for Tissue Engineering
Arya, N., Sharma, P., & Katti, D. S. (2009) · Wiley eBooks · doi:10.1002/9780470891315.ch13 · Cited by 7
James, C. M. (2009) · doi:10.15368/theses.2009.145 · Cited by 7
Nanobiomaterials in periodontal tissue engineering
Razavi, M., Salahinejad, E., Fahmy, M. D., Nowman, A., Jazayeri, H. E., Shah, P., Vashaee, D., Tayebi, P., & Tayebi, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-42862-0.00011-0 · Cited by 6
Phase Separated Fibrous Structures: Mechanism Study and Applications
Jiang, Q., & Hasan, S. M. K. (2014) · ACS symposium series · doi:10.1021/bk-2014-1175.ch008 · Cited by 6
Functionalizable coaxial PLLA/PDLA nanofibers with stereocomplexes at the internal interface
Neffe, A. T., Zhang, Q., Hommes‐Schattmann, P. J., Wang, W., Xu, X., Ahmad, B., Williams, G. R., & Lendlein, A. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00260-z · Cited by 6
Bioactive Non-Woven Silica Fabric Made Through Electro-Spinning Method
Yoon, H., Lee, Y. K., Lim, B. S., & Rhee, S. H. (2006) · Key engineering materials · doi:10.4028/www.scientific.net/kem.309-311.465 · Cited by 6
Baji, A., & Mai, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100173-8.00003-x · Cited by 6
In situ photopolymerization of PEGDA‐protein hydrogels on nanotube surfaces
Smoak, E. M., Henricus, M. M., & Banerjee, I. A. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32551 · Cited by 6
Endothelial Cell–Matrix Interactions in Neovascularization
Francis, M. E., Uriel, S., & Brey, E. M. (2008) · Tissue Engineering · doi:10.1089/ten.2007.0115 · Cited by 6
Architectural and Surface Modification of Nanofibrous Scaffolds for Tissue Engineering
Pettikiriarachchi, J. T. S., Parish, C. L., Nisbet, D. R., & Forsythe, J. S. (2011) · Nanotechnologies for the Life Sciences · doi:10.1002/9783527610419.ntls0258 · Cited by 6
Tissue Engineering: Biomaterial Application
Zohuri, G., Sandaroos, R., Ahmadjo, S., Damavandi, S., Rabiee, A., & Shamekhi, M. A. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120049953 · Cited by 6
PCL/collagen micro/nanofiber–nanonets loaded with Malva extract for infected wound healing
Nobakht, A., Natouri, O., & Barzegar, A. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.107854 · Cited by 5
Yoon, J. P., Kim, H., Park, S.-J., Kim, D.-H., Kim, J.-Y., Kim, D. H., & Chung, S. W. (2024) · Biomedicines · doi:10.3390/biomedicines12071613 · Cited by 5
Huang, C. C., Lou, C. W., Lu, C. T., Huang, S. H., Chao, C. Y., & Lin, J. H. (2010) · Advanced materials research · doi:10.4028/www.scientific.net/amr.123-125.975 · Cited by 5
Electrospun Polymer Scaffolds: Their Biomedical and Mechanical Properties
Liao, G., Zhou, X., Xie, X., & Mai, Y. (2016) · Springer series in biomaterials science and engineering · doi:10.1007/978-3-662-53574-5_8 · Cited by 5
Doustgani, A., & Ahmadi, E. (2016) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892501601100304 · Cited by 5
Fuller, K., Gaspar, D., Delgado, L. M., Shoseyov, O., & Zeugolis, D. I. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab2ef0 · Cited by 5
Graphene Hybrid Materials for Controlling Cellular Microenvironments
Kim, C., & Kim, T. P. (2020) · Materials · doi:10.3390/ma13184008 · Cited by 5
Evolvement of spinneret in electrospinning toward large-scale production of nanofibers
Jahan, I., & Wang, X. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819611-3.00023-6 · Cited by 5
Experimental Investigations on Electrospun Mat Production: For Use in High-Performance Air Filters
Dehghan, S. F., Golbabaei, F., Maddah, B., Yarahmadi, R., & Zadeh, A. S. (2015) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 5
Guillem‐Marti, J., Boix‐Lemonche, G., Gugutkov, D., Ginebra, M., Altankov, G., & Manero, J. M. (2018) · Nanomedicine · doi:10.2217/nnm-2017-0342 · Cited by 5
Polymers in Tissue Engineering
Heise, R. L., Blakeney, B. A., & Pouliot, R. A. (2014) · Springer eBooks · doi:10.1007/978-3-319-12478-0_7 · Cited by 5
CYTO-COMPATIBILITY OF POLYETHERSULPHONE NANOFIBRES PREPARED BY GAS-JET/ELECTROSPINNING
Wei, N., Wang, M., Lin, Y., Gong, P., Yao, Y. Y., Li, X., D.Ch., W., & Man, Y. (2008) · Cited by 5
Uchida, T., Oura, H., Ikeda, S., Arai, F., Negoro, M., & Fukuda, T. (2008) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.2008.4543242 · Cited by 5
Electrospun Polymeric Nanofiber Scaffolds for Tissue Regeneration
Nukavarapu, S. P., Kumbar, S. G., Merrell, J. G., & Laurencin, C. T. (2014) · CRC Press eBooks · doi:10.1201/b17444-11 · Cited by 5
Fabrication of Highly Aligned Poly(Vinyl Alcohol) Nanofibers and its Yarn by Electrospinning
Yeum, J. H., Yang, S. B., & Yeasmin, S. (2016) · InTech eBooks · doi:10.5772/65940 · Cited by 5
Annabi, N. (2012) · Wiley eBooks · doi:10.1002/9781118482513.ch2 · Cited by 5
Amoxicillin-loaded polycaprolactone-gelatin nanofiber/net (NFN) matrices for pneumothorax treatment
Mülazımoğlu, G., Çayır, Ü., Çakır, D., & Gümüşderelı́oğlu, M. (2025) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2025.125525 · Cited by 4
Multifunctional electrospinning periosteum: Development status and prospect
Zhu, J., Li, M., Yang, S., Zou, Y., & Lv, Y. (2025) · Journal of Biomaterials Applications · doi:10.1177/08853282251315186 · Cited by 4
Nanotechnology-based regenerative approaches
Roy, S., Das, A., Chakraborty, T., & Bhattacharya, B. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95134-0.00005-5 · Cited by 4
Electrospun elastin and collagen nanofibers and their application as biomaterials
Sallach, R. E., & Chaikof, E. L. (2008) · Elsevier eBooks · doi:10.1533/9781845694814.3.315 · Cited by 4
Electrospun nanofabric based all-fabric iontronic pressure sensor
Li, R., Si, Y., Zhu, Z., Guo, Y., Zhang, Y., Pan, N., Sun, G. Z., & Pan, T. (2017) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2017.7994517 · Cited by 4
Rashidi, N. S., Sukmana, I., Mataram, A., Jasmawati, N., Rofi, M. R. M., & Kadir, M. R. A. (2018) · Facta Universitatis Series Mechanical Engineering · doi:10.22190/fume170913031r · Cited by 4
"Development of Multi-Layer Scaffolds Based on Artificial Configuration"
Oura, H., Uchida, T., Ikeda, S., Nakano, T., Arai, F., Negoro, M., Matsuda, T., & Fukuda, T. (2007) · International Symposium on Micro-NanoMechatronics and Human Science · doi:10.1109/mhs.2007.4420845 · Cited by 4
Self-citationDesign and Fabrication Principles of Electrospinning of Scaffolds
Ekaputra, A. K., & Hutmacher, D. W. (2008) · CRC Press eBooks · doi:10.1201/9780849379741.ch5 · Cited by 4
Porous Materials for Biological Applications
Park, G. E., & Webster, T. J. (2006) · Encyclopedia of Medical Devices and Instrumentation · doi:10.1002/0471732877.emd209 · Cited by 4
Bone Tissue Engineering in Two Preclinical Ovine Animal Models
Henkel, J. (2017) · Queensland University of Technology · doi:10.5204/thesis.eprints.109909 · Cited by 4
Li, Y., Ge, Q., & Ma, L. (2023) · Journal of Bioactive and Compatible Polymers · doi:10.1177/08839115231216999 · Cited by 3
Hasan, S. M. K., Sen, P., Anik, H. R., Islam, M. R., Roy, M., Ahmed, T., & Haque, A. N. M. A. (2025) · Journal of Biomaterials Applications · doi:10.1177/08853282251380622 · Cited by 3
Innovative bioseparation technologies employing thermoresponsive polymer interfaces
Nagase, K. (2025) · Polymer Journal · doi:10.1038/s41428-025-01117-6 · Cited by 3
Design and fabrication of fiber mesh actuators
Sauter, T., Kratz, K. L., Farhan, M., Heuchel, M., & Lendlein, A. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101562 · Cited by 3
Tâm, T. T. M., Todo, M., Cheong, K. Y., & Hamid, Z. A. A. (2020) · AIP conference proceedings · doi:10.1063/5.0017437 · Cited by 3
Cytotoxicity and Cell Adhesion of PLLA/keratin Composite Fibrous Membranes
Li, L., Li, Y., Li, J., Mak, A. F. T., Ko, F., & Qin, L. (2009) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-540-92841-6_369 · Cited by 3
Metadata
- Authors
- Keun Kwon, I., Kidoaki, S., & Matsuda, T.
- Affiliations
- Kyushu University (JP)
- Corresponding author
- Matsuda, Takehisa
- ORCID
- Kidoaki, Satoru
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2005-06
- Volume
- 26
- Issue
- 18
- Pages
- 3929-3939
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W1974798445
- Cited by
- 607
- References
- 28
- Citations by year
- 2026: 4 · 2025: 12 · 2024: 12 · 2023: 11 · 2022: 24 · 2021: 16 · 2020: 24 · 2019: 17 · 2018: 30 · 2017: 33 · 2016: 41 · 2015: 32 · 2014: 37 · 2013: 38 · 2012: 47
- FWCI
- 11.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education, Culture, Sports, Science and Technology
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- nanofibers, biodegradable copolyesters, poly(L-lactide-co-ε-caprolactone), poly(L-lactic acid), polycaprolactone, fiber diameter, porosity, mechanical properties, cell adhesion, human umbilical vein endothelial cells, endothelial cell proliferation, cell spreading, biomedical applications
- MeSH terms
- Biocompatible Materials, Cell Adhesion, Cells, Cultured, Elasticity, Electrochemistry, Humans, Materials Testing, Particle Size, Polyesters, Tensile Strength, Textiles, Porosity, Cell Culture Techniques, Absorbable Implants, Tissue Engineering, Endothelial Cells, Nanotubes, Cell Proliferation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review