The DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
Electrospun nano- to microfiber fabrics made of biodegradable copolyesters: structural characteristics, mechanical properties and cell adhesion potential
Abstract
Nano- to micro-structured biodegradable poly(L-lactide-co-epsilon-caprolactone) (PLCL) fabrics were prepared by electrospinning. Electrospun microfiber fabrics with different compositions of PLCL (mol% in feed; 70/30, 50/50, and 30/70), poly(L-lactide) (PLL) and poly(epsilon-caprolactone) (PCL) were obtained using methylene chloride (MC) as a solvent. The PLL microfiber exhibited a nanoscale-pore structure with a pore diameter of approximately 200-800 nm at the surface and subsurface regions, whereas such a surface structure was hardly observed in other polymers containing CL. The microfiber fabric made of PLCL 50/50 was elastomeric. Nanoscale-fiber fabrics with PLCL 50/50 (approx. 0.3 or 1.2 microm in diameter) were electrospun using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a solvent. Mercury porosimetry showed that the decrease in the fiber diameter of the fabric decreased porosity, but increased fiber density and mechanical strength. Human umbilical vein endothelial cells (HUVECs) were adhered well and proliferated on the small-diameter-fiber fabrics (0.3 and 1.2 microm in diameter), both of which are dense fabrics, whereas markedly reduced cell adhesion, restricted cell spreading and no signs of proliferation were observed on the large-diameter-fiber fabric (7.0 microm in diameter). The potential biomedical application of electrospun PLCL 50/50 was discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In addition to its inherent properties, PLCL’s adaptability through surface modification, blending with bioactive molecules, and processing through advanced manufacturing techniques such as electrospinning, 3D printing, and supercritical carbon dioxide (scCO₂) foaming has extended its use to multiple fields [11–13].”
From Application of PLCL as a biodegradable polymer in biomedical engineering (2026) · cites this paper as [11]
Citations
Cites
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,572
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,429
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,253
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
Yoshimoto, H., Shin, Y.-S., Terai, H., & Vacanti, J. P. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00635-x · Cited by 1,975
Note on a Method of Determining the Distribution of Pore Sizes in a Porous Material
Washburn, E. W. (1921) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.7.4.115 · Cited by 1,914
COLLAGEN SUBSTRATA FOR STUDIES ON CELL BEHAVIOR
Elsdale, T., & Bard, J. (1972) · The Journal of Cell Biology · doi:10.1083/jcb.54.3.626 · Cited by 1,527
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y.-S., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,069
Mo, X., Xu, C. Y., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.042 · Cited by 803
Biodegradable Polymer Scaffolds with Well-Defined Interconnected Spherical Pore Network
Ma, P. X., & Choi, J. (2001) · Tissue Engineering · doi:10.1089/107632701300003269 · Cited by 621
Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation
Mikos, A. G., Bao, Y., Griffith, L. G., Ingber, D. E., Vacanti, J. P., & Langer, R. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270207 · Cited by 606
Flagged first, then by citations
1 of the 28 references couldn’t be matched to a known paper.
Cited by
Sorted by citations
Items 201–300 of 607
Li, H., Wong, Y. S., Wen, F., Ng, K. W., Ng, G. K. L., Venkatraman, S. S., Boey, F. Y. C., & Tan, L. P. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200318 · Cited by 60
Koushki, P., Bahrami, S. H., & Ranjbar‐Mohammadi, M. (2016) · Journal of Industrial Textiles · doi:10.1177/1528083716674906 · Cited by 56
Fabrication of a new tubular fibrous PLCL scaffold for vascular tissue engineering
Kim, S.-H., Kwon, J. H., Chung, M. S., Chung, E., Jung, Y., Kim, S. H., & Kim, Y. H. (2006) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856206778937244 · Cited by 55
Kim, J. H., Choung, P., Kim, I. Y., Lim, K., Son, H. M., Choung, Y., Cho, C., & Chung, J. H. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.01.023 · Cited by 54
Maleki, H., Gharehaghaji, A. A., Criscenti, G., Moroni, L., & Dijkstra, P. J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41388 · Cited by 53
Temperature-responsive chromatography for bioseparations: A review
Nagase, K., & Kanazawa, H. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.07.075 · Cited by 55
Haq, F., Venkatramani, A., KEITH, C. H., & Zhang, G. (2007) · International Journal of Nanomedicine · doi:10.2147/nano.2007.2.1.107 · Cited by 52
Electrospun silk fibroin/poly(lactide-co-ε-caprolactone) nanofibrous scaffolds for bone regeneration
Gu, P., Wang, Z., Xie, Q., Sun, H., Huang, Y., Zhang, Y., Bi, X., Zhang, D., Chen, J., Wang, J., et al. (2016) · International Journal of Nanomedicine · doi:10.2147/ijn.s97445 · Cited by 52
Enzymatic ring opening polymerization of ω-pentadecalactone using supercritical carbon dioxide
Polloni, A. E., Veneral, J. G., Rebelatto, E. A., de Olíveira, D., de Oliveira, J. V., de Araújo, P. H. H., & Sayer, C. (2016) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2016.09.019 · Cited by 53
Thermoresponsive polymer-modified microfibers for cell separations
Nagase, K., Sakurada, Y., Onizuka, S., Iwata, T., Yamato, M., Takeda, N., & Okano, T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.033 · Cited by 52
Morphology and thermal properties of PAN copolymer based electrospun nanofibers
Dhakate, S. R., Gupta, A., Chaudhari, A., Tawale, J. S., & Mathur, R. B. (2011) · Synthetic Metals · doi:10.1016/j.synthmet.2010.12.019 · Cited by 51
Nagase, K., Nagumo, Y., Kim, M., Kim, H., Kyung, H., Chung, H.-J., Sekine, H., Shimizu, T., Kanazawa, H., Okano, T., et al. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201700073 · Cited by 51
Nanofibres and their Influence on Cells for Tissue Regeneration
Wang, Y. K., Yong, T., & Ramakrishna, S. (2005) · Australian Journal of Chemistry · doi:10.1071/ch05222 · Cited by 51
Laurent, C. P., Vaquette, C., Liu, X., Schmitt, J.-F., & Rahouadj, R. (2018) · Journal of Biomaterials Applications · doi:10.1177/0885328218757064 · Cited by 49
Chen, L., Bai, Y., Liao, G., Peng, E., Wu, B., Wang, Y., Zeng, X., & Xie, X. (2013) · PLoS ONE · doi:10.1371/journal.pone.0071265 · Cited by 49
Lü, L., Wang, Y., Mao, X., Xiao, Z., & Huang, N. (2012) · Biomedical Materials · doi:10.1088/1748-6041/7/1/015002 · Cited by 49
Massoumi, B., Ghandomi, F., Abbasian, M., Eskandani, M., & Jaymand, M. (2016) · Applied Physics A · doi:10.1007/s00339-016-0538-1 · Cited by 49
Electrospinning Technology for Nanofibrous Scaffolds in Tissue Engineering
Li, W., Shanti, R. M., & Tuan, R. S. (2003) · Nanotechnologies for the Life Sciences · doi:10.1002/9783527610419.ntls0097 · Cited by 48
Mirhaj, M., Tavakoli, M., Varshosaz, J., Labbaf, S., Jafarpour, F., Ahmaditabar, P., Salehi, S., & Kazemi, N. (2021) · Biomaterials Advances · doi:10.1016/j.msec.2021.112541 · Cited by 47
Shalumon, K. T., Sathy, B. N., Deepthy, M., Jayakumar, R., Manzoor, K., & Nair, S. V. (2010) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2011.528288 · Cited by 47
Vakilian, S., Mashayekhan, S., Shabani, I., Khorashadizadeh, M., Fallah, A., & Soleimani, M. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.01.051 · Cited by 46
Li, L., Jiang, Z., Xu, J., & Fang, T. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40304 · Cited by 46
Microstructure‐property relationships in a tissue‐engineering scaffold
Johnson, J. K., Ghosh, A., & Lannutti, J. J. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25965 · Cited by 46
Mahmoodi, N. M., Mokhtari‐Shourijeh, Z., & Abdi, J. (2018) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.12933 · Cited by 46
Ji, H. M., Lee, H.-W., Karim, M. R., Cheong, I. W., Bae, E. A., Kim, T. H., Islam, M. S., Ji, B. C., & Yeum, J. H. (2009) · Colloid & Polymer Science · doi:10.1007/s00396-009-2019-y · Cited by 46
Ashammakhi, N. A., Halili, A. N., Yang, Y., Ylikauppila, H., Nikkola, L., & Hasırcı, V. (2007) · Journal of Craniofacial Surgery · doi:10.1097/01.scs.0000236444.05345.53 · Cited by 46
Molecular dynamics in electrospun amorphous plasticized polylactide fibers
Monnier, X., Delpouve, N., Basson, N., Guinault, A., Domenek, S., Saiter, A., Mallon, P. E., & Dargent, É. (2015) · Polymer · doi:10.1016/j.polymer.2015.07.047 · Cited by 47
Nishiguchi, A., Singh, S., Weßling, M., Kirkpatrick, C. J., & Möller, M. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01509 · Cited by 46
Dıkıcı, S., Dikici, B. A., Bhaloo, S. I., Balcells, M., Edelman, E. R., MacNeil, S., Reilly, G. C., Sherborne, C., & Claeyssens, F. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00451 · Cited by 47
Organic and Inorganic PCL-Based Electrospun Fibers
Leonés, A., Mújica-García, A., Arrieta, M. P., Salaris, V., López, D., Kenny, J. M., & Peponi, L. (2020) · Polymers · doi:10.3390/polym12061325 · Cited by 45
Electrospun polylactide/poly(ethylene glycol) hybrid fibrous scaffolds for tissue engineering
Wang, B., Fu, S., Ni, P., Peng, J., Zheng, L., Luo, F., Liu, H., & Qian, Z. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33264 · Cited by 44
Voorneveld, J. D., Oosthuysen, A., Franz, T., Zilla, P., & Bezuidenhout, D. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33695 · Cited by 47
Huang, L., Tan, J., Li, W., Zhou, L. M., Liu, Z., Luo, B., Lu, L., & Zhou, C. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.11.002 · Cited by 44
Walking through trabecular meshwork biology: Toward engineering design of outflow physiology
Dautriche, C. N., Xie, Y., & Sharfstein, S. T. (2014) · Biotechnology Advances · doi:10.1016/j.biotechadv.2014.04.012 · Cited by 43
He, X., Fu, W. E., Feng, B., Wang, H., Liu, Z., Yin, M., Wang, W., & Zheng, J. (2013) · Regenerative Medicine · doi:10.2217/rme.13.29 · Cited by 43
Dıkıcı, S., Claeyssens, F., & MacNeil, S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00191 · Cited by 44
Morad, H., Jahanshahi, M., Âkbari, J., Saeedi, M., Gill, P., & Enayatifard, R. (2021) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2021.124381 · Cited by 43
Gu, J., Liu, N., Yang, X., Feng, Z., & Qi, F. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/3/035012 · Cited by 43
Braghirolli, D. I., Steffens, D., Quintiliano, K., Acasigua, G. A. X., Gamba, D., Fleck, R. A., Petzhold, C. L., & Pranke, P. H. L. (2013) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33049 · Cited by 42
Zhang, K., Xiao, X., Wang, X., Fan, Y., & Li, X. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb01682a · Cited by 42
Zhang, J., & Mo, X. (2013) · Frontiers of Materials Science · doi:10.1007/s11706-013-0206-8 · Cited by 42
Humidity Controlled Mechanical Properties of Electrospun Polyvinylidene Fluoride (PVDF) Fibers
Szewczyk, P. K., Ura, D. P., & Stachewicz, U. (2020) · Fibers · doi:10.3390/fib8100065 · Cited by 42
Zhang, H., Fang, S., Wu, Z., Islam, S. R., & Qin, X. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c00781 · Cited by 41
Modular Approach toward Bioactive Fiber Meshes Carrying Oligosaccharides
Gentsch, R., Pippig, F., Nilles, K., Théato, P., Kikkeri, R. V., Maglinao, M., Lepenies, B., Seeberger, P. H., & Börner, H. G. (2010) · Macromolecules · doi:10.1021/ma101607a · Cited by 41
Laco, F., Grant, M. H., & Black, R. A. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34468 · Cited by 41
SIMPoly: A Matlab-Based Image Analysis Tool to Measure Electrospun Polymer Scaffold Fiber Diameter
Murphy, R., Turcott, A., Banuelos, L., Dowey, E., Goodwin, B., & Cardinal, K. O. (2020) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2020.0304 · Cited by 41
Tornello, P. R. C., Caracciolo, P. C., Cuadrado, T. R., & Abraham, G. A. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.04.065 · Cited by 40
Chung, S., Moghe, A. K., Montero, G. A., Kim, S. H., & King, M. W. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/1/015019 · Cited by 40
Three‐Layered PCL Grafts Promoted Vascular Regeneration in a Rabbit Carotid Artery Model
Wang, K., Zheng, W., Pan, Y., Shaoyang, M., Guan, Y., Liu, R., Zhu, M., Zhou, X., Zhang, J., Zhao, Q., et al. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201500355 · Cited by 40
Baudequin, T., Gaut, L., Mueller, M., Huepkes, A., Glasmacher, B., Duprez, D., Bédoui, F., & Legallais, C. (2017) · Materials · doi:10.3390/ma10121387 · Cited by 40
Advances in electrospinning: The production and application of nanofibres and nanofibrous structures
Mokhtari, F., Salehi, M., Zamani, F., Hajiani, F., Zeighami, F., & Latifi, M. (2016) · Textile Progress · doi:10.1080/00405167.2016.1201934 · Cited by 40
Polymeric Scaffold Aided Stem Cell Therapeutics for Cardiac Muscle Repair and Regeneration
Lakshmanan, R., Krishnan, U. M., & Sethuraman, S. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201300223 · Cited by 39
An analysis of the tensile properties of nanofiber mats
Wan, Y., Wang, H., Gao, W., & Ko, F. (2015) · Polymer · doi:10.1016/j.polymer.2015.07.018 · Cited by 39
Mechanical performance of aligned electrospun polyimide nanofiber belt at high temperature
Jiang, S., Duan, G., Chen, L., Hu, X., & Hou, H. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.11.003 · Cited by 38
Electrospun dextran fibrous membranes
Ritcharoen, W., Thaiying, Y., Saejeng, Y., Jangchud, I., Rangkupan, R., Meechaisue, C., & Supaphol, P. (2008) · Cellulose · doi:10.1007/s10570-008-9199-3 · Cited by 38
Manafi, P., Nazockdast, H., Karimi, M. B., Sadighi, M., & Magagnin, L. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228622 · Cited by 38
Fang, Z., Fu, W., Dong, Z., Zhang, X., Gao, B., Guo, D., He, H., & Wang, Y. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.12.011 · Cited by 38
3D printing of biocomposites for osteochondral tissue engineering
Vyas, C., Poologasundarampillai, G., Hoyland, J. A., & Bártolo, P. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100752-5.00013-5 · Cited by 38
Li, T., Tian, L., Liao, S., Ding, X. B., Irvine, S. A., & Ramakrishna, S. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.06.003 · Cited by 37
Mirhaj, M., Salehi, S., Tavakoli, M., Varshosaz, J., Labbaf, S., Abadi, S. A. M., & Haghighi, V. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213082 · Cited by 37
Chemical cross-linking of chitosan/polyvinyl alcohol electrospun nanofibers
Pouranvari, S., Ebrahimi, F., Javadi, G., & Maddah, B. (2016) · Materiali in tehnologije · doi:10.17222/mit.2015.083 · Cited by 36
Bioresorbable Polymers for Tissue Engineering
Santos, A. R. (2010) · InTech eBooks · doi:10.5772/8580 · Cited by 37
Carbon dioxide impregnation of electrospun polycaprolactone fibers
Ayodeji, O., Graham, E., Kniss, D. A., Lannutti, J. J., & Tomasko, D. L. (2006) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2006.09.011 · Cited by 36
Shu, D., Xi, P., Li, S., Li, C., Wang, X., & Cheng, B. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16655 · Cited by 35
Carbon origami: A method to fabricate lightweight carbon cellular materials
Islam, M., Flach, J. P., & Martínez‐Duarte, R. (2018) · Carbon · doi:10.1016/j.carbon.2018.03.033 · Cited by 35
Optimization of cell seeding on electrospun PCL-silk fibroin scaffolds
Singh, R., Eitler, D., Morelle, R., Friedrich, R. P., Dietel, B., Alexiou, C., Boccaccini, A. R., Liverani, L., & Cicha, I. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109838 · Cited by 35
Electrospun nanofiber nerve guidance conduits for peripheral nerve regeneration: A review
Lee, S., Patel, M., & Patel, R. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111663 · Cited by 35
Understanding wound inflammation.
Collier, M. A. (2003) · PubMed · Cited by 35
Tong, H.-W., Wang, M., & Lu, W. W. (2012) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/092050611x560708 · Cited by 34
Fabrication of Silk Fibroin/P(LLA‐CL) Aligned Nanofibrous Scaffolds for Nerve Tissue Engineering
Zhang, K., Wu, J., Huang, C., & Mo, X. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200038 · Cited by 34
Biomimetic implants for pelvic floor repair
Vashaghian, M., Zaat, S. A. J., Smit, T. H., & Roovers, J. (2017) · Neurourology and Urodynamics · doi:10.1002/nau.23367 · Cited by 34
Kwon, G.-W., Gupta, K. C., Jung, K.-H., & Kang, I.-K. (2017) · Biomaterials Research · doi:10.1186/s40824-017-0097-3 · Cited by 33
Electrospinning of functional materials for biomedicine and tissue engineering
Inozemtseva, O. A., Salkovskiy, Y., Severyukhina, A. N., Vidyasheva, I. V., Petrova, N. V., Metwally, H. A., Stetciura, I. Y., & Gorin, D. A. (2014) · Russian Chemical Reviews · doi:10.1070/rcr4435 · Cited by 33
Shahabadi, S. M. S., Kheradmand, A., Montazeri, V., & Ziaee, H. (2015) · Polymer Science Series A · doi:10.1134/s0965545x15020157 · Cited by 33
Decellularized matrix as a building block in bioprinting and electrospinning
Santschi, M. X. T., Vernengo, J., Eglin, D., D’Este, M., & Wuertz‐Kozak, K. (2019) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2019.05.003 · Cited by 33
Wan, Y., Yang, S., Peng, M., Gama, M., Yang, Z., Deng, X., Zhou, J., Ouyang, C., & Luo, H. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01002b · Cited by 33
Zhou, L., Liu, N., Feng, L., Zhao, M., Wu, P., Chai, Y., Liu, J., Zhu, P., & Guo, R. (2021) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10274 · Cited by 33
Fu, W., Xu, Y., Wang, Z., Li, G., Shi, J., Cui, F., Zhang, Y., & Zhang, X. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34134 · Cited by 33
Beachley, V. Z., Katsanevakis, E., Zhang, N., & Wen, X. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200125 · Cited by 33
de Oliveira, F. C. S., Olvera, D., Sawkins, M. J., Cryan, S., Kimmins, S. D., da Silva, T. E., Kelly, D. J., Duffy, G. P., Kearney, C. J., & Heise, A. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01335 · Cited by 33
Optimizing Anisotropic Polyurethane Scaffolds to Mechanically Match with Native Myocardium
Xu, C., Okpokwasili, C., Huang, Y., Shi, X., Wu, J., Liao, J., Tang, L., & Hong, Y. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01860 · Cited by 32
Li, S., Sun, B., Li, X., & Yuan, X. (2008) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856208783432499 · Cited by 32
Zhu, Y., Romain, C., Poirier, V., & Williams, C. K. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00225 · Cited by 35
Inukai, S., Kurokawa, N., & Hotta, A. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.07.028 · Cited by 32
Jiang, S., & Liao, G. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.698686 · Cited by 31
Liao, G., Chen, L., Zeng, X., Zhou, X., Xie, X., Peng, E., Ye, Z., & Mai, Y. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.33398 · Cited by 31
Design and characterization of PEGylated terpolymer biomaterials
Heath, D. E., & Cooper, S. L. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32811 · Cited by 31
Paneva, D., Bougard, F., Manolova, N. E., Dúbois, P., & Rashkov, I. B. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.01.010 · Cited by 31
Ma, G., Wang, Z., Chen, J., Yin, R., Chen, B., & Nie, J. (2013) · New Journal of Chemistry · doi:10.1039/c3nj00701d · Cited by 31
Multiscale Fibrous Scaffolds in Regenerative Medicine
Sowmya, S., Jayakumar, R., Chennazhi, K. P., Levorson, E. J., Mikos, A. G., & Nair, S. V. (2011) · Advances in polymer science · doi:10.1007/12_2011_163 · Cited by 31
Melt electrospinning process optimization of polylactic acid nanofibers
Doustgani, A., & Ahmadi, E. (2015) · Journal of Industrial Textiles · doi:10.1177/1528083715610297 · Cited by 31
Gang, E. H., Ki, C. S., Kim, J. W., Lee, J., Gyu, B., Lee, K. H., & Park, Y. H. (2012) · Fibers and Polymers · doi:10.1007/s12221-012-0685-8 · Cited by 30
Polímeros biorreabsorvíveis como substrato para cultura de células e engenharia tecidual
Santos, A. R., & Wada, M. L. F. (2007) · Polímeros · doi:10.1590/s0104-14282007000400010 · Cited by 30
Injectable hydrogel incorporating with nanoyarn for bone regeneration
Liu, W. X., Zhan, J., Su, Y., Wu, T. S., Ramakrishna, S., Liao, S., & Mo, X. (2013) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2013.848326 · Cited by 30
Micropatterned Fiber Scaffolds for Spatially Controlled Cell Adhesion
Mandal, S., Bhaskar, S., & Lahann, J. (2009) · Macromolecular Rapid Communications · doi:10.1002/marc.200900340 · Cited by 30
Electrospinning of Continuous Nanofiber Bundles and Twisted Nanofiber Yarns
Ali, U., Zhou, Y., Wang, X., & Li, T. (2011) · InTech eBooks · doi:10.5772/25059 · Cited by 30
Nanoengineered biocomposite tricomponent polymer based matrices for bone tissue engineering
Kijeńska‐Gawrońska, E., Zhang, S. M., Prabhakaran, M. P., Ramakrishna, S., & Święszkowski, W. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2016.1163561 · Cited by 30
Role of Cell Adhesion in Cancer Metastasis Formation: A Review
Burčík, D., Macko, J., Podrojková, N., Demeterová, J., Staňo, M., & Oriňák, A. (2025) · ACS Omega · doi:10.1021/acsomega.4c08140 · Cited by 29
Qi, X., Huang, Y., Han, D., Zhang, J., Cao, J., Jin, X., Huang, J., Li, X., & Wang, T. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/2/025005 · Cited by 29
Bioinspired hydrogel microfibres colour-encoded with colloidal crystals
Meng, Z., Zhang, J., Deng, X., Liu, J., Yu, Z., & Abell, C. (2019) · Materials Horizons · doi:10.1039/c9mh00528e · Cited by 29
Metadata
- Authors
- Keun Kwon, I., Kidoaki, S., & Matsuda, T.
- Affiliations
- Kyushu University (JP)
- Corresponding author
- Matsuda, Takehisa
- ORCID
- Kidoaki, Satoru
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2005-06
- Volume
- 26
- Issue
- 18
- Pages
- 3929-3939
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W1974798445
- Cited by
- 607
- References
- 28
- Citations by year
- 2026: 4 · 2025: 12 · 2024: 12 · 2023: 11 · 2022: 24 · 2021: 16 · 2020: 24 · 2019: 17 · 2018: 30 · 2017: 33 · 2016: 41 · 2015: 32 · 2014: 37 · 2013: 38 · 2012: 47
- FWCI
- 11.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education, Culture, Sports, Science and Technology
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- nanofibers, biodegradable copolyesters, poly(L-lactide-co-ε-caprolactone), poly(L-lactic acid), polycaprolactone, fiber diameter, porosity, mechanical properties, cell adhesion, human umbilical vein endothelial cells, endothelial cell proliferation, cell spreading, biomedical applications
- MeSH terms
- Biocompatible Materials, Cell Adhesion, Cells, Cultured, Elasticity, Electrochemistry, Humans, Materials Testing, Particle Size, Polyesters, Tensile Strength, Textiles, Porosity, Cell Culture Techniques, Absorbable Implants, Tissue Engineering, Endothelial Cells, Nanotubes, Cell Proliferation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
