Hydrothermal carbonization of Opuntia ficus-indica cladodes: Role of process parameters on hydrochar properties
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Opuntia ficus-indica cladodes are a potential source of solid biofuel from marginal, dry land. Experiments assessed the effects of temperature (180-250°C), reaction time (0.5-3h) and biomass to water ratio (B/W; 0.07-0.30) on chars produced via hydrothermal carbonization. Multivariate linear regression demonstrated that the three process parameters are critically important to hydrochar solid yield, while B/W drives energy yield. Heating value increased together with temperature and reaction time and was maximized at intermediate B/W (0.14-0.20). Microscopy shows evidence of secondary char formed at higher temperatures and B/W ratios. X-ray diffraction, thermogravimetric data, microscopy and inductively coupled plasma mass spectrometry suggest that calcium oxalate in the raw biomass remains in the hydrochar; at higher temperatures, the mineral decomposes into CO2 and may catalyze char/tar decomposition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Funke, A., & Ziegler, F. (2010) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.198 · Cited by 2,001
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu, Z., Quek, A., Kent Hoekman, S., & Balasubramanian, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.069 · Cited by 808
Hydrothermal carbonization: Fate of inorganics
Reza, M. T., Lynam, J. G., Uddin, M. H., & Coronella, C. J. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.004 · Cited by 492
Lucian, M., & Fiori, L. (2017) · Energies · doi:10.3390/en10020211 · Cited by 316
Self-citationSabio, E., Álvarez-Murillo, A., Román, S., & Ledesma, B. (2016) · Waste Management · doi:10.1016/j.wasman.2015.04.016 · Cited by 255
Volpe, M., & Fiori, L. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.02.022 · Cited by 237
Self-citationMäkelä, M., Benavente, V., & Fullana, A. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.06.022 · Cited by 225
Study of variables in energy densification of olive stone by hydrothermal carbonization
Álvarez-Murillo, A., Román, S., Ledesma, B., & Sabio, E. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.01.031 · Cited by 104
Corneli, E., Dragoni, F., Adessi, A., De Philippis, R., Bonari, E., & Ragaglini, G. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.03.134 · Cited by 55
Cited by
Lucian, M., Volpe, M., Gao, L., Piro, G., Goldfarb, J. L., & Fiori, L. (2018) · Fuel · doi:10.1016/j.fuel.2018.06.060 · Cited by 300
Self-citationHydrochars production, characterization and application for wastewater treatment: A review
Azzaz, A. A., Khiari, B., Jellali, S., Ghimbeu, C. M., & Jeguirim, M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109882 · Cited by 236
“In addition, pH solution and the hydrochar surface (pHzpc) control also the removal efficiency of charged pollutants [84,105].”
BackgroundIschia, G., & Fiori, L. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01255-3 · Cited by 234
Self-citationLucian, M., Volpe, M., Merzari, F., Wüst, D., Kruse, A., Andreottola, G., & Fiori, L. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123734 · Cited by 121
Self-citationMerzari, F., Langone, M., Andreottola, G., & Fiori, L. (2019) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2018.1561104 · Cited by 115
Self-citationHydrothermal Carbonization Kinetics of Lignocellulosic Agro-Wastes: Experimental Data and Modeling
Lucian, M., Volpe, M., & Fiori, L. (2019) · Energies · doi:10.3390/en12030516 · Cited by 98
Self-citationInfluences of feedstock type and process variables on hydrochar properties
Toptas Tag, A., Duman, G., & Yanik, J. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2017.11.058 · Cited by 97
Li, L., Wang, Y., Xu, J., Flora, J. R. V., Hoque, S., & Berge, N. D. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.04.066 · Cited by 57
In Deep Analysis on the Behavior of Grape Marc Constituents during Hydrothermal Carbonization
Basso, D., Weiss-Hortala, E., Patuzzi, F., Baratieri, M., & Fiori, L. (2018) · Energies · doi:10.3390/en11061379 · Cited by 45
Self-citationIschia, G., Orlandi, M., Fendrich, M. A., Bettonte, M., Merzari, F., Miotello, A., & Fiori, L. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.110067 · Cited by 44
Self-citationCO2 adsorption in hydrochar produced from waste biomass
Fagnani, H. M. C., da Silva, C. T. P., Pereira, M. M., Rinaldi, A. W., Arroyo, P. A., & de Barros, M. A. S. D. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1055-6 · Cited by 33
Enthalpy change during hydrothermal carbonization of biomass: A critical review
Pecchi, M., Patuzzi, F., Basso, D., & Baratieri, M. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-09117-4 · Cited by 27
Metadata
- Authors
- Volpe, M., Goldfarb, J. L., & Fiori, L.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 247
- Pages
- 310-318
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2755672925
- Cited by
- 182
- References
- 9
- FWCI
- 8.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.