The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Extraction and characterization of nanocellulose structures from raw cotton linter
Open accessAbstract
This study aimed to characterize nanocellulose extracted from cotton (Gossypium hirsutum) linters. The nanocellulose was subjected to electronic microscopy, thermal analysis, X-ray diffractometry, light scattering, and contact angle. The properties of the nanocellulose are considerably different from the linter. The acidic hydrolyses applied to extract the nanocrystals increased the crystallinity index and the hydrophilicity and decreased the thermal stability. On average, the nanocrystals were 177 nm long and 12 nm wide, with an aspect ratio of 19 when measured by microscopy. The light scattering results were coherent with the crystal dimensions. Cotton linter is a potential source of nanocellulose crystals, particularly to be used in the production of hydrophilic nanocomposites. Extraction of nanocellulose from raw cotton linter does not require pulping.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613
Infrared and Raman Characteristic Group Frequencies: Tables and Charts
Socrates, G. (2004) · Cited by 7,587
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Rosa, M. F., Medeiros, E. S., Malmonge, J. A., Gregorski, K. S., Wood, D. F., Mattoso, L. H. C., Glenn, G., Orts, W. J., & Imam, S. H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.01.059 · Cited by 1,099 · cited 4×
“Nanocrystals of cellulose, with diameters ranging from 2 nm o 20 nm and length ranging from 100 nm to 2.1 m are called hiskers, nanowhiskers, or nanofibrils, and they can be obtained rom many natural fibers (Capadona et al., 2009; Pandey, Ahn, Lee, ohanty, & Misra, 2010; Rosa et al., 2010).”
BackgroundInfluentialSelf-citationSiqueira, G., Bras, J., & Dufresne, A. (2009) · Biomacromolecules · doi:10.1021/bm801193d · Cited by 791
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Chen, W., Yu, H., Liu, Y., Hai, Y., Zhang, M., & Chen, P. (2011) · Cellulose · doi:10.1007/s10570-011-9497-z · Cited by 541
Sisal cellulose whiskers reinforced polyvinyl acetate nanocomposites
Garcia de Rodriguez, N. L., Thielemans, W., & Dufresne, A. (2006) · Cellulose · doi:10.1007/s10570-005-9039-7 · Cited by 534
New Nanocomposite Materials Reinforced with Flax Cellulose Nanocrystals in Waterborne Polyurethane
Cao, X., Dong, H., & Li, C. M. (2007) · Biomacromolecules · doi:10.1021/bm0610368 · Cited by 462
Cited by
Recent progress in cellulose nanocrystals: sources and production
Trache, D., Hussin, M. H., Haafiz, M. K. M., & Thakur, V. K. (2017) · Nanoscale · doi:10.1039/c6nr09494e · Cited by 1,064
Nanocellulose: Extraction and application
Phanthong, P., Reubroycharoen, P., Hao, X., Xu, G., Abudula, A., & Guan, G. (2018) · Carbon Resources Conversion · doi:10.1016/j.crcon.2018.05.004 · Cited by 1,028
Jonoobi, M., Oladi, R., Davoudpour, Y., Oksman, K., Dufresne, A., Hamzeh, Y., & Davoodi, R. (2015) · Cellulose · doi:10.1007/s10570-015-0551-0 · Cited by 847
Conversion of Lignocellulosic Biomass to Nanocellulose: Structure and Chemical Process
Lee, H. V., Hamid, S. B. A., & Zain, S. K. (2014) · The Scientific World Journal · doi:10.1155/2014/631013 · Cited by 700
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.045 · Cited by 568
Rajinipriya, M., Nagalakshmaiah, M., Robert, M., & Elkoun, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03437 · Cited by 505
Nurazzi, N. M., Asyraf, M. R. M., Fatimah Athiyah, S., Shazleen, S. S., Rafiqah, S. A., Harussani, M. M., Kamarudin, S. H., Razman, M. R., Rahmah, M., Zainudin, E. S., et al. (2021) · Polymers · doi:10.3390/polym13132170 · Cited by 462
Production routes to tailor the performance of cellulose nanocrystals
Vanderfleet, O. M., & Cranston, E. D. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00239-y · Cited by 456
El Miri, N., Abdelouahdi, K., Barakat, A., Zahouily, M., Fihri, A., Solhy, A., & El Achaby, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.04.051 · Cited by 406
Preparation, properties and applications of nanocellulosic materials
Mondal, S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.050 · Cited by 387
Chemical isolation and characterization of different cellulose nanofibers from cotton stalks
Soni, B., Hassan, E. B., & Mahmoud, B. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.08.031 · Cited by 380
Isolation and characterisation of cellulose nanocrystals from sago seed shells
Naduparambath, S., T.V., J., V., S., M.P., S., Balan, A. K., & E., P. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.088 · Cited by 373
Sofla, M. R. K., Brown, R. J., Tsuzuki, T., & Rainey, T. J. (2016) · Advances in Natural Sciences: Nanoscience and Nanotechnology · doi:10.1088/2043-6262/7/3/035004 · Cited by 368
Vasconcelos, N. F., Feitosa, J. P. A., da Gama, F. M. P., Morais, J. P. S., Andrade, F. K., de Souza Filho, M. D. S. M., & Rosa, M. D. F. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.08.090 · Cited by 361
Self-citationCharacterization of bionanocomposite films prepared with agar and paper-mulberry pulp nanocellulose
Reddy, J. P., & Rhim, J.-W. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.056 · Cited by 341
Industrial and crop wastes: A new source for nanocellulose biorefinery
García, A., Gandini, A., Labidi, J., Belgacem, N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.06.004 · Cited by 334
Recent trends and applications of cellulose nanocrystals in food industry
Mu, R., Hong, X., Ni, Y., Li, Y., Pang, J., Wang, Q., Xiao, J., & Zheng, Y. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.09.013 · Cited by 322
Hoo, D. Y., Low, Z. L., Low, D. Y. S., Tang, S. Y., Manickam, S., Tan, K. W., & Ban, Z. H. (2022) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2022.106176 · Cited by 309
Melikoğlu, A. Y., Bilek, S. E., & Cesur, S. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.03.103 · Cited by 298
Oun, A. A., & Rhim, J.-W. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.020 · Cited by 296
Emerging technologies for the production of nanocellulose from lignocellulosic biomass
Pradhan, D., Jaiswal, A. K., & Jaiswal, S. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119258 · Cited by 294
Oun, A. A., & Rhim, J.-W. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.073 · Cited by 294
Tang, Y., Yang, S., Zhang, N., & Zhang, J. (2014) · Cellulose · doi:10.1007/s10570-013-0158-2 · Cited by 289
Gopinath, V., Saravanan, S., Al-Maleki, A. R., Ramesh, M., & Vadivelu, J. (2018) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2018.07.136 · Cited by 280
Yu, S., Sun, J., Shi, Y., Wang, Q., Wu, J., & Liu, J. (2021) · Environmental Science and Ecotechnology · doi:10.1016/j.ese.2020.100077 · Cited by 269
Lani, N. S., Ngadi, N., Johari, A., & Jusoh, M. (2014) · Journal of Nanomaterials · doi:10.1155/2014/702538 · Cited by 261
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.124 · Cited by 257
Gaspar, D., Fernandes, S. N., de Oliveira, A. G., Fernandes, J. G., Grey, P., Pontes, R. V., Pereira, L., Martins, R., Godinho, M. H., & Fortunato, E. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/9/094008 · Cited by 254
Kusmono, Listyanda, R. F., Wildan, M. W., & Ilman, M. N. (2020) · Heliyon · doi:10.1016/j.heliyon.2020.e05486 · Cited by 231
Innovating Generation of Nanocellulose from Industrial Hemp by Dual Asymmetric Centrifugation
Agate, S., Tyagi, P., Naithani, V., Lucia, L., & Pal, L. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b05992 · Cited by 51
Effects of acid hydrolysis on the extraction of cellulose nanocrystals (CNCs): A review
Department of Chemistry, U. O. Z., MOHOMANE, S. M., MOTLOUNG, S. V., Department of Chemical and Physical Sciences, P. B. X., KOAO, L. F., Department of Physics, U. O. T. F. S. (. C., MOTAUNG, T. E., & Department of Chemistry, S. M. H. S. U. (2022) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2022.56.61 · Cited by 39
Metadata
- Authors
- Morais, J. P. S., Rosa, M. D. F., de Souza Filho, M. D. S. M., Nascimento, L. D., do Nascimento, D. M., & Cassales, A. R.
- Venue
- Carbohydrate Polymers
- Publisher
- Elsevier BV
- Published
- 2013-01
- Volume
- 91
- Issue
- 1
- Pages
- 229-235
- ISSN
- 0144-8617 (ISSN-L)
- OpenAlex
- W2078500536
- Cited by
- 564
- References
- 37
- FWCI
- 5.77
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.