Optimum alkaline treatment parameters for the extraction of cellulose and production of cellulose nanocrystals from apple pomace
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
Cellulose nanocrystals (CNCs) were produced from cellulose extracted from apple pomace (AP). In the alkaline treatment step for cellulose extraction, three variables, the NaOH concentration (6-12%), extraction time (30-240 min), and temperature (30-90 °C) were optimized through response surface methodology (RSM) for highest yield, highest purity (α-cellulose), and whiteness index (WI). The optimum conditions were determined as 10.23% NaOH, 69.82 °C, and 161.54 min, where the cellulose yield was found as 27.96 ± 0.78%, α-cellulose content was 85.31 ± 0.91% and WI was 47.79 ± 0.65%. The acid hydrolysis and ultrasonication treatments were applied to the cellulose to produce CNCs. Morphological analysis of CNCs was revealed the formation of a needle-like structure with averages of 7.9 ± 1.25 nm in diameter and 28 ± 2.03 nm in length. Meanwhile, the XRD diffraction and thermal analysis showed that CNCs have 78% crystallinity index higher than α-cellulose (69%), and is thermally less stable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Official Methods of Analysis of AOAC International
Horwitz, W., & LATIMER, G. W. (2006) · Medical Entomology and Zoology · Cited by 11,170
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Official Methods of Analysis of AOAC INTERNATIONAL
(2023) · Oxford University Press eBooks · doi:10.1093/9780197610145.001.0001 · Cited by 5,816
Extraction of cellulose and preparation of nanocellulose from sisal fibers
Morán, J. I., Alvarez, V. A., Cyras, V. P., & Vázquez, A. (2008) · Cellulose · doi:10.1007/s10570-007-9145-9 · Cited by 1,507
Elazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Design and Analysis of Experiments
Amidan, B., Dean, A., & Voss, D. (2000) · Technometrics · doi:10.2307/1271085 · Cited by 1,158
Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization
Mandal, A., & Chakrabarty, D. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.030 · Cited by 1,073
Chen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., & Hai, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.040 · Cited by 971
Rodlike cellulose microcrystals: Structure, properties and applications
de Souza Lima, M. M., & Borsali, R. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200300268 · Cited by 894
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Kumar, A., Singh Negi, Y., Choudhary, V., & Kant Bhardwaj, N. (2020) · Journal of Materials Physics and Chemistry · doi:10.12691/jmpc-2-1-1 · Cited by 682
Extraction and characterization of nanocellulose structures from raw cotton linter
Morais, J. P. S., Rosa, M. D. F., de Souza Filho, M. D. S. M., Nascimento, L. D., do Nascimento, D. M., & Cassales, A. R. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.08.010 · Cited by 564
Fast pyrolysis of biomass in free-fall reactor for hydrogen-rich gas
Li, S., Xu, S., Liu, S., Yang, C., & Lu, Q. (2004) · Fuel Processing Technology · doi:10.1016/j.fuproc.2003.11.043 · Cited by 516
Isolation and characterisation of cellulose nanocrystals from sago seed shells
Naduparambath, S., T.V., J., V., S., M.P., S., Balan, A. K., & E., P. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.088 · Cited by 373
The use of nanocrystalline cellulose for the binding and controlled release of drugs
Letchford, Jackson, Wasserman, B., Ye, Hamad, W., & Burt, H. (2011) · International Journal of Nanomedicine · doi:10.2147/ijn.s16749 · Cited by 372
Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment
Tibolla, H., Pelissari, F. M., & Menegalli, F. C. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2014.04.011 · Cited by 358
Ultrarobust Transparent Cellulose Nanocrystal‐Graphene Membranes with High Electrical Conductivity
Xiong, R., Hu, K., Grant, A. M., Ma, R., Xu, W., Lu, C., Zhang, X., & Tsukruk, V. V. (2016) · Advanced Materials · doi:10.1002/adma.201504438 · Cited by 336
Cellulose nanocrystal isolation from tomato peels and assembled nanofibers
Jiang, F., & Hsieh, Y.-L. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.064 · Cited by 329
Structure and properties of the nanocomposite films of chitosan reinforced with cellulose whiskers
Li, Q., Zhou, J., & Zhang, L. (2009) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21711 · Cited by 311
Isolation and Characterization of Cellulose from Different Fruit and Vegetable Pomaces
Szymańska-Chargot, M., Chylińska, M., Gdula, K., Kozioł, A., & Zdunek, A. (2017) · Polymers · doi:10.3390/polym9100495 · Cited by 295
By-products of fruits processing as a source of phytochemicals
Djilas, S., Canadanovic-Brunet, J., & Cetkovic, G. (2009) · Chemical Industry and Chemical Engineering Quarterly · doi:10.2298/ciceq0904191d · Cited by 282
Apple Pomace: A Versatile Substrate for Biotechnological Applications
Vendruscolo, F., Albuquerque, P. M., Streit, F., Esposito, E., & Ninow, J. L. (2008) · Critical Reviews in Biotechnology · doi:10.1080/07388550801913840 · Cited by 270
Rambabu, N., Panthapulakkal, S., Sain, M., & Dalai, A. K. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.11.083 · Cited by 218
Lu, H., Gui, Y., Zheng, L., & Liu, X. (2013) · Food Research International · doi:10.1016/j.foodres.2012.10.013 · Cited by 206
Xu, K., Liu, C., Kang, K., Zheng, Z., Wang, S., Tang, Z., & Yang, W. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.10.022 · Cited by 179
Hemicelluloses and Their Derivatives
Sun, R.-C., Sun, X. F., & Tomkinson, J. (2003) · ACS symposium series · doi:10.1021/bk-2004-0864.ch001 · Cited by 176
Wang, Q., Yu, D.-G., Zhang, L.-L., Liu, X.-K., Deng, Y.-C., & Zhao, M. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.075 · Cited by 172
Cellulose nanocrystals from grape pomace: Production, properties and cytotoxicity assessment
Coelho, C. C. S., Michelin, M., Cerqueira, M. A., Gonçalves, C., Tonon, R. V., Pastrana, L. M., Freitas-Silva, O., Vicente, A. A., Cabral, L. M. C., & Teixeira, J. A. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.023 · Cited by 161
Hemicelluloses: Science and Technology
(2003) · ACS Symposium Series · doi:10.1021/bk-2004-0864 · Cited by 148
Sun, X. (2003) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.10.004 · Cited by 105
Management of citrus waste by switching in the production of nanocellulose
Naz, S., Ahmed, N., Akhtar, J., Ahmad, N. M., Ali, A., & Zia, M. (2016) · IET Nanobiotechnology · doi:10.1049/iet-nbt.2015.0116 · Cited by 80
Dai, H., & Huang, H. (2016) · Cellulose · doi:10.1007/s10570-016-1101-0 · Cited by 76
Fragal, E. H., Cellet, T. S. P., Fragal, V. H., et al. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.07.063 · Cited by 67
Extraction and partial characterization of Solanum lycocarpum pectin
Torralbo, D. F., Batista, K. D. A., Di-Medeiros, M. C. B., & Fernandes, K. F. (2011) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2011.10.012 · Cited by 55
Nitrogen Doped Macroporous Carbon as Electrode Materials for High Capacity of Supercapacitor
Li, Y., Xu, X., He, Y., Jiang, Y., & Lin, K. (2017) · Polymers · doi:10.3390/polym9010002 · Cited by 42
Extraction of Cellulose from Kepok Banana Peel (Musa parasidiaca L.) for Adsorption Procion Dye
Hariani, P. L., Riyanti, F., & Asmara, R. D. (2016) · Molekul · doi:10.20884/1.jm.2016.11.1.202 · Cited by 18
Nanoselüloz üretim teknolojisi
Tozluoğlu, A., Çöpür, Y., Özyürek, Ö., & Çıtlak, S. (2015) · Turkish Journal of Forestry | Türkiye Ormancılık Dergisi · doi:10.18182/tjf.09718 · Cited by 10
Cited by
Production routes to tailor the performance of cellulose nanocrystals
Vanderfleet, O. M., & Cranston, E. D. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00239-y · Cited by 456
Abolore, R. S., Jaiswal, S., & Jaiswal, A. K. (2024) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2023.100396 · Cited by 425
Emerging technologies for the production of nanocellulose from lignocellulosic biomass
Pradhan, D., Jaiswal, A. K., & Jaiswal, S. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119258 · Cited by 294
Kusmono, Listyanda, R. F., Wildan, M. W., & Ilman, M. N. (2020) · Heliyon · doi:10.1016/j.heliyon.2020.e05486 · Cited by 231
Makhado, E., Seleka, W. M., Mahlaule Glory, L., Selowa, K., Abu Elella, M. H., Botlhoko, O. J., Satekge, T. K., & Hato, M. J. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.147842 · Cited by 22
Metadata
- Authors
- Melikoğlu, A. Y., Bilek, S. E., & Cesur, S.
- Venue
- Carbohydrate Polymers
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 215
- Pages
- 330-337
- ISSN
- 0144-8617 (ISSN-L)
- OpenAlex
- W2932512337
- Cited by
- 298
- References
- 38
- FWCI
- 6.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.