The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Characterization of cellulose fibers in Thespesia populnea barks: Influence of alkali treatment
Abstract
Natural fibers are emerging as best alternatives for synthetic materials in selective applications. These fibers may not have the required properties in its raw form and hence needs some alterations in its characteristics. Likely, this article reports enhancement in surface and structural properties of Thespesia populnea bark fiber treated with NaOH under various concentration and soaking period. Fibers treated with 5% NaOH for 60 min yields noteworthy mechanical strength (678.41 ± 48.91 MPa) owing to its relatively high cellulose fraction (76.42%). Fourier transform infrared spectra endorses the removal of non-cellulosic compounds and X-ray diffraction studies reveals 13.6% growth in the size of cellulose crystals on optimally treated fibers. Weibull distribution model statistically interprets the reliability of acquired tensile test results. Finally, microscopic examinations with scanning electron microscopy and atomic force microscopy explore that fiber surface turns rough after alkali treatment and makes it appropriate for reinforcement in polymer matrices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Park, S., Baker, J. O., Himmel, M. E., Parilla, P. A., & Johnson, D. K. (2010) · Biotechnology for Biofuels · doi:10.1186/1754-6834-3-10 · Cited by 3,395
Idealized powder diffraction patterns for cellulose polymorphs
French, A. D. (2014) · Cellulose · doi:10.1007/s10570-013-0030-4 · Cited by 3,247
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,694
A simple, sensitive graphical method of treating thermogravimetric analysis data
Broido, A. (1969) · Journal of Polymer Science Part A-2: Polymer Physics · doi:10.1002/pol.1969.160071012 · Cited by 900
Cellulose and Cellulose Derivatives
(2005) · Elsevier eBooks · doi:10.1016/b978-0-444-82254-3.x5000-0 · Cited by 852
De Rosa, I. M., Kenny, J. M., Puglia, D., Santulli, C., & Sarasini, F. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.09.013 · Cited by 576
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.045 · Cited by 568
Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis.L
Senthamaraikannan, P., & Kathiresan, M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.072 · Cited by 540
Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens
Vijay, R., Lenin Singaravelu, D., Vinod, A., Sanjay, M. R., Siengchin, S., Jawaid, M., Khan, A., & Parameswaranpillai, J. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.056 · Cited by 470
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.002 · Cited by 448
Gassan, J., & Bledzki, A. K. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(97)00042-0 · Cited by 444
Characterization of a novel natural cellulosic fiber from Prosopis juliflora bark
Saravanakumar, S. S., Kumaravel, A., Nagarajan, T., Sudhakar, P., & Baskaran, R. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.064 · Cited by 441
Self-citationFiore, V., Scalici, T., & Valenza, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.016 · Cited by 417
Characterization of a novel natural cellulosic fiber from Juncus effusus L.
Maache, M., Bezazi, A., Amroune, S., Scarpa, F. L., & Dufresne, A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.096 · Cited by 408
Characterization of new natural cellulosic fiber from Lygeum spartum L.
Belouadah, Z., Ati, A., & Rokbi, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.08.024 · Cited by 378
Isolation and characterization of cellulose nanofibrils from Helicteres isora plant
Chirayil, C. J., Joy, J., Mathew, L., Mozetic, M., Koetz, J., & Thomas, S. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.04.020 · Cited by 373
Sreenivasan, V. S., Somasundaram, S., Ravindran, D., Manikandan, V., & Narayanasamy, R. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.06.004 · Cited by 372
A.N., B., & K.J., N. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.065 · Cited by 334
Tensile and structural characterization of alkali treated Borassus fruit fine fibers
Reddy, K. O., Maheswari, C. U., Shukla, M., Song, J. I., & Rajulu, A. V. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.04.075 · Cited by 330
Characterization of lignocellulosic curaua fibres
Spinacé, M. A. S., Lambert, C. S., Fermoselli, K. K. G., & De Paoli, M.-A. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.12.005 · Cited by 309
N., S., I., R., & T., R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.127 · Cited by 289
Influence of alkali treatment on internal microstructure and tensile properties of abaca fibers
Cai, M., Takagi, H., Nakagaito, A. N., Katoh, M., Ueki, T., Waterhouse, G. I. N., & Li, Y. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.11.048 · Cited by 278
Advanced High Strength Natural Fibre Composites in Construction
(2016) · Elsevier eBooks · doi:10.1016/c2014-0-03942-1 · Cited by 278
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.124 · Cited by 257
Ilyas, R. A., Sapuan, S. M., Sanyang, M. L., Ishak, M. R., & Zainudin, E. S. (2018) · Current Analytical Chemistry · doi:10.2174/1573411013666171003155624 · Cited by 253
Seki, Y., Sarikanat, M., Sever, K., & Durmuşkahya, C. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.03.013 · Cited by 252
A review of natural fibres, their sustainability and automotive applications
Dunne, R. K., Desai, D. A., Sadiku, E. R., & Jayaramudu, J. (2016) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684416633898 · Cited by 249
Arthanarieswaran, V. P., Kumaravel, A., & Kathirselvam, M. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.058 · Cited by 236
Self-citationRidzuan, M. J. M., Majid, M. S. A., AFENDI, M., Kanafiah, S. N. A. M., Zahri, J. M., & Gibson, A. G. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.052 · Cited by 222
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2017) · BioResources · doi:10.15376/biores.12.4.8734-8754 · Cited by 218
Allomorphs of native crystalline cellulose I evaluated by two equatoriald-spacings
Wada, M., Okano, T., & Sugiyama, J. (2001) · Journal of Wood Science · doi:10.1007/bf00780560 · Cited by 207
Yusriah, L., Sapuan, S. M., Zainudin, E. S., & Mariatti, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.02.025 · Cited by 201
Tensile deformation of a flax fiber
Charlet, K., Eve, S., Jernot, J. P., Gomina, M., & Breard, J. (2009) · Procedia Engineering · doi:10.1016/j.proeng.2009.06.055 · Cited by 195
Catalytic Conversion of Structural Carbohydrates and Lignin to Chemicals
Shrotri, A., Kobayashi, H., & Fukuoka, A. (2017) · Advances in catalysis · doi:10.1016/bs.acat.2017.09.002 · Cited by 191
Focher, B., Palma, M. T., Canetti, M., Torri, G., Cosentino, C., & Gastaldi, G. (2001) · Industrial Crops and Products · doi:10.1016/s0926-6690(00)00077-7 · Cited by 178
Kathirselvam, M., Kumaravel, A., Arthanarieswaran, V. P., & Saravanakumar, S. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.02.044 · Cited by 176
Self-citationSugar Palm Starch-Based Composites for Packaging Applications
Sanyang, M. L., Ilyas, R. A., Sapuan, S. M., & Jumaidin, R. (2017) · Springer eBooks · doi:10.1007/978-3-319-67319-6_7 · Cited by 167
Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures
Fiore, V., Valenza, A., & Bella, G. D. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.04.003 · Cited by 163
Morphological and crystalline characterization of NaOH and NaOCl treated Agave americana L. fiber
Oudiani, A. E., Chaabouni, Y., Msahli, S., & Sakli, F. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.09.012 · Cited by 157
On the microstructure and physical properties of untreated raffia textilis fiber
Elenga, R. G., Dirras, G. F., Goma, J., Djémia, P., & Biget, M. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.001 · Cited by 129
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/368/1/012006 · Cited by 113
Effect of Alkali Treatment on Alfa Fibers Behavior
Mouhoubi, S., Bourahli, M. E. H., Osmani, H., & Abdeslam, S. (2016) · Journal of Natural Fibers · doi:10.1080/15440478.2016.1193088 · Cited by 86
Thermal and flame retardancy properties of thermoplastics/natural fiber biocomposites
Fu, S., Song, P., & Liu, X. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100411-1.00019-4 · Cited by 60
(2014) · Elsevier eBooks · doi:10.1016/c2013-0-16304-0 · Cited by 58
Treatments for viable utilization of vegetable fibers in inorganic-based composites
Arsène, M.-A., Bilba, K., & Potiron, C. O. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-102001-2.00004-8 · Cited by 24
Cited by
Valorization of Hemp Hurds as Bio-Sourced Additives in PLA-Based Biocomposites
Momeni, S., Safder, M., Khondoker, M. A. H., & Elias, A. L. (2021) · Polymers · doi:10.3390/polym13213786 · Cited by 40
Metadata
- Authors
- Kathirselvam, M., Kumaravel, A., Arthanarieswaran, V. P., & Saravanakumar, S. S.
- Venue
- Carbohydrate Polymers
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 217
- Pages
- 178-189
- ISSN
- 0144-8617 (ISSN-L)
- OpenAlex
- W2937725300
- Cited by
- 269
- References
- 48
- FWCI
- 10.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.