Effects of nitrogen and oxygen functional groups and pore width of activated carbon on carbon dioxide capture: Temperature dependence
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
In this work, activated carbon (AC) was prepared from bamboo waste using heat treatment. The AC was then modified to be nitrogen- and oxygen-enriched ACs by integration with urea, air oxidation, and KOH activation. At 25 °C, the nitrogen-enriched sample showed the highest CO2 adsorption affinity (uptake in pore at low pressures) and capacity (uptake in pore at moderate pressures, i.e., 1 bar). Whereas even at 0 °C, it still gave the highest affinity, but its capacity was reduced to be slightly lower than other samples. Consequently, a Grand Canonical Monte Carlo simulation was performed to macroscopically and microscopically investigate the CO2 adsorption behavior occurring in the experiments. The graphitic slit pore, in the pore width range of 0.7–1.5 nm, without a surface functional group (SFG), with pyridine (N-6), and with hydroxyl (OH) functional groups were modeled. (1) Adsorption affinity: the active site of SFG is dominant where CO2 molecules have the strongest interaction with N-functional group for all studied temperatures. The simulated results are consistent with the experimental data. (2) Adsorption capacity: the effect of pore width is more relevant. A sample with a more effective pore size gives higher capacity. However, the effective pore widths oscillated with temperature. High capacity at a suitable pore width resulted from the balance between the energy of motion and the packing of adsorbed molecules in order to optimize the energy. The energy of motion is more distinctive at high temperature; whereas, the commensurate packing is essential at low temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
The preparation of active carbons from coal by chemical and physical activation
Ahmadpour, A., & Do, D. D. (1996) · Carbon · doi:10.1016/0008-6223(95)00204-9 · Cited by 763
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Wang, L., Rao, L., Xia, B., Wang, L., Yue, L., Liang, Y., DaCosta, H., & Hu, X. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.003 · Cited by 172
Superior carbon-based CO2 adsorbents prepared from poplar anthers
Song, J., Shen, W., Wang, J., & Fan, W. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.024 · Cited by 99
Cited by
Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture
He, S., Chen, G., Xiao, H., Shi, G., Ruan, C., Ma, Y., Dai, H., Yuan, B., Chen, X., & Yang, X. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.08.021 · Cited by 375
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Carbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Zhou, S., Xu, H., Wang, S., Feng, H., Hu, Y., & Zhang, S. (2024) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.169856 · Cited by 52
Metadata
- Authors
- Dilokekunakul, W., Teerachawanwong, P., Klomkliang, N., Supasitmongkol, S., & Chaemchuen, S.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 389
- Pages
- 124413
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3005571298
- Cited by
- 129
- References
- 11
- FWCI
- 7.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.