The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Thermally insulating, fiber-reinforced alumina–silica aerogel composites with ultra-low shrinkage up to 1500 °C
Abstract
Abstract Highly porous, heat resisting and thermal insulating alumina-based aerogel materials are considered as promising high-temperature thermal insulations. The major obstacles for their applications are poor mechanical strengths, transparency to infrared radiation and complex preparation processes. In this study, a direct sol-immersion-gel (SIG) and supercritical fluid drying (SCFD) strategy for synthesizing mullite fiber reinforced alumina–silica aerogel composites (MFASs) was developed to overcome these problems. No tedious operation such as solvent exchange or gel modification was needed. The MFASs, with bulk density less than 0.4 g/cm3, experienced no deformation and ultra-low dimensional shrinkage even under 1500 °C exposure at air atmosphere, also exhibit good compressive strength and toughness. Thanks to cooperation of mullite fibers and the alumina–silica aerogel (ASA), the MFASs show quite low thermal conductivity (0.082 W/(m·K) at 1200 °C) and proved to be extremely thermal insulating during the quartz lamp heating test at 1500 °C. The light-weight, strong MFASs with superior heat resistance and thermal insulating performances can satisfy the urgent need for high-temperature thermal insulations such as thermal protection system (TPS) for space vehicles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Double-negative-index ceramic aerogels for thermal superinsulation
Xu, X., Zhang, Q., Hao, M., Hu, Y., Lin, Z., Peng, L., Wang, T., Ren, X., Wang, C., Zhao, Z., et al. (2019) · Science · doi:10.1126/science.aav7304 · Cited by 793
Aerogel-based thermal superinsulation: an overview
Koebel, M., Rigacci, A., & Achard, P. (2012) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-012-2792-9 · Cited by 705
Si, Y., Wang, X., Dou, L., Yu, J., & Ding, B. (2018) · Science Advances · doi:10.1126/sciadv.aas8925 · Cited by 673
Thermal Conductivity of Monolithic Organic Aerogels
Lu, X., Arduini-Schuster, M. C., Kuhn, J., Nilsson, O., Fricke, J., & Pekala, R. W. (1992) · Science · doi:10.1126/science.255.5047.971 · Cited by 563
Ultralight, Recoverable, and High-Temperature-Resistant SiC Nanowire Aerogel
Su, L., Wang, H., Niu, M., Fan, X., Ma, M., Shi, Z., & Guo, S.-W. (2018) · ACS Nano · doi:10.1021/acsnano.7b08577 · Cited by 496
Thermal conductivities study on silica aerogel and its composite insulation materials
Wei, G., Liu, Y., Zhang, X., Yu, F., & Du, X. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.02.026 · Cited by 457
Thermal properties of organic and inorganic aerogels
Hrubesh, L. W., & Pekala, R. W. (1994) · Journal of Materials Research · doi:10.1557/jmr.1994.0731 · Cited by 415
Synthesis of High-Surface-Area Alumina Aerogels without the Use of Alkoxide Precursors
Baumann, T. F., Gash, A. E., Chinn, S. C., Sawvel, A. M., Maxwell, R. S., & Satcher, J. H. (2005) · Chemistry of Materials · doi:10.1021/cm048800m · Cited by 410
Correlation between structure and thermal conductivity of organic aerogels
Lu, X., Caps, R., Fricke, J., Alviso, C. T., & Pekala, R. W. (1995) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(95)00191-3 · Cited by 330
Nanoengineering Super Heat-Resistant, Strong Alumina Aerogels
Zu, G., Shen, J., Zou, L., Wang, W., Lian, Y., Zhang, Z., & Du, A. (2013) · Chemistry of Materials · doi:10.1021/cm402900y · Cited by 264
Theoretical study on thermal conductivities of silica aerogel composite insulating material
Xie, T., He, Y.-L., & Hu, Z.-J. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.11.016 · Cited by 252
Determination of mesopore size of aerogels from thermal conductivity measurements
Lee, O.-J., Lee, K.-H., Jin Yim, T., Young Kim, S., & Yoo, K.-P. (2002) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(01)01041-9 · Cited by 241
Litovsky, E., Shapiro, M., & Shavit, A. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb08598.x · Cited by 211
Zu, G., Shen, J., Wang, W., Zou, L., Lian, Y., Zhang, Z., Liu, B., & Zhang, F. (2014) · Chemistry of Materials · doi:10.1021/cm502886t · Cited by 204
Synthesis of high porosity, monolithic alumina aerogels
Poco, J. F., Satcher, J. H., & Hrubesh, L. W. (2001) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(01)00432-x · Cited by 202
Ultra-low thermal conductivity and high strength of aerogels/fibrous ceramic composites
He, J., Li, X., Su, D., Ji, H., & Wang, X. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.11.021 · Cited by 200
Wang, F., Dou, L., Dai, J., Li, Y., Huang, L., Si, Y., Yu, J., & Ding, B. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202001679 · Cited by 200
Conduction and Radiation Heat Transfer in High-Porosity Fiber Thermal Insulation
Lee, S.-C., & Cunnington, G. R. (2000) · Journal of Thermophysics and Heat Transfer · doi:10.2514/2.6508 · Cited by 191
Preparation and characterization of monolithic alumina aerogels
Zu, G., Shen, J., Wei, X., Ni, X., Zhang, Z., Wang, J., & Liu, G. (2011) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2011.03.031 · Cited by 183
Relationship between pore size and the gas pressure dependence of the gaseous thermal conductivity
Reichenauer, G., Heinemann, U., & Ebert, H.-P. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2007.01.020 · Cited by 176
Wu, X., Shao, G., Cui, S., Wang, L., & Shen, X. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.09.012 · Cited by 154
Xu, L., Jiang, Y., Feng, J., Feng, J., & Yue, C. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.08.088 · Cited by 137
Self-citationZou, W., Wang, X., Wu, Y., Zou, L., Zu, G., Chen, D., & Shen, J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.09.223 · Cited by 131
Isothermal sintering of SiO2-aerogels
Emmerling, A., Gross, J., Gerlach, R., Goswin, R., Reichenauer, G., Fricke, J., & Haubold, H. ‐. (1990) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(90)90853-e · Cited by 113
Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths
Tokudome, Y., Nakanishi, K., Kanamori, K., Fujita, K., Akamatsu, H., & Hanada, T. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.06.042 · Cited by 109
Wu, X., Shao, G., Shen, X., Cui, S., & Wang, L. (2015) · RSC Advances · doi:10.1039/c5ra19764c · Cited by 108
Peng, F., Jiang, Y., Feng, J., Li, L., Cai, H., & Feng, J. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.01.058 · Cited by 107
Self-citationNovel whisker-reinforced Al 2 O 3 –SiO 2 aerogel composites with ultra-low thermal conductivity
Hou, X., Zhang, R., & Fang, D. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.04.043 · Cited by 103
Yu, H., Jiang, Y., Lu, Y., Li, X., Zhao, H., Ji, Y., & Wang, M. (2018) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.10.039 · Cited by 101
Self-citationThermal conductivity of fiber and opacifier loaded silica aerogel composite
Zhang, H., Fang, W., Wang, X., Li, Y., & Tao, W. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.08.006 · Cited by 89
Li, H., Chen, Y., Wang, P., Xu, B., Ma, Y., Wen, W., Yang, Y., & Fang, D. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.11.064 · Cited by 89
Heat Treatment of Alumina Aerogels
Keysar, S., Shter, G. E., de Hazan, Y., Cohen, Y., & Grader, G. S. (1997) · Chemistry of Materials · doi:10.1021/cm970208s · Cited by 87
Hayase, G., Nonomura, K., Hasegawa, G., Kanamori, K., & Nakanishi, K. (2014) · Chemistry of Materials · doi:10.1021/cm503993n · Cited by 78
Zhao, J., Duan, Y., Wang, X., & Wang, B. (2012) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/46/1/015304 · Cited by 76
Coupling of gaseous and solid thermal conduction in porous solids
Swimm, K., Vidi, S., Reichenauer, G., & Ebert, H.-P. (2016) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2016.11.012 · Cited by 75
Zhang, H., Fang, W., Li, Z.-Y., & Tao, W. (2015) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2015.08.027 · Cited by 73
Novel Al2O3–SiO2 aerogel/porous zirconia composite with ultra-low thermal conductivity
Zhang, R., Ye, C., & Wang, B. (2017) · Journal of Porous Materials · doi:10.1007/s10934-017-0430-1 · Cited by 69
Cai, H., Jiang, Y., Feng, J., Chen, Q., Zhang, S., Li, L., & Feng, J. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.02.011 · Cited by 68
Self-citationOptimization of Alumina and Aluminosilicate Aerogel Structure for High‐Temperature Performance
Hurwitz, F. I., Gallagher, M., Olin, T. C., Shave, M. K., Ittes, M. Α., Olafson, K. N., Fields, M. G., Guo, H., & Rogers, R. B. (2014) · International Journal of Applied Glass Science · doi:10.1111/ijag.12070 · Cited by 51
High surface area alumina aerogel at elevated temperatures
Horiuchi, T., Osaki, T., Sugiyama, T., Masuda, H., Horio, M., Suzuki, K., Mori, T., & Sago, T. (1994) · Journal of the Chemical Society Faraday Transactions · doi:10.1039/ft9949002573 · Cited by 50
Biotemplated Lightweight γ-Alumina Aerogels
Nguyen, T., Tang, D., D’Acierno, F., Michal, C. A., & MacLachlan, M. J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04800 · Cited by 49
Mechanical and thermal conductive properties of fiber‐reinforced silica‐alumina aerogels
Yu, Y., Peng, K., Fang, J., Zhang, R., Wang, G., & Peng, X. (2018) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12891 · Cited by 49
Structure and morphology evolution of silica-modified pseudoboehmite aerogels during heat treatment
Pakharukova, V. P., Shalygin, A. S., Gerasimov, E. Y., Tsybulya, S. V., & Martyanov, O. N. (2015) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2015.11.007 · Cited by 47
Gao, M., Liu, B., Zhao, P., Yi, X., Shen, X., & Xu, Y. (2019) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-019-05057-5 · Cited by 47
Zou, W., Wang, X., Wu, Y., Zu, G., Zou, L., Zhang, R., Yao, X., & Shen, J. (2017) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-017-4380-5 · Cited by 43
Investigation of the effect of alumina-aerogel support on the CO2 capture performance of K2CO3
Bararpour, S. T., Karami, D., & Mahinpey, N. (2019) · Fuel · doi:10.1016/j.fuel.2018.12.123 · Cited by 41
Wang, W., Zhang, Z., Zu, G., Shen, J., Zou, L., Lian, Y., Liu, B., & Zhang, F. (2014) · RSC Advances · doi:10.1039/c4ra08832h · Cited by 40
He, F., Zhou, L., Zhang, X., Li, W., Yang, L., Zhao, H., & He, X. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.03.089 · Cited by 40
Gao, B., Yuan, G., & Ren, L. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-1988-y · Cited by 28
Cited by
Parale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
Silica Aerogel: Synthesis, Characterization, Applications, and Recent Advancements
Rashid, A. B., Shishir, S. I., Mahfuz, M. A., Hossain, M. T., & Hoque, M. E. (2023) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.202200186 · Cited by 86
Thermal Insulation Performance of Aerogel Nano-Porous Materials: Characterization and Test Methods
Lou, F., Dong, S., Zhu, K., Chen, X., & Ma, Y. (2023) · Gels · doi:10.3390/gels9030220 · Cited by 76
Sharma, J., Sheikh, J., & Behera, B. K. (2023) · Drying Technology · doi:10.1080/07373937.2022.2162918 · Cited by 19
“Various reinforcing phases, such as whisker fibers,([54,84]) nanotubes,([85]) and particles,([86,87]) are incorporated into the pure aerogel matrix to enhance its structural integrity.”
BackgroundSomakli, S., & Butun Sengel, S. (2023) · Silicon · doi:10.1007/s12633-023-02546-9 · Cited by 2
Metadata
- Authors
- Peng, F., Jiang, Y., Feng, J., Cai, H., Feng, J., & Li, L.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 411
- Pages
- 128402
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3119197617
- Cited by
- 275
- References
- 50
- FWCI
- 14.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.