The DOI matches its Crossref record; 135 of the 135 references it cites were found in a registry or an index.
Supplementary cementitious materials: New sources, characterization, and performance insights
Abstract
Abstract Conventional supplementary cementitious materials (SCMs), such as blast furnace slags or fly ashes, have been used for many decades, and a large body of knowledge has been collected regarding their compositional make-up and their impacts on cement hydration and concrete properties. This accumulated empirical experience can provide a solid, confident base to go beyond the status quo and develop a new generation of low-clinker cements composed of new types and combinations of SCMs. The need for new sources of SCMs has never been greater, as supplies of traditional SCMs are becoming restricted, and the demand for SCMs to reduce CO2 emissions from concrete production is increasing. In this paper, recent research on emerging SCM sources is reviewed, along with new developments in characterizing and qualifying SCMs for use and improved knowledge of SCMs on long-term concrete performance and durability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
A Practical Guide to Microstructural Analysis of Cementitious Materials
(2018) · CRC Press eBooks · doi:10.1201/b19074 · Cited by 2,110
Calcined clay limestone cements (LC3)
Scrivener, K., Martirena, F., Bishnoi, S., & Maity, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.017 · Cited by 1,763
Metakaolin and calcined clays as pozzolans for concrete: a review
Sabir, B. B., Wild, S., & Bai, J. (2001) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00092-5 · Cited by 1,465
Avet, F., & Scrivener, K. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.016 · Cited by 864
Characteristics of steel slags and their use in cement and concrete—A review
Jiang, Y., Ling, T.-C., Shi, C., & Pan, S.-Y. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.023 · Cited by 818
Avet, F., Snellings, R., Alujas Diaz, A., Ben Haha, M., & Scrivener, K. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.02.015 · Cited by 767
Self-citationDhandapani, Y., Sakthivel, T., Santhanam, M., Gettu, R., & Pillai, R. G. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.005 · Cited by 635
Supplementary cementitious materials origin from agricultural wastes – A review
Aprianti, E., Shafigh, P., Bahri, S., & Farahani, J. N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.10.010 · Cited by 596
Miller, S. A., Horvath, A., & Monteiro, P. J. M. (2016) · Environmental Research Letters · doi:10.1088/1748-9326/11/7/074029 · Cited by 589
Research works printed but not linked: 50
- Kupwade-Patil, 2018, vol. 177, 547
- Kalina, 2019, False positives in ASTM C618 specifications for natural pozzolans, ACI Mater. J., 116, 165
- Dedeloudis, 2018, Natural pozzolans, 10.1007/978-3-319-70606-1_6 · doi:10.1007/978-3-319-70606-1_6
- 2012, vol. 232
- Diaz-Loya, 2019, Extending supplementary cementitious material resources: reclaimed and remediated fly ash and natural pozzolans, Cem. Concr. Compos., 101, 44, 10.1016/j.cemconcomp.2017.06.011 · doi:10.1016/j.cemconcomp.2017.06.011
- Ghafari, 2016, Feasibility of using natural SCMs in concrete for infrastructure applications, Constr. Build. Mater., 127, 724, 10.1016/j.conbuildmat.2016.10.070 · doi:10.1016/j.conbuildmat.2016.10.070
- Seraj, 2017, The role of particle size on the performance of pumice as a supplementary cementitious material, Cem. Concr. Compos., 80, 10.1016/j.cemconcomp.2017.03.009 · DOI
- Motahari Karein, 2018, Pretreatment of natural perlite powder by further milling to use as a supplementary cementitious material, Constr. Build. Mater., 186, 782, 10.1016/j.conbuildmat.2018.08.012 · doi:10.1016/j.conbuildmat.2018.08.012
- Páez-Flor, 2019, Microstructure-at-rest evolution and steady viscous flow behavior of fresh natural pozzolanic cement pastes, Constr. Build. Mater., 194, 360, 10.1016/j.conbuildmat.2018.11.009 · doi:10.1016/j.conbuildmat.2018.11.009
- Guynn, 2015, Maximizing SCM content of blended cements, IEEE Trans. Ind. Appl., 51, 4824, 10.1109/TIA.2015.2455029 · doi:10.1109/tia.2015.2455029
- Seraj, 2016, Calcining natural zeolites to improve their effect on cementitious mixture workability, Cem. Concr. Res., 85, 10.1016/j.cemconres.2016.04.002 · doi:10.1016/j.cemconres.2016.04.002
- Schulze, 2019, Suitability of natural calcined clays as supplementary cementitious material, Cem. Concr. Compos., 95, 92, 10.1016/j.cemconcomp.2018.07.006 · doi:10.1016/j.cemconcomp.2018.07.006
- Almenares, 2017, Industrial calcination of kaolinitic clays to make reactive pozzolans, Case Stud. Constr. Mater., 6, 225
- Krishnan, 2015, High level clinker replacement in ternary limestone-calcined clay-clinker cement, Vol. 3
- Kirsimäe, 2015, What shall we do with oil shale processing solid waste?, Oil Shale, 32, 201, 10.3176/oil.2015.3.01 · doi:10.3176/oil.2015.3.01
- Cordeiro, 2016, Improved pozzolanic activity of sugar cane bagasse ash by selective grinding and classification, Cem. Concr. Res., 89, 269, 10.1016/j.cemconres.2016.08.020 · doi:10.1016/j.cemconres.2016.08.020
- Bahurudeen, 2015, Influence of different processing methods on the pozzolanic performance of sugarcane bagasse ash, Cem. Concr. Compos., 56, 32, 10.1016/j.cemconcomp.2014.11.002 · doi:10.1016/j.cemconcomp.2014.11.002
- Wirth, 2019, Mineral phases and carbon content in weathered fly ashes, Fuel, 236, 1567, 10.1016/j.fuel.2018.09.106 · doi:10.1016/j.fuel.2018.09.106
- Shi, 2015, Preliminary investigation on the pozzolanic activity of superfine steel slag, Constr. Build. Mater., 82, 227, 10.1016/j.conbuildmat.2015.02.062 · doi:10.1016/j.conbuildmat.2015.02.062
- Kriskova, 2018, Transformation of stainless steel slag toward a reactive cementitious binder, J. Am. Ceram. Soc., 101, 1727, 10.1111/jace.15306 · doi:10.1111/jace.15306
- Rahman, 2017, Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag, Constr. Build. Mater., 140, 194, 10.1016/j.conbuildmat.2017.02.023 · doi:10.1016/j.conbuildmat.2017.02.023
- Saha, 2018, Value added utilization of by-product electric furnace ferronickel slag as construction materials: a review, Resour. Conserv. Recycl., 134, 10, 10.1016/j.resconrec.2018.02.034 · doi:10.1016/j.resconrec.2018.02.034
- Arvaniti, 2015, Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques, Mater. Struct. Constr., 48, 10.1617/s11527-014-0431-3 · doi:10.1617/s11527-014-0431-3
- Shoji, 2018, Classification of volcanic ash particles using a convolutional neural network and probability, Sci. Rep., 8, 10.1038/s41598-018-26200-2 · doi:10.1038/s41598-018-26200-2
- Li, 2018, Reactivity tests for supplementary cementitious materials: RILEM TC 267-TRM phase 1, Mater. Struct., 51, 10.1617/s11527-018-1269-x · doi:10.1617/s11527-018-1269-x
- McCarthy, 2017, Evaluation of fly ash reactivity potential using a lime consumption test, Mag. Concr. Res., 69, 954, 10.1680/jmacr.16.00505 · doi:10.1680/jmacr.16.00505
- Thorstensen, 2015, Inconsistencies in the pozzolanic strength activity index (SAI) for silica fume according to EN and ASTM, Mater. Struct., 48, 3979, 10.1617/s11527-014-0457-6 · doi:10.1617/s11527-014-0457-6
- Lindgård, 2012, Alkali–silica reactions (ASR): literature review on parameters influencing laboratory performance testing, Cem. Concr. Res., 42, 223, 10.1016/j.cemconres.2011.10.004 · doi:10.1016/j.cemconres.2011.10.004
- Hossain, 2004, Properties of volcanic pumice based cement and lightweight concrete, Cem. Concr. Res., 34, 283, 10.1016/j.cemconres.2003.08.004 · doi:10.1016/j.cemconres.2003.08.004
- Khoshroo, 2018, Effect of chloride treatment curing condition on the mechanical properties and durability of concrete containing zeolite and micro-nano-bubble water, Constr. Build. Mater., 177, 417, 10.1016/j.conbuildmat.2018.05.086 · doi:10.1016/j.conbuildmat.2018.05.086
- Samimi, 2017, Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes, Constr. Build. Mater., 151, 292, 10.1016/j.conbuildmat.2017.06.071 · doi:10.1016/j.conbuildmat.2017.06.071
- Kabay, 2015, Properties of concrete with pumice powder and fly ash as cement replacement materials, Constr. Build. Mater., 85, 1, 10.1016/j.conbuildmat.2015.03.026 · doi:10.1016/j.conbuildmat.2015.03.026
- Madani, 2018, The synergistic effect of pumice and silica fume on the durability and mechanical characteristics of eco-friendly concrete, Constr. Build. Mater., 174, 356, 10.1016/j.conbuildmat.2018.04.070 · doi:10.1016/j.conbuildmat.2018.04.070
- Ulusu, 2016, Investigation on characteristics of blended cements containing pumice, Constr. Build. Mater., 118, 11, 10.1016/j.conbuildmat.2016.05.030 · doi:10.1016/j.conbuildmat.2016.05.030
- Fernandes, 2007, The effect of clay content in sands used for cementitious materials in developing countries, Cem. Concr. Res., 37, 751, 10.1016/j.cemconres.2006.10.016 · doi:10.1016/j.cemconres.2006.10.016
- Muñoz, 2010, Detection of aggregate clay coatings and impacts on concrete, ACI Mater. J., 107, 387
- Langaroudi, 2018, Effect of nano-clay on workability, mechanical, and durability properties of self-consolidating concrete containing mineral admixtures, Constr. Build. Mater., 191, 619, 10.1016/j.conbuildmat.2018.10.044 · doi:10.1016/j.conbuildmat.2018.10.044
- Amar, 2018, Durability of a cementitious matrix based on treated sediments, Case Stud. Constr. Mater., 8, 258
- Safer, 2018, Valorization of dredged sediments as a component of vibrated concrete: durability of these concretes against sulfuric acid attack, Int. J. Concr. Struct. Mater., 12, 10.1186/s40069-018-0270-7 · doi:10.1186/s40069-018-0270-7
- Rahman, 2014, Thaumasite sulfate attack on concrete: mechanisms, influential factors and mitigation, Constr. Build. Mater., 73, 652, 10.1016/j.conbuildmat.2014.09.034 · doi:10.1016/j.conbuildmat.2014.09.034
- Barcelo, 2014, A modified ASTM C1012 procedure for qualifying blended cements containing limestone and SCMs for use in sulfate-rich environments, Cem. Concr. Res., 63, 75, 10.1016/j.cemconres.2014.05.007 · doi:10.1016/j.cemconres.2014.05.007
- Rezvani, 2019, Modelling the drying shrinkage of concrete made with limestone-rich cements, Cem. Concr. Res., 115, 160, 10.1016/j.cemconres.2018.09.003 · doi:10.1016/j.cemconres.2018.09.003
- Van Tittelboom, 2013, Test methods for resistance of concrete to sulfate attack–a critical review, 251
- Dhandapani, 2017, Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance, Cem. Concr. Compos., 84, 36, 10.1016/j.cemconcomp.2017.08.012 · doi:10.1016/j.cemconcomp.2017.08.012
- Mirvalad, 2015, Minimum SCM requirements in mixtures containing limestone cement to control thaumasite sulfate attack, Constr. Build. Mater., 84, 19, 10.1016/j.conbuildmat.2015.02.074 · doi:10.1016/j.conbuildmat.2015.02.074
- Adu-Amankwah, 2018, Relationship between cement composition and the freeze-thaw resistance of concretes, Adv. Cem. Res., 30, 387, 10.1680/jadcr.17.00138 · doi:10.1680/jadcr.17.00138
- Rajasekar, 2018, Durability characteristics of ultra high strength concrete with treated sugarcane bagasse ash, Constr. Build. Mater., 171, 350, 10.1016/j.conbuildmat.2018.03.140 · doi:10.1016/j.conbuildmat.2018.03.140
- Kazmi, 2017, Pozzolanic reaction of sugarcane bagasse ash and its role in controlling alkali silica reaction, Constr. Build. Mater., 148, 231, 10.1016/j.conbuildmat.2017.05.025 · doi:10.1016/j.conbuildmat.2017.05.025
- Idir, 2011, Pozzolanic properties of fine and coarse color-mixed glass cullet, Cem. Concr. Compos., 33, 19, 10.1016/j.cemconcomp.2010.09.013 · doi:10.1016/j.cemconcomp.2010.09.013
- Soive, 2018, The advantages of using a geochemical transport model including thermodynamic equilibrium, kinetic control and surface complexation to simulate the durability of concretes exposed to chlorides and sulphates, Eur. J. Environ. Civ. Eng., 1
Cited by
Reactivity of supplementary cementitious materials (SCMs) in cement blends
Skibsted, J., & Snellings, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105799 · Cited by 984
Self-citationFuture and emerging supplementary cementitious materials
Snellings, R., Suraneni, P., & Skibsted, J. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107199 · Cited by 606
Self-citationvon Greve-Dierfeld, S., Lothenbach, B., Vollpracht, A., Wu, B., Huet, B., Andrade, C., Medina, C., Thiel, C., Gruyaert, E., Vanoutrive, H., et al. (2020) · Materials and Structures · doi:10.1617/s11527-020-01558-w · Cited by 508
Self-citationAdvances in alkali-activation of clay minerals
Khalifa, A. Z., Cizer, Ö., Pontikes, Y., Heath, A., Patureau, P., Bernal, S. A., & Marsh, A. T. M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106050 · Cited by 436
Self-citationSmart materials and technologies for sustainable concrete construction
Nilimaa, J. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100177 · Cited by 387
Barbhuiya, S., Kanavaris, F., Das, B. B., & Idrees, M. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108861 · Cited by 378
Sustainable materials for 3D concrete printing
Bhattacherjee, S., Basavaraj, A. S., Rahul, A. V., Santhanam, M., Gettu, R., Panda, B., Schlangen, E., Chen, Y., Copuroglu, O., Ma, G., et al. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104156 · Cited by 321
Hao, H., Bi, K., Chen, W., Pham, T. M., & Li, J. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2022.115477 · Cited by 302
An overview of utilizing CO2 for accelerated carbonation treatment in the concrete industry
Li, L., & Wu, M. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102000 · Cited by 305
Panesar, D. K., & Zhang, R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118866 · Cited by 283
Cuesta, A., Santacruz, I., De la Torre, A. G., Dapiaggi, M., Zea-Garcia, J. D., & Aranda, M. A. G. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106405 · Cited by 168
Metadata
- Authors
- Juenger, M. C. G., Snellings, R., & Bernal, S. A.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 122
- Pages
- 257-273
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2945966691
- Cited by
- 1,260
- References
- 135
- Type
- supplementary materials
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Texas Department of Transportation (0-6717, 5-6717, 0-6966)
- Fonds voor Wetenschappelijk Onderzoek (30439691)
- Engineering and Physical Sciences Research Council (ECF EP/R001642/1)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.