The DOI matches its Crossref record; 135 of the 135 references it cites were found in a registry or an index.
Supplementary cementitious materials: New sources, characterization, and performance insights
Abstract
Abstract Conventional supplementary cementitious materials (SCMs), such as blast furnace slags or fly ashes, have been used for many decades, and a large body of knowledge has been collected regarding their compositional make-up and their impacts on cement hydration and concrete properties. This accumulated empirical experience can provide a solid, confident base to go beyond the status quo and develop a new generation of low-clinker cements composed of new types and combinations of SCMs. The need for new sources of SCMs has never been greater, as supplies of traditional SCMs are becoming restricted, and the demand for SCMs to reduce CO2 emissions from concrete production is increasing. In this paper, recent research on emerging SCM sources is reviewed, along with new developments in characterizing and qualifying SCMs for use and improved knowledge of SCMs on long-term concrete performance and durability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
A Practical Guide to Microstructural Analysis of Cementitious Materials
(2018) · CRC Press eBooks · doi:10.1201/b19074 · Cited by 2,110
Calcined clay limestone cements (LC3)
Scrivener, K., Martirena, F., Bishnoi, S., & Maity, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.017 · Cited by 1,763
Metakaolin and calcined clays as pozzolans for concrete: a review
Sabir, B. B., Wild, S., & Bai, J. (2001) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00092-5 · Cited by 1,465
Avet, F., & Scrivener, K. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.016 · Cited by 864
Characteristics of steel slags and their use in cement and concrete—A review
Jiang, Y., Ling, T.-C., Shi, C., & Pan, S.-Y. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.023 · Cited by 818
Avet, F., Snellings, R., Alujas Diaz, A., Ben Haha, M., & Scrivener, K. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.02.015 · Cited by 767
Self-citationDhandapani, Y., Sakthivel, T., Santhanam, M., Gettu, R., & Pillai, R. G. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.005 · Cited by 635
Supplementary cementitious materials origin from agricultural wastes – A review
Aprianti, E., Shafigh, P., Bahri, S., & Farahani, J. N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.10.010 · Cited by 596
Miller, S. A., Horvath, A., & Monteiro, P. J. M. (2016) · Environmental Research Letters · doi:10.1088/1748-9326/11/7/074029 · Cited by 589
Applications of using nano material in concrete: A review
Sidek, M. N. M., Hamidah, M. S., & Fadzil, A. M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.005 · Cited by 570
Wang, D., Shi, C., Farzadnia, N., Shi, Z., Jia, H., & Ou, Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.075 · Cited by 565
Alujas, A., Fernández, R., Quintana, R., Scrivener, K. L., & Martirena, F. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.01.028 · Cited by 539
A review of waste products utilized as supplements to Portland cement in concrete
Paris, J. M., Roessler, J. G., Ferraro, C. C., DeFord, H. D., & Townsend, T. G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.013 · Cited by 501
Use of natural zeolite as a supplementary cementitious material
Ahmadi, B., & Shekarchi, M. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.006 · Cited by 442
Shi, Z., Geiker, M. R., Lothenbach, B., De Weerdt, K., Garzón, S. F., Enemark-Rasmussen, K., & Skibsted, J. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.002 · Cited by 432
Performance evaluation of sugarcane bagasse ash blended cement in concrete
Bahurudeen, A., Kanraj, D., Gokul Dev, V., & Santhanam, M. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.004 · Cited by 406
Methods for determination of degree of reaction of slag in blended cement pastes
Kocaba, V., Gallucci, E., & Scrivener, K. L. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.11.010 · Cited by 381
Ke, X., Bernal, S. A., & Provis, J. L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.015 · Cited by 375
Self-citationInfluence of limestone on the hydration of ternary slag cements
Adu-Amankwah, S., Zajac, M., Stabler, C., Lothenbach, B., & Black, L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.013 · Cited by 365
Shi, Z., Lothenbach, B., Geiker, M. R., Kaufmann, J., Leemann, A., Ferreiro, S., & Skibsted, J. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.06.006 · Cited by 361
Mo, L., Zhang, F., Deng, M., Jin, F., Al-Tabbaa, A., & Wang, A. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.07.018 · Cited by 352
Assessing, Understanding and Unlocking Supplementary Cementitious Materials
Snellings, R. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.12 · Cited by 348
Self-citationPozzolanic reactivity of pure calcined clays
Hollanders, S., Adriaens, R., Skibsted, J., Cizer, Ö., & Elsen, J. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.08.003 · Cited by 343
Evolution of pore structure in blended systems
Berodier, E., & Scrivener, K. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.025 · Cited by 333
Role of calcium on chloride binding in hydrated Portland cement–metakaolin–limestone blends
Shi, Z., Geiker, M. R., De Weerdt, K., Østnor, T. A., Lothenbach, B., Winnefeld, F., & Skibsted, J. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.003 · Cited by 318
Auroy, M., Poyet, S., Le Bescop, P., Torrenti, J.-M., Charpentier, T., Moskura, M., & Bourbon, X. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.012 · Cited by 303
Elahi, A., Basheer, P. A. M., Nanukuttan, S. V., & Khan, Q. U. Z. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.08.045 · Cited by 302
Agricultural wastes as aggregate in concrete mixtures – A review
Shafigh, P., Mahmud, H. B., Jumaat, M. Z., & Zargar, M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.11.074 · Cited by 291
Durdziński, P. T., Dunant, C. F., Haha, M. B., & Scrivener, K. L. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.008 · Cited by 288
Green concrete partially comprised of farming waste residues: a review
Mo, K. H., Alengaram, U. J., Jumaat, M. Z., Yap, S. P., & Lee, S. C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.022 · Cited by 283
Han, F., Zhang, Z., Wang, D., & Yan, P. (2015) · Thermochimica Acta · doi:10.1016/j.tca.2015.02.018 · Cited by 282
Determination of the amount of reacted metakaolin in calcined clay blends
Avet, F., Li, X., & Scrivener, K. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.01.009 · Cited by 278
Maraghechi, H., Avet, F., Wong, H., Kamyab, H., & Scrivener, K. (2018) · Materials and Structures · doi:10.1617/s11527-018-1255-3 · Cited by 271
Joseph, A., Snellings, R., Van den Heede, P., Matthys, S., & De Belie, N. (2018) · Materials · doi:10.3390/ma11010141 · Cited by 269
Self-citationMiller, S. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.008 · Cited by 259
Carbonation of concrete: the role of CO2 concentration, relative humidity and CO2 buffer capacity
Leemann, A., & Moro, F. (2017) · Materials and Structures · doi:10.1617/s11527-016-0917-2 · Cited by 257
Suraneni, P., & Weiss, J. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.07.009 · Cited by 257
Limestone and silica powder replacements for cement: Early-age performance
Bentz, D. P., Ferraris, C. F., Jones, S. Z., Lootens, D., & Zunino, F. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.001 · Cited by 255
Early hydration of SCM-blended Portland cements: A pore solution and isothermal calorimetry study
Schöler, A., Lothenbach, B., Winnefeld, F., Haha, M. B., Zajac, M., & Ludwig, H.-M. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.11.013 · Cited by 252
Impact of the associated cation on chloride binding of Portland cement paste
De Weerdt, K., Colombo, A., Coppola, L., Justnes, H., & Geiker, M. R. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.01.027 · Cited by 248
Cement Technology Roadmap: Carbon Emissions Reductions up to 2050
International Energy Agency (2009) · IEA Technology Roadmaps · doi:10.1787/9789264088061-en · Cited by 242
Kunther, W., Lothenbach, B., & Skibsted, J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.12.002 · Cited by 238
Effect of carbonation on the pore solution of mortar
De Weerdt, K., Plusquellec, G., Belda Revert, A., Geiker, M. R., & Lothenbach, B. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.02.004 · Cited by 235
Snellings, R. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12480 · Cited by 229
Self-citationOptimization of SEM-EDS to determine the C–A–S–H composition in matured cement paste samples
Rossen, J. E., & Scrivener, K. L. (2017) · Materials Characterization · doi:10.1016/j.matchar.2016.11.041 · Cited by 229
Relation between carbonation resistance, mix design and exposure of mortar and concrete
Leemann, A., Nygaard, P., Kaufmann, J., & Loser, R. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.04.020 · Cited by 222
Chandra Paul, S., Šavija, B., & Babafemi, A. J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.095 · Cited by 219
Comparing chloride ingress from seawater and NaCl solution in Portland cement mortar
De Weerdt, K., Lothenbach, B., & Geiker, M. R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.09.014 · Cited by 219
Effect of calcium on dissolution and precipitation reactions of amorphous silica at high alkalinity
Maraghechi, H., Rajabipour, F., Pantano, C. G., & Burgos, W. D. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.05.004 · Cited by 215
Effect of mechanical processing on sugar cane bagasse ash pozzolanicity
Cordeiro, G. C., & Kurtis, K. E. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.03.008 · Cited by 198
Importance of using the natural pozzolans on concrete durability
Rodriguez-Camacho, R. E., & Uribe-Afif, R. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00714-1 · Cited by 190
Calcined kaolinite–bentonite clay blends as supplementary cementitious materials
Taylor-Lange, S. C., Lamon, E. L., Riding, K. A., & Juenger, M. C. G. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.01.025 · Cited by 186
Self-citationChan, S. Y. N., & Ji, X. (1999) · Cement and Concrete Composites · doi:10.1016/s0958-9465(99)00010-4 · Cited by 185
Zhou, D., Wang, R., Tyrer, M., Wong, H., & Cheeseman, C. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.098 · Cited by 183
Mechanical and durability properties of concretes incorporating natural zeolite
Markiv, T., Sobol, K., Franus, M., & Franus, W. (2016) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2016.03.013 · Cited by 180
Shah, V., & Bishnoi, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.162 · Cited by 180
Chloride-binding capacity of hydrotalcite in cement pastes containing dolomite and metakaolin
Machner, A., Zajac, M., Ben Haha, M., Kjellsen, K. O., Geiker, M. R., & De Weerdt, K. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.002 · Cited by 177
Rapid screening tests for supplementary cementitious materials: past and future
Snellings, R., & Scrivener, K. L. (2016) · Materials and Structures · doi:10.1617/s11527-015-0718-z · Cited by 176
Self-citationVegetable ashes as Supplementary Cementitious Materials
Martirena, F., & Monzó, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.015 · Cited by 176
Vejmelková, E., Koňáková, D., Kulovaná, T., Keppert, M., Žumár, J., Rovnaníková, P., Keršner, Z., Sedlmajer, M., & Černý, R. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.013 · Cited by 174
Evaluation of environmental impact distribution methods for supplementary cementitious materials
Hossain, M. U., Poon, C. S., Dong, Y. H., & Xuan, D. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.048 · Cited by 174
Characterisation of calcined raw clays suitable as supplementary cementitious materials
Danner, T., Norden, G., & Justnes, H. (2018) · Applied Clay Science · doi:10.1016/j.clay.2018.06.030 · Cited by 171
Research into the properties of concrete modified with natural zeolite addition
Nagrockiene, D., & Girskas, G. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.133 · Cited by 166
Properties and pozzolanic reactivity of flash calcined dredging sediments
Snellings, R., Cizer, Ö., Horckmans, L., Durdziński, P. T., Dierckx, P., Nielsen, P., Van Balen, K., & Vandewalle, L. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.04.019 · Cited by 163
Self-citationPozzolanic reactivity of a calcined interstratified illite/smectite (70/30) clay
Garg, N., & Skibsted, J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.08.006 · Cited by 159
Sulfate resistance of calcined clay – Limestone – Portland cements
Shi, Z., Ferreiro, S., Lothenbach, B., Geiker, M. R., Kunther, W., Kaufmann, J., Herfort, D., & Skibsted, J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.11.003 · Cited by 159
Newlands, K. C., Foss, M., Matchei, T., Skibsted, J., & Macphee, D. E. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14716 · Cited by 158
Liu, Q., Liu, J., & Qi, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.131 · Cited by 156
Palm, S., Proske, T., Rezvani, M., Hainer, S., Müller, C., & Graubner, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.009 · Cited by 152
Wang, Q., Shi, M., & Jun, Y. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.042 · Cited by 146
Fly ash as an assemblage of model Ca–Mg–Na-aluminosilicate glasses
Durdzinski, P., Snellings, R., Dunant, C. F., Haha, M. B., & Scrivener, K. L. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.08.005 · Cited by 145
Self-citationMachner, A., Zając, M., Haha, M. B., Kjellsen, K. O., Geiker, M. R., & WEERDT, K. D. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.11.007 · Cited by 139
Industrial trial to produce a low clinker, low carbon cement
Andrés, L. M. V., Berriel, S. S., Damas-Carrera, S., Pérez-Hernández, A., Scrivener, K. L., & Martirena-Hernández, J. F. (2015) · Materiales de Construcción · doi:10.3989/mc.2015.00614 · Cited by 137
Boddy, A., Hooton, R. D., & Gruber, K. A. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00492-6 · Cited by 136
Characterization of supplementary cementitious materials by thermal analysis
Bernal, S. A., Juenger, M. C. G., Ke, X., Matthes, W., Lothenbach, B., Belie, N. D., & Provis, J. L. (2016) · Materials and Structures · doi:10.1617/s11527-016-0909-2 · Cited by 135
Self-citationThe effect of glass composition on the reactivity of synthetic glasses
Schöler, A., Winnefeld, F., Haha, M. B., & Lothenbach, B. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14759 · Cited by 132
Effect of secondary copper slag as cementitious material in ultra-high performance mortar
Edwin, R. S., Schepper, M. D., Gruyaert, E., et al. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.007 · Cited by 127
Gong, K., & White, C. E. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.09.003 · Cited by 125
Kupwade‐Patil, K., Wolf, C. D., Chin, S., Ochsendorf, J., Hajiah, A. E., Al-Mumin, A. A., & Büyüköztürk, O. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.234 · Cited by 122
Evaluating the hydration of high volume fly ash mixtures using chemically inert fillers
la Varga, I. D., Castro, J., Bentz, D. P., Zunino, F., & Weiss, J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.132 · Cited by 119
Fernández, Á., Calvo, J. L. G., & Alonso, C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.12.016 · Cited by 115
Kumar, A., Oey, T., Falzone, G., Huang, J. Y., Bauchy, M., Balonis, M., Neithalath, N., Bullard, J. W., & Sant, G. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14859 · Cited by 113
Zając, M., Skoček, J., Adu-Amankwah, S., Black, L., & Haha, M. B. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.023 · Cited by 112
Geng, G., Myers, R. J., Yu, Y., et al. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.002 · Cited by 112
Zając, M., Durdzinski, P., Stabler, C., Skoček, J., Nied, D., & Haha, M. B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.01.008 · Cited by 110
Samimi, K., Kamali-Bernard, S., & Maghsoudi, A. A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.235 · Cited by 107
Surface Chemistry of Calcium Aluminosilicate Glasses
Snellings, R. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13263 · Cited by 102
Self-citationKhan, M. S. H., Kayali, O., & Troitzsch, U. (2016) · Materials and Structures · doi:10.1617/s11527-016-0810-z · Cited by 97
Machner, A., Zając, M., Haha, M. B., Kjellsen, K. O., Geiker, M. R., & WEERDT, K. D. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.02.013 · Cited by 92
The role of particle size on the performance of pumice as a supplementary cementitious material
Seraj, S., Cano, R., Ferron, R. D., & Juenger, M. C. G. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.03.009 · Cited by 91
Self-citationTran, V. Q., Soive, A., & Baroghel-Bouny, V. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.007 · Cited by 91
Influence of pozzolanic additives on hydration mechanisms of tricalcium silicate
Lapeyre, J., & Kumar, A. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.15518 · Cited by 88
Feng, Y. Q., Andertun, J. K., Yang, Q., Chen, Q., Engström, F., Samuelsson, C., & Qi, C. (2019) · Materials · doi:10.3390/ma12050772 · Cited by 85
Identifying Glass Compositions in Fly Ash
Aughenbaugh, K. L., Stutzman, P. E., & Juenger, M. C. G. (2016) · Frontiers in Materials · doi:10.3389/fmats.2016.00001 · Cited by 77
Self-citationFlash-calcined dredging sediment blended cements: effect on cement hydration and properties
Snellings, R., Horckmans, L., Bunderen, C. V., Vandewalle, L., & Çizer, Ö. (2017) · Materials and Structures · doi:10.1617/s11527-017-1108-5 · Cited by 77
Self-citationEdwin, R. S., Gruyaert, E., & Belie, N. D. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.08.036 · Cited by 75
Fly ash particle characterization for predicting concrete compressive strength
Kim, T., Davis, J. M., Ley, M. T., Kang, S., & Amrollahi, P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.059 · Cited by 74
Topological controls on the dissolution kinetics of glassy aluminosilicates
Oey, T., Kumar, A., Pignatelli, I., Yu, Y., Neithalath, N., Bullard, J. W., Bauchy, M., & Sant, G. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.15122 · Cited by 73
Concretes made of efficient multi-composite cements with slag and limestone
Proske, T., Rezvani, M., Palm, S., Müller, C., & Graubner, C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.02.012 · Cited by 72
Burris, L. E., & Juenger, M. C. G. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.09.008 · Cited by 70
Self-citationZunino, F., Bentz, D. P., & Castro, J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.018 · Cited by 70
New insights into the hydration of slag in alkaline media using a micro-reactor approach
Suraneni, P., Palacios, M., & Flatt, R. J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.09.015 · Cited by 62
Advances in 27Al MAS NMR Studies of Geopolymers
Brus, J., Abbrent, S., Kobera, L., Urbanová, M., & Čuba, P. (2016) · Annual reports on NMR spectroscopy · doi:10.1016/bs.arnmr.2015.11.001 · Cited by 61
Burris, L. E., & Juenger, M. C. G. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.08.007 · Cited by 60
Self-citationVolcano-related materials in concretes: a comprehensive review
Cai, G., Noguchi, T., Degée, H., Zhao, J., & Kitagaki, R. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-016-6161-z · Cited by 60
Hu, Q., Aboustait, M., Kim, T., Ley, M. T., Bullard, J. W., Scherer, G. W., Hanan, J. C., Rose, V., Winarski, R. P., & Gelb, J. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.07.008 · Cited by 57
Bentz, D. P., Jones, S. Z., Bentz, I. R., & Peltz, M. A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.167 · Cited by 57
Lv, Y., Ye, G., & Schutter, G. D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.001 · Cited by 57
Molecular structure of CaO–FeO x –SiO 2 glassy slags and resultant inorganic polymer binders
Peys, A., White, C. E., Olds, D., Rahier, H., Blanpain, B., & Pontikes, Y. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.15880 · Cited by 55
Rapid, Robust, and Relevant (R3) Reactivity Test for Supplementary Cementitious Materials
Snellings, R., Li, X., Avet, F., & Scrivener, K. L. (2019) · ACI Materials Journal · doi:10.14359/51716719 · Cited by 54
Self-citationPozzolanicity of finely ground lightweight aggregates
Suraneni, P., Fu, T., Azad, V. J., Isgor, O. B., & Weiss, J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.01.005 · Cited by 53
Physical and chemical characteristics of fly ash using automated scanning electron microscopy
Aboustait, M., Kim, T., Ley, M. T., & Davis, J. M. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.098 · Cited by 48
Skibsted, J., Pedersen, M. T., & Holzinger, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b11875 · Cited by 47
Performance of Ground-Glass Pozzolan as a Cementitious Material—A Review
Omran, A., Soliman, N., Zidol, A., et al. (2018) · Advances in Civil Engineering Materials · doi:10.1520/acem20170125 · Cited by 47
An examination of the reactivity of fly ash in cementitious pore solutions
Aughenbaugh, K. L., Chancey, R. T., Stutzman, P. E., Juenger, M. C. G., & Fowler, D. W. (2012) · Materials and Structures · doi:10.1617/s11527-012-9939-6 · Cited by 45
Self-citationPartial Replacement of Portland-Composite Cement by Fluidized Bed Combustion Fly Ash
Rissanen, J., Ohenoja, K., Kinnunen, P., & Illikainen, M. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001899 · Cited by 44
Effect of very high limestone content and quality on the sulfate resistance of blended cements
Baldermann, A., Rezvani, M., Proske, T., Grengg, C., Steindl, F. R., Sakoparnig, M., Baldermann, C., Galán, I., Emmerich, F., & Mittermayr, F. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.169 · Cited by 44
Jensen, M. M., WEERDT, K. D., Johannesson, B., & Geiker, M. R. (2015) · Computational Materials Science · doi:10.1016/j.commatsci.2015.04.023 · Cited by 41
高性能ゼオライト,シリカヒューム,及びPFAコンクリートの初期表面吸着及び塩化物拡散の比較研究
Chan, S. Y. N., & Xin, J. (1999) · Cited by 41
Risk of concrete carbonation with mineral industrial by-products
CZARNECKI, L., Woyciechowski, P., & Adamczewski, G. (2017) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-017-1623-5 · Cited by 40
The Charge-Balancing Role of Calcium and Alkali Ions in Per-Alkaline Aluminosilicate Glasses
Thomsen, R. M., Skibsted, J., & Yue, Y. (2018) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b12437 · Cited by 36
Kinnunen, P., Sreenivasan, H., Cheeseman, C. R., & Illikainen, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.123 · Cited by 35
Evaluation of Beneficiated and Reclaimed Fly Ashes in Concrete
Al-Shmaisani, S., Kalina, R. D., Ferron, R. D., & Juenger, M. C. G. (2019) · ACI Materials Journal · doi:10.14359/51716713 · Cited by 35
Self-citationMaterial Properties of Steel Slag-Cement Binding Materials Prepared by Precarbonated Steel Slag
Hou, J., Liu, Q., Liu, J., & Wu, Q. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002370 · Cited by 31
Is carbon dioxide pricing a driver in concrete mix design?
Black, L., & Purnell, P. (2015) · Magazine of Concrete Research · doi:10.1680/jmacr.15.00018 · Cited by 26
Jiang, B., Xiao, J., Huang, K. J., Hou, J., Jiao, S., & Zhu, H. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14613 · Cited by 25
Natali, M. E., White, C. E., & Bignozzi, M. C. (2016) · Fuel · doi:10.1016/j.fuel.2016.03.017 · Cited by 23
Rate controls on silicate dissolution in cementitious environments
Oey, T., Hsiao, Y.-H., Callagon, E. B. R., Wang, B., Pignatelli, I., Bauchy, M., & Sant, G. (2017) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2017.35 · Cited by 21
Pedersen, M. T., Jensen, F., & Skibsted, J. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b02497 · Cited by 20
Zhang, W., Na, S., Kim, J., Choi, H., & Hama, Y. (2017) · Materials and Structures · doi:10.1617/s11527-017-1039-1 · Cited by 18
Measurement and modeling needs for microstructure and reactivity of next-generation concrete binders
Bullard, J. W., Garboczi, E. J., Stutzman, P. E., Feng, P., Brand, A. S., Perry, L. N., Hagedorn, J. G., Griffin, W., & Terrill, J. E. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.06.012 · Cited by 18
Physical performances of alkali‐activated portland cement‐glass‐limestone blends
Thomsen, R. M., Ferreiro, S., Herfort, D., Skibsted, J., & Yue, Y. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14955 · Cited by 14
How SCMs Improve Concrete Durability – A Fundamental View
SINTEF Building and Infrastructure, N., & Justnes, H. (2016) · Sustainable construction materials and technologies · doi:10.18552/2016/scmt4kn4 · Cited by 14
Pyatina, T., Sugama, T., Ronne, A., & Trabits, G. (2017) · Advances in Cement Research · doi:10.1680/jadcr.16.00136 · Cited by 11
Research works printed but not linked: 50
- Kupwade-Patil, 2018, vol. 177, 547
- Kalina, 2019, False positives in ASTM C618 specifications for natural pozzolans, ACI Mater. J., 116, 165
- Dedeloudis, 2018, Natural pozzolans, 10.1007/978-3-319-70606-1_6 · doi:10.1007/978-3-319-70606-1_6
- 2012, vol. 232
- Diaz-Loya, 2019, Extending supplementary cementitious material resources: reclaimed and remediated fly ash and natural pozzolans, Cem. Concr. Compos., 101, 44, 10.1016/j.cemconcomp.2017.06.011 · doi:10.1016/j.cemconcomp.2017.06.011
- Ghafari, 2016, Feasibility of using natural SCMs in concrete for infrastructure applications, Constr. Build. Mater., 127, 724, 10.1016/j.conbuildmat.2016.10.070 · doi:10.1016/j.conbuildmat.2016.10.070
- Seraj, 2017, The role of particle size on the performance of pumice as a supplementary cementitious material, Cem. Concr. Compos., 80, 10.1016/j.cemconcomp.2017.03.009 · DOI
- Motahari Karein, 2018, Pretreatment of natural perlite powder by further milling to use as a supplementary cementitious material, Constr. Build. Mater., 186, 782, 10.1016/j.conbuildmat.2018.08.012 · doi:10.1016/j.conbuildmat.2018.08.012
- Páez-Flor, 2019, Microstructure-at-rest evolution and steady viscous flow behavior of fresh natural pozzolanic cement pastes, Constr. Build. Mater., 194, 360, 10.1016/j.conbuildmat.2018.11.009 · doi:10.1016/j.conbuildmat.2018.11.009
- Guynn, 2015, Maximizing SCM content of blended cements, IEEE Trans. Ind. Appl., 51, 4824, 10.1109/TIA.2015.2455029 · doi:10.1109/tia.2015.2455029
- Seraj, 2016, Calcining natural zeolites to improve their effect on cementitious mixture workability, Cem. Concr. Res., 85, 10.1016/j.cemconres.2016.04.002 · doi:10.1016/j.cemconres.2016.04.002
- Schulze, 2019, Suitability of natural calcined clays as supplementary cementitious material, Cem. Concr. Compos., 95, 92, 10.1016/j.cemconcomp.2018.07.006 · doi:10.1016/j.cemconcomp.2018.07.006
- Almenares, 2017, Industrial calcination of kaolinitic clays to make reactive pozzolans, Case Stud. Constr. Mater., 6, 225
- Krishnan, 2015, High level clinker replacement in ternary limestone-calcined clay-clinker cement, Vol. 3
- Kirsimäe, 2015, What shall we do with oil shale processing solid waste?, Oil Shale, 32, 201, 10.3176/oil.2015.3.01 · doi:10.3176/oil.2015.3.01
- Cordeiro, 2016, Improved pozzolanic activity of sugar cane bagasse ash by selective grinding and classification, Cem. Concr. Res., 89, 269, 10.1016/j.cemconres.2016.08.020 · doi:10.1016/j.cemconres.2016.08.020
- Bahurudeen, 2015, Influence of different processing methods on the pozzolanic performance of sugarcane bagasse ash, Cem. Concr. Compos., 56, 32, 10.1016/j.cemconcomp.2014.11.002 · doi:10.1016/j.cemconcomp.2014.11.002
- Wirth, 2019, Mineral phases and carbon content in weathered fly ashes, Fuel, 236, 1567, 10.1016/j.fuel.2018.09.106 · doi:10.1016/j.fuel.2018.09.106
- Shi, 2015, Preliminary investigation on the pozzolanic activity of superfine steel slag, Constr. Build. Mater., 82, 227, 10.1016/j.conbuildmat.2015.02.062 · doi:10.1016/j.conbuildmat.2015.02.062
- Kriskova, 2018, Transformation of stainless steel slag toward a reactive cementitious binder, J. Am. Ceram. Soc., 101, 1727, 10.1111/jace.15306 · doi:10.1111/jace.15306
- Rahman, 2017, Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag, Constr. Build. Mater., 140, 194, 10.1016/j.conbuildmat.2017.02.023 · doi:10.1016/j.conbuildmat.2017.02.023
- Saha, 2018, Value added utilization of by-product electric furnace ferronickel slag as construction materials: a review, Resour. Conserv. Recycl., 134, 10, 10.1016/j.resconrec.2018.02.034 · doi:10.1016/j.resconrec.2018.02.034
- Arvaniti, 2015, Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques, Mater. Struct. Constr., 48, 10.1617/s11527-014-0431-3 · doi:10.1617/s11527-014-0431-3
- Shoji, 2018, Classification of volcanic ash particles using a convolutional neural network and probability, Sci. Rep., 8, 10.1038/s41598-018-26200-2 · doi:10.1038/s41598-018-26200-2
- Li, 2018, Reactivity tests for supplementary cementitious materials: RILEM TC 267-TRM phase 1, Mater. Struct., 51, 10.1617/s11527-018-1269-x · doi:10.1617/s11527-018-1269-x
- McCarthy, 2017, Evaluation of fly ash reactivity potential using a lime consumption test, Mag. Concr. Res., 69, 954, 10.1680/jmacr.16.00505 · doi:10.1680/jmacr.16.00505
- Thorstensen, 2015, Inconsistencies in the pozzolanic strength activity index (SAI) for silica fume according to EN and ASTM, Mater. Struct., 48, 3979, 10.1617/s11527-014-0457-6 · doi:10.1617/s11527-014-0457-6
- Lindgård, 2012, Alkali–silica reactions (ASR): literature review on parameters influencing laboratory performance testing, Cem. Concr. Res., 42, 223, 10.1016/j.cemconres.2011.10.004 · doi:10.1016/j.cemconres.2011.10.004
- Hossain, 2004, Properties of volcanic pumice based cement and lightweight concrete, Cem. Concr. Res., 34, 283, 10.1016/j.cemconres.2003.08.004 · doi:10.1016/j.cemconres.2003.08.004
- Khoshroo, 2018, Effect of chloride treatment curing condition on the mechanical properties and durability of concrete containing zeolite and micro-nano-bubble water, Constr. Build. Mater., 177, 417, 10.1016/j.conbuildmat.2018.05.086 · doi:10.1016/j.conbuildmat.2018.05.086
- Samimi, 2017, Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes, Constr. Build. Mater., 151, 292, 10.1016/j.conbuildmat.2017.06.071 · doi:10.1016/j.conbuildmat.2017.06.071
- Kabay, 2015, Properties of concrete with pumice powder and fly ash as cement replacement materials, Constr. Build. Mater., 85, 1, 10.1016/j.conbuildmat.2015.03.026 · doi:10.1016/j.conbuildmat.2015.03.026
- Madani, 2018, The synergistic effect of pumice and silica fume on the durability and mechanical characteristics of eco-friendly concrete, Constr. Build. Mater., 174, 356, 10.1016/j.conbuildmat.2018.04.070 · doi:10.1016/j.conbuildmat.2018.04.070
- Ulusu, 2016, Investigation on characteristics of blended cements containing pumice, Constr. Build. Mater., 118, 11, 10.1016/j.conbuildmat.2016.05.030 · doi:10.1016/j.conbuildmat.2016.05.030
- Fernandes, 2007, The effect of clay content in sands used for cementitious materials in developing countries, Cem. Concr. Res., 37, 751, 10.1016/j.cemconres.2006.10.016 · doi:10.1016/j.cemconres.2006.10.016
- Muñoz, 2010, Detection of aggregate clay coatings and impacts on concrete, ACI Mater. J., 107, 387
- Langaroudi, 2018, Effect of nano-clay on workability, mechanical, and durability properties of self-consolidating concrete containing mineral admixtures, Constr. Build. Mater., 191, 619, 10.1016/j.conbuildmat.2018.10.044 · doi:10.1016/j.conbuildmat.2018.10.044
- Amar, 2018, Durability of a cementitious matrix based on treated sediments, Case Stud. Constr. Mater., 8, 258
- Safer, 2018, Valorization of dredged sediments as a component of vibrated concrete: durability of these concretes against sulfuric acid attack, Int. J. Concr. Struct. Mater., 12, 10.1186/s40069-018-0270-7 · doi:10.1186/s40069-018-0270-7
- Rahman, 2014, Thaumasite sulfate attack on concrete: mechanisms, influential factors and mitigation, Constr. Build. Mater., 73, 652, 10.1016/j.conbuildmat.2014.09.034 · doi:10.1016/j.conbuildmat.2014.09.034
- Barcelo, 2014, A modified ASTM C1012 procedure for qualifying blended cements containing limestone and SCMs for use in sulfate-rich environments, Cem. Concr. Res., 63, 75, 10.1016/j.cemconres.2014.05.007 · doi:10.1016/j.cemconres.2014.05.007
- Rezvani, 2019, Modelling the drying shrinkage of concrete made with limestone-rich cements, Cem. Concr. Res., 115, 160, 10.1016/j.cemconres.2018.09.003 · doi:10.1016/j.cemconres.2018.09.003
- Van Tittelboom, 2013, Test methods for resistance of concrete to sulfate attack–a critical review, 251
- Dhandapani, 2017, Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance, Cem. Concr. Compos., 84, 36, 10.1016/j.cemconcomp.2017.08.012 · doi:10.1016/j.cemconcomp.2017.08.012
- Mirvalad, 2015, Minimum SCM requirements in mixtures containing limestone cement to control thaumasite sulfate attack, Constr. Build. Mater., 84, 19, 10.1016/j.conbuildmat.2015.02.074 · doi:10.1016/j.conbuildmat.2015.02.074
- Adu-Amankwah, 2018, Relationship between cement composition and the freeze-thaw resistance of concretes, Adv. Cem. Res., 30, 387, 10.1680/jadcr.17.00138 · doi:10.1680/jadcr.17.00138
- Rajasekar, 2018, Durability characteristics of ultra high strength concrete with treated sugarcane bagasse ash, Constr. Build. Mater., 171, 350, 10.1016/j.conbuildmat.2018.03.140 · doi:10.1016/j.conbuildmat.2018.03.140
- Kazmi, 2017, Pozzolanic reaction of sugarcane bagasse ash and its role in controlling alkali silica reaction, Constr. Build. Mater., 148, 231, 10.1016/j.conbuildmat.2017.05.025 · doi:10.1016/j.conbuildmat.2017.05.025
- Idir, 2011, Pozzolanic properties of fine and coarse color-mixed glass cullet, Cem. Concr. Compos., 33, 19, 10.1016/j.cemconcomp.2010.09.013 · doi:10.1016/j.cemconcomp.2010.09.013
- Soive, 2018, The advantages of using a geochemical transport model including thermodynamic equilibrium, kinetic control and surface complexation to simulate the durability of concretes exposed to chlorides and sulphates, Eur. J. Environ. Civ. Eng., 1
Cited by
Reactivity of supplementary cementitious materials (SCMs) in cement blends
Skibsted, J., & Snellings, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105799 · Cited by 984
Self-citationFuture and emerging supplementary cementitious materials
Snellings, R., Suraneni, P., & Skibsted, J. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107199 · Cited by 606
Self-citationvon Greve-Dierfeld, S., Lothenbach, B., Vollpracht, A., Wu, B., Huet, B., Andrade, C., Medina, C., Thiel, C., Gruyaert, E., Vanoutrive, H., et al. (2020) · Materials and Structures · doi:10.1617/s11527-020-01558-w · Cited by 508
Self-citationAdvances in alkali-activation of clay minerals
Khalifa, A. Z., Cizer, Ö., Pontikes, Y., Heath, A., Patureau, P., Bernal, S. A., & Marsh, A. T. M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106050 · Cited by 436
Self-citationSmart materials and technologies for sustainable concrete construction
Nilimaa, J. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100177 · Cited by 387
Metadata
- Authors
- Juenger, M. C. G., Snellings, R., & Bernal, S. A.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 122
- Pages
- 257-273
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2945966691
- Cited by
- 1,260
- References
- 135
- Type
- supplementary materials
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Texas Department of Transportation (0-6717, 5-6717, 0-6966)
- Fonds voor Wetenschappelijk Onderzoek (30439691)
- Engineering and Physical Sciences Research Council (ECF EP/R001642/1)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.