The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Open accessAbstract
While interest in 3D printing of concrete (3DCP) and structures has been growing, a major obstacle for implementation of 3DP construction method is the need for steel reinforcement and the challenges this presents to the 3DP process. Engineered Cementitious Composites (ECC), also known as Strain-hardening Cement-based Composites (SHCC), hold promise to attain structural integrity, durability, reliability and robustness without steel reinforcement. This article surveys the state of the art on 3DP research with ECC and suggests needed research to direct future development. Research in Asia, Europe and the United States has demonstrated printability and buildability of 3DP-ECC that exhibits characteristic tensile ductility of cast ECC. Nonetheless, a number of outstanding research areas are identified, including those associated with more sustainable mix-design, rheology control, microstructure, filament/filament interface weakness, and long-term durability. Resolution of these challenges will better position the research community to addressing full scale construction, print speed, and print quality.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Self-citationGosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Self-citationWolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.02.017 · Cited by 836
Self-citationKazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Paul, S. C., Tay, Y. W. D., Panda, B., & Tan, M. J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2017.02.008 · Cited by 633
Yu, K.-Q., Yu, J.-T., Dai, J.-G., Lu, Z.-D., & Shah, S. P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.040 · Cited by 625
Self-citationWangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Self-citationNerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Self-citationMechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106037 · Cited by 598
Self-citationInvestigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102933 · Cited by 455
Self-citationRethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 385
Self-citationLi, V. C. (2019) · Springer eBooks · doi:10.1007/978-3-662-58438-5 · Cited by 352
Self-citationApplication of ECC for bridge deck link slabs
Lepech, M. D., & Li, V. C. (2009) · Materials and Structures · doi:10.1617/s11527-009-9544-5 · Cited by 343
Self-citationMechtcherine, V., Grafe, J., Nerella, V. N., Spaniol, E., Hertel, M., & Füssel, U. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.202 · Cited by 332
Self-citationA self-reinforced cementitious composite for building-scale 3D printing
Soltan, D. G., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.017 · Cited by 330
Self-citationNematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Self-citationZhu, B., Pan, J., Nematollahi, B., Zhou, Z., Zhang, Y., & Sanjayan, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108088 · Cited by 305
Self-citationRotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Yu, K.-Q., Zhu, W.-J., Ding, Y., Lu, Z.-D., Yu, J.-T., & Xiao, J.-Z. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105813 · Cited by 295
Self-citationNumerical modeling of the strand deposition flow in extrusion-based additive manufacturing
Comminal, R., Serdeczny, M. P., Pedersen, D. B., & Spangenberg, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.013 · Cited by 243
Ogura, H., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11081375 · Cited by 227
Self-citationDuctility of 3D printed concrete reinforced with short straight steel fibers
Bos, F. P., Bosco, E., & Salet, T. A. M. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1548069 · Cited by 222
Self-citationAn approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z. Y., Bos, D. H., Xu, Y., Salet, T. M., Çopuroğlu, O., Schlangen, E., & Bos, F. P. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107651 · Cited by 211
Self-citationKhoshnevis, B., & Dutton, R. (1998) · Materials Technology · doi:10.1080/10667857.1998.11752766 · Cited by 207 · cited 1×
“Although global adoption of the technology was initially slow after its invention by Khoshnevis [36] in the second half of the 1990s, it has seen rapid progress since around 2014, with a range of approaches being developed worldwide.”
BackgroundXia, M., Nematollahi, B., & Sanjayan, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.01.013 · Cited by 202
Zhu, Y., Yang, Y., & Yao, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.031 · Cited by 197
Characterization of sustainable bio-based mortar for concrete repair
Beltran, M. G. S., Jonkers, H. M., & Schlangen, E. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.012 · Cited by 189
Li, L., Cai, Z., Yu, K., Zhang, Y. X., & Ding, Y. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.01.001 · Cited by 187
Self-citationKruger, J., Cho, S., Zeranka, S., Viljoen, C., & van Zijl, G. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107660 · Cited by 158
Self-citationDirect Tensile Properties and Stress–Strain Model of UHP-ECC
Yu, K., Lu, Z.-D., Dai, J., & Shah, S. P. (2019) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002975 · Cited by 155
Self-citationDurability of strain-hardening cement-based composites (SHCC)
van Zijl, G. P. A. G., Wittmann, F. H., Oh, B. H., Kabele, P., Filho, R. D. T., Fairbairn, E. D. M. R., Slowik, V., Ogawa, A., Hoshiro, H., Mechtcherine, V., et al. (2012) · Materials and Structures · doi:10.1617/s11527-012-9845-y · Cited by 124
Self-citationDesign of Green Engineered Cementitious Composites for Improved Sustainability
Lepech, M. D., Li, V. C., Robertson, R. E., & Keoleian, G. A. (2008) · ACI Materials Journal · doi:10.14359/20198 · Cited by 120
Self-citationLorenzoni, R., Curoșu, I., Paciornik, S., Mechtcherine, V., Oppermann, M., & Silva, F. D. A. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103551 · Cited by 100
Self-citationKetel, S., Falzone, G., Wang, B., Washburn, N. R., & Sant, G. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.022 · Cited by 73
Bao, Y., Xu, M., Soltan, D. G., Xia, T., Shih, A. J., Clack, H. L., & Li, V. C. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_11 · Cited by 56
Self-citationLarge Scale Testing of Digitally Fabricated Concrete (DFC) Elements
Bos, F. P., Wolfs, R. J. M., Ahmed, Z., & Salet, T. A. M. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_12 · Cited by 51
Self-citationYu, J., & Leung, C. K. Y. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_24 · Cited by 43
Cited by
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
Self-citationExtrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Huang, B.-T., Wu, J.-Q., Yu, J., Dai, J.-G., Leung, C. K. Y., & Li, V. C. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106292 · Cited by 364
Self-citationSustainable materials for 3D concrete printing
Bhattacherjee, S., Basavaraj, A. S., Rahul, A. V., Santhanam, M., Gettu, R., Panda, B., Schlangen, E., Chen, Y., Copuroglu, O., Ma, G., et al. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104156 · Cited by 321
Self-citationLao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J.-G., & Shah, S. P. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 281
Metadata
- Authors
- Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., van Zijl, G. P. A. G., & Kruger, P. J.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 132
- Pages
- 106038
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3015474481
- Cited by
- 342
- References
- 41
- FWCI
- 20.83
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.