The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Tetracycline adsorption onto activated carbons produced by KOH activation of tyre pyrolysis char
Open accessAbstract
Tyre pyrolysis char (TPC), produced when manufacturing pyrolysis oil from waste tyre, was used as raw material to prepare activated carbons (ACs) by KOH activation. KOH to TPC weight ratios (W) between 0.5 and 6, and activation temperatures from 600 to 800 °C, were used. An increase in W resulted in a more efficient development of surface area, microporosity and mesoporosity. Thus, ACs derived from TPC (TPC-ACs) with specific surface areas up to 814 m(2) g(-1) were obtained. TPC, TPC-ACs and a commercial AC (CAC) were tested for removing Tetracycline (TC) in aqueous phase, and systematic adsorption studies, including equilibrium, kinetics and thermodynamic aspects, were performed. Kinetics was well described by the pseudo-first order model for TPC, and by a pseudo second-order kinetic model for ACs. TC adsorption equilibrium data were also fitted by different isotherm models: Langmuir, Freundlich, Sips, Dubinin-Radushkevich, Dubinin-Astokov, Temkin, Redlich-Peterson, Radke-Prausnitz and Toth. The thermodynamic study confirmed that TC adsorption onto TPC-ACs is a spontaneous process. TC adsorption data obtained in the present study were compared with those reported in the literature, and differences were explained in terms of textural properties and surface functionalities. TPC-ACs had similar performances to those of commercial ACs, and might significantly improve the economic balance of the production of pyrolysis oil from waste tyres.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Antibiotics in the aquatic environment – A review – Part I
Kümmerer, K. (2009) · Chemosphere · doi:10.1016/j.chemosphere.2008.11.086 · Cited by 4,475
Michael, I., Rizzo, L., McArdell, C. S., Manaia, C. M., Merlin, C., Schwartz, T., Dagot, C., & Fatta-Kassinos, D. (2013) · Water Research · doi:10.1016/j.watres.2012.11.027 · Cited by 2,013
Progress in used tyres management in the European Union: A review
Sienkiewicz, M., Kucinska-Lipka, J., Janik, H., & Balas, A. (2012) · Waste Management · doi:10.1016/j.wasman.2012.05.010 · Cited by 559
Kovalova, L., Siegrist, H., Singer, H., Wittmer, A., & McArdell, C. S. (2012) · Environmental Science & Technology · doi:10.1021/es203495d · Cited by 495
Dirany, A., Sirés, I., Oturan, N., Özcan, A., & Oturan, M. A. (2012) · Environmental Science & Technology · doi:10.1021/es204621q · Cited by 424
Removal of antibiotics by coagulation and granular activated carbon filtration
Choi, K.-J., Kim, S.-G., & Kim, S.-H. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.05.059 · Cited by 353
Liao, P., Zhan, Z., Dai, J., Wu, X., Zhang, W., Wang, K., & Yuan, S. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.118 · Cited by 342
Rivera-Utrilla, J., Gómez-Pacheco, C. V., Sánchez-Polo, M., López-Peñalver, J. J., & Ocampo-Pérez, R. (2013) · Journal of Environmental Management · doi:10.1016/j.jenvman.2013.09.024 · Cited by 333
Ji, L., Wan, Y., Zheng, S., & Zhu, D. (2011) · Environmental Science & Technology · doi:10.1021/es200483b · Cited by 316
Basta, A. H., Fierro, V., El-Saied, H., & Celzard, A. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.02.028 · Cited by 312
Self-citationA novel porous carbon derived from hydrothermal carbon for efficient adsorption of tetracycline
Zhu, X., Liu, Y., Zhou, C., Luo, G., Zhang, S., & Chen, J. (2014) · Carbon · doi:10.1016/j.carbon.2014.05.067 · Cited by 306
Sorptive removal of tetracycline from water by palygorskite
Chang, P.-H., Li, Z., Yu, T.-L., Munkhbayer, S., Kuo, T.-H., Hung, Y.-C., Jean, J.-S., & Lin, K.-H. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.09.113 · Cited by 295
Preparation and characterization of mesoporous activated carbon from waste tires
Ariyadejwanich, P., Tanthapanichakoon, W., Nakagawa, K., Mukai, S. R., & Tamon, H. (2003) · Carbon · doi:10.1016/s0008-6223(02)00267-1 · Cited by 256
ROFIQULISLAM, M., HANIU, H., & RAFIQULALAMBEG, M. (2008) · Fuel · doi:10.1016/j.fuel.2008.04.036 · Cited by 234
Girods, P., Dufour, A., Fierro, V., Rogaume, Y., Rogaume, C., Zoulalian, A., & Celzard, A. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.11.047 · Cited by 226
Self-citationCharacterization and potential applications of pyrolytic char from ablative pyrolysis of used tires
Helleur, R., Popovic, N., Ikura, M., Stanciulescu, M., & Liu, D. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00207-2 · Cited by 224
Jagiello, J., & Olivier, J. P. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9082147 · Cited by 196
Zhang, D., Yin, J., Zhao, J., Zhu, H., & Wang, C. (2015) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2015.05.014 · Cited by 194
Kinetic study of tetracycline adsorption on sludge-derived adsorbents in aqueous phase
Ocampo-Pérez, R., Rivera-Utrilla, J., Gómez-Pacheco, C., Sánchez-Polo, M., & López-Peñalver, J. J. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.09.072 · Cited by 188
Yu, F., Ma, J., & Han, S. (2014) · Scientific Reports · doi:10.1038/srep05326 · Cited by 188
Liu, H., Liu, W., Zhang, J., Zhang, C., Ren, L., & Li, Y. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.10.081 · Cited by 184
Pyrolysis of a waste from the grinding of scrap tyres
Fernández, A. M., Barriocanal, C., & Álvarez, R. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.12.014 · Cited by 176
Mesoporous carbons from waste tire char and their application in wastewater discoloration
Lin, Y.-R., & Teng, H. (2002) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(02)00380-3 · Cited by 163
Rice straw as precursor of activated carbons: Activation with ortho-phosphoric acid
Fierro, V., Muñiz, G., Basta, A. H., El‐Saied, H., & Celzard, A. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.04.062 · Cited by 155
Self-citationProduction of activated carbon by waste tire thermochemical degradation with CO2
Betancur, M., Martínez, J. D., & Murillo, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.02.167 · Cited by 137
Sun, Y., Yue, Q., Gao, B., Li, Q., Huang, L., Yao, F., & Xu, X. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.10.067 · Cited by 134
Solubility-normalized Dubinin–Astakhov adsorption isotherm for ion-exchange systems
Inglezakis, V. J. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.01.039 · Cited by 112
Lian, F., Song, Z., Liu, Z., Zhu, L. Y., & Xing, B. (2013) · Environmental Pollution · doi:10.1016/j.envpol.2013.03.014 · Cited by 111
Thermal treatments of activated carbon fibres using a microwave furnace
Carrott, P. J. M., Nabais, J. M. V., Carrott, M. M. L. R., & Menéndez, J. Á. (2001) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(01)00384-5 · Cited by 108
Production of Activated Carbons from Pyrolysis of Waste Tires Impregnated with Potassium Hydroxide
Teng, H., Lin, Y., & Hsu, L.-Y. (2000) · Journal of the Air & Waste Management Association · doi:10.1080/10473289.2000.10464221 · Cited by 106
Kang, J. K., Liu, H., Zheng, Y., Qu, J., & Chen, J. P. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.10.065 · Cited by 91
Sorption study of toluene and xylene in aqueous solutions by recycled tires crumb rubber
Alamo-Nole, L., Perales-Pérez, Ó., & Román, F. R. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.09.003 · Cited by 88
Preparation and characterisation of demineralised tyre derived activated carbon
Chan, O. S., Cheung, W. H., & McKay, G. (2011) · Carbon · doi:10.1016/j.carbon.2011.06.065 · Cited by 86
Mesoporous activated carbon from waste tyre rubber for dye removal from effluents
Mui, E. L. K., Cheung, W. H., Valix, M., & McKay, G. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.11.022 · Cited by 82
Basta, A. H., Fierro, V., Saied, H. E., & Celzard, A. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.043 · Cited by 78
Self-citationThe leaching of inorganic species from activated carbons produced from waste tyre rubber
Miguel, G. S., Fowler, G. D., & Sollars, C. J. (2002) · Water Research · doi:10.1016/s0043-1354(01)00422-5 · Cited by 77
Porosity and surface characteristics of activated carbons produced from waste tyre rubber
Miguel, G. S., Fowler, G. D., Dall'Orso, M., et al. (2001) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.518 · Cited by 73
Effect of solution pH on the removal of clofibric acid by cork-based activated carbons
Mestre, A. S., Pinto, M. L., Pires, J., Nogueira, J. M. F., & Carvalho, A. P. (2009) · Carbon · doi:10.1016/j.carbon.2009.11.013 · Cited by 67
Erşan, M., Bağda, E., & Bağda, E. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.11.034 · Cited by 61
Dye adsorption onto activated carbons from tyre rubber waste using surface coverage analysis
Mui, E. L. K., Cheung, W. H., Valix, M., & McKay, G. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.03.061 · Cited by 59
Xu, L., Pan, J., Pan, J., Li, X., Huo, P., Yan, Y., Zou, X., & Zhang, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.09.003 · Cited by 58
Sun, Y., Yue, Q., Gao, B., Wang, Y., Gao, Y., & Li, Q. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.07.029 · Cited by 53
Acosta, R., Ruiz, C. P. T., Gauthier‐Maradei, P., & Nabarlatz, D. (2015) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2014-0137 · Cited by 30
Self-citation
Cited by
Methods for preparation and activation of activated carbon: a review
Heidarinejad, Z., Dehghani, M. H., Heidari, M., Javedan, G., Ali, I., & Sillanpää, M. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00955-0 · Cited by 1,475
Xu, L., Zhang, H., Xiong, P., Zhu, Q., Liao, C., & Jiang, G. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141975 · Cited by 1,206
Conventional and emerging technologies for removal of antibiotics from wastewater
Phoon, B. L., Ong, C. C., Mohamed Saheed, M. S., Show, P.-L., Chang, J.-S., Ling, T. C., Lam, S. S., & Juan, J. C. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122961 · Cited by 810
Zhang, P., Li, Y., Cao, Y., & Han, L. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121348 · Cited by 449
Shahrokhi-Shahraki, R., Benally, C., El-Din, M. G., & Park, J. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2020.128455 · Cited by 428
Metadata
- Authors
- Acosta, R., Fierro, V., Martinez de Yuso, A., Nabarlatz, D., & Celzard, A.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2016-04
- Volume
- 149
- Pages
- 168-176
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W2269472087
- Cited by
- 323
- References
- 45
- FWCI
- 19.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.