The DOI matches its Crossref record; 115 of the 115 references it cites were found in a registry or an index.
Design for additive manufacturing: Framework and methodology
Open accessAbstract
In recent decades additive manufacturing (AM) has evolved from a prototyping to a production technology. It is used to produce end-use-parts for medical, aerospace, automotive and other industrial applications from small series up to 100,000 of commercially successful products. Metal additive manufacturing processes are relatively slow, require complex preparation and post-processing treatment while using expensive machinery, resulting in high production costs per product. Design for Additive Manufacturing (DfAM) aims at optimizing the product design to deal with the complexity of the production processes, while also defining decisive benefits of the AM based product in the usage stages of its life cycle. Recent investigations have shown that the lack of knowledge on DfAM tools and techniques are seen as one of the barriers for the further implementation of AM. This paper presents a framework for DfAM methods and tools, subdivided into three distinct stages of product development: AM process selection, product redesign for functionality enhancement, and product optimization for the AM process chosen. It will illustrate the applicability of the design framework using examples from both research and industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Topology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Self-citationProduct design for manufacture and assembly
Boothroyd, G. (1994) · Computer-Aided Design · doi:10.1016/0010-4485(94)90082-5 · Cited by 1,726
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Brunette, D. M., Tengvall, P., Textor, M., & Thomsen, P. (2001) · Engineering Materials · doi:10.1007/978-3-642-56486-4 · Cited by 1,547
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Fabricated: The New World of 3D Printing
Lipson, H., & Kurman, M. (2013) · Cited by 1,032
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Processing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
Tancogne-Dejean, T., Spierings, A. B., & Mohr, D. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.054 · Cited by 806
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
The cost of additive manufacturing: machine productivity, economies of scale and technology-push
Baumers, M., Dickens, P., Tuck, C., & Hague, R. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.02.015 · Cited by 658
Material Incress Manufacturing by Rapid Prototyping Techniques
Kruth, J. P. (1991) · CIRP Annals · doi:10.1016/s0007-8506(07)61136-6 · Cited by 657
Product Design for Manufacture and Assembly
Boothroyd, G., Dewhurst, P., & Knight, W. A. (2010) · CRC Press eBooks · doi:10.1201/9781420089288 · Cited by 655
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
Laser based additive manufacturing in industry and academia
Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., & Levy, G. N. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.011 · Cited by 602
Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
Wu, J., Aage, N., Westermann, R., & Sigmund, O. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2655523 · Cited by 572
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Ziętala, M., Durejko, T., Polański, M., Kunce, I., Płociński, T., Zieliński, W., Łazińska, M., Stępniowski, W. J., Czujko, T., Kurzydłowski, K. J., et al. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.09.028 · Cited by 523
Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.008 · Cited by 489
Wang, M. Y., & Wang, X. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2003.10.008 · Cited by 488
Design and properties of 3D scaffolds for bone tissue engineering
Gómez, S., Vlad, M. D., López, J., & Fernández, E. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.032 · Cited by 477
Gaynor, A. T., & Guest, J. K. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1551-x · Cited by 476
An overview of functionally graded additive manufacturing
Loh, G. H., Pei, E., Harrison, D., & Monzón, M. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.023 · Cited by 459
Bridging topology optimization and additive manufacturing
Zegard, T., & Paulino, G. H. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1274-4 · Cited by 457
Deep Generative Design: Integration of Topology Optimization and Generative Models
Oh, S., Jung, Y., Kim, S., Lee, I., & Kang, N. (2019) · Journal of Mechanical Design · doi:10.1115/1.4044229 · Cited by 449
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel
Lu, J., Luo, K., Zhang, Y. K., Sun, G., Gu, Y. Y., Zhou, J., Ren, X., Zhang, X. C., Zhang, L. F., Chen, K. M., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.06.010 · Cited by 426
Self-citationKlocke, F., Klink, A., Veselovac, D., Aspinwall, D. K., Soo, S. L., Schmidt, M., Schilp, J., Levy, G., & Kruth, J.-P. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.004 · Cited by 417 · cited 1×
“98,108,147], AM materials [27], speci fi c AM application areas [17,95] and AM geometrical aspects [105].”
BackgroundGuo, P., Zou, B., Huang, C., & Gao, H. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.09.005 · Cited by 413
Leary, M., Merli, L., Torti, F., Mazur, M., & Brandt, M. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.015 · Cited by 406
Topology optimization of 3D self-supporting structures for additive manufacturing
Langelaar, M. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.010 · Cited by 405
Kumbhar, N. N., & Mulay, A. V. (2018) · Journal of The Institution of Engineers (India): Series C · doi:10.1007/s40032-016-0340-z · Cited by 375
Topology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
Biomedical production of implants by additive electro-chemical and physical processes
Bartolo, P., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Ciurana, J., & Leu, M. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.005 · Cited by 321
Support structure constrained topology optimization for additive manufacturing
Mirzendehdel, A. M., & Suresh, K. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.08.006 · Cited by 318
Towards an integrated generative design framework
Singh, V., & Gu, N. (2012) · Design Studies · doi:10.1016/j.destud.2011.06.001 · Cited by 317
Cheng, L., Bai, J., & To, A. C. (2019) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.10.010 · Cited by 306
Porous scaffold design using the distance field and triply periodic minimal surface models
Yoo, D. J. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.019 · Cited by 298
Geometrical metrology for metal additive manufacturing
Leach, R. K., Bourell, D., Carmignato, S., Donmez, A., Senin, N., & Dewulf, W. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.05.004 · Cited by 289
Vogiatzis, P., Chen, S., Wang, X., Li, T., & Wang, L. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.09.009 · Cited by 275
Gaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028439 · Cited by 271
Microstructure modelling for metallic additive manufacturing: a review
Tan, J. H. K., Sing, S. L., & Yeong, W. Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1677345 · Cited by 266
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
A new method of structural shape optimization based on biological growth
Mattheck, C., & Burkhardt, S. (1990) · International Journal of Fatigue · doi:10.1016/0142-1123(90)90094-u · Cited by 246
Design for manufacturability handbook
(1999) · Journal of Manufacturing Systems · doi:10.1016/s0278-6125(99)90099-7 · Cited by 245
The barriers to the progression of additive manufacture: Perspectives from UK industry
Thomas-Seale, L. E. J., Kirkman-Brown, J. C., Attallah, M. M., Espino, D. M., & Shepherd, D. E. T. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.02.003 · Cited by 235
Cheng, L., Zhang, P., Biyikli, E., Bai, J., Robbins, J., & To, A. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2016-0069 · Cited by 229
Yap, Y. L., Wang, C., Sing, S. L., Dikshit, V., Yeong, W. Y., & Wei, J. (2017) · Precision Engineering · doi:10.1016/j.precisioneng.2017.05.015 · Cited by 228
(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing
Schmelzle, J., Kline, E. V., Dickman, C. J., Reutzel, E. W., Jones, G., & Simpson, T. W. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031156 · Cited by 220
Structural optimization under overhang constraints imposed by additive manufacturing technologies
Allaire, G., Dapogny, C., Estevez, R., Faure, A., & Michailidis, G. (2017) · Journal of Computational Physics · doi:10.1016/j.jcp.2017.09.041 · Cited by 212
The development of design rules for selective laser melting
Thomas, D. (2009) · Cardiff Metropolitan Research Repository (Cardiff Metropolitan University) · doi:10.25401/cardiffmet.20974597 · Cited by 211
A new part consolidation method to embrace the design freedom of additive manufacturing
Yang, S., Tang, Y., & Zhao, Y. F. (2015) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.06.024 · Cited by 204
Yap, Y. L., & Yeong, W. Y. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.938993 · Cited by 204
Tang, Y., Kurtz, A., & Zhao, Y. F. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.06.001 · Cited by 198
Build orientation optimization for multi-part production in additive manufacturing
Zhang, Y., Bernard, A., Harik, R., & Karunakaran, K. P. (2017) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-015-1057-1 · Cited by 193
Self-citationPorous scaffold design by solid T-splines and triply periodic minimal surfaces
Feng, J., Fu, J., Shang, C., Lin, Z., & Li, B. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.03.007 · Cited by 184
Impact Mechanics and High-Energy Absorbing Materials: Review
Qiao, P., Yang, M., & Bobaru, F. (2008) · Journal of Aerospace Engineering · doi:10.1061/(asce)0893-1321(2008)21:4(235 · Cited by 182
Tolerancing: Managing uncertainty from conceptual design to final product
Morse, E., Dantan, J.-Y., Anwer, N., Söderberg, R., Moroni, G., Qureshi, A., Jiang, X., & Mathieu, L. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.05.009 · Cited by 182
Self-citationTransparency Built‐in: Energy Consumption and Cost Estimation for Additive Manufacturing
Baumers, M., Tuck, C., Wildman, R., Ashcroft, I., Rosamond, E., & Hague, R. (2013) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2012.00512.x · Cited by 177
History of Additive ManufacturingPreprint
Wohlers, T. T., Gornet, T. J., Mostow, N., Campbell, I. M., Diegel, O., Kowen, J., Huff, R., Stucker, B. E., Fidan, I., Doukas, A., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4474824 · Cited by 164
Lindermann, C., Jahnke, U., Moi, M., & Koch, R. (2012) · doi:10.26153/tsw/15341 · Cited by 160
Chekurov, S., Metsä-Kortelainen, S., Salmi, M., Roda, I., & Jussila, A. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.09.008 · Cited by 159
Characterization of Effect of Support Structures in Laser Additive Manufacturing of Stainless Steel
Järvinen, J.-P., Matilainen, V., Li, X., Piili, H., Salminen, A., Mäkelä, I., & Nyrhilä, O. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.099 · Cited by 142
Cheng, L., Liu, J., Liang, X. Y., & To, A. C. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.12.024 · Cited by 141
3D and multiple load case bi-directional evolutionary structural optimization (BESO)
Young, V., Querin, O. M., Steven, G. P., & Xie, Y. M. (1999) · Structural and Multidisciplinary Optimization · doi:10.1007/bf01195993 · Cited by 135
Liu, J., & To, A. C. (2017) · Computer-Aided Design · doi:10.1016/j.cad.2017.05.003 · Cited by 135
Arie, M., Shooshtari, A. H., & Ohadi, M. M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.09.140 · Cited by 135
Amato, K. N. (2012) · Journal of Materials Science Research · doi:10.5539/jmsr.v1n2p3 · Cited by 128
New paradigms in hierarchical porous scaffold design for tissue engineering
Yoo, D.-J. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.12.092 · Cited by 124
Generative Design: A Paradigm for Design Research.
McCormack, J., Dorin, A., & Innocent, T. (2004) · Proceedings of DRS · doi:10.21606/drs.2004.101 · Cited by 123
Implicit slicing for functionally tailored additive manufacturing
Steuben, J. C., Iliopoulos, A., & Michopoulos, J. G. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.04.003 · Cited by 123
Topology Optimization for Additive Manufacturing: Considering Maximum Overhang Constraint
Gaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K. (2014) · AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO) · doi:10.2514/6.2014-2036 · Cited by 118
A multi-resolution method for 3D multi-material topology optimization
Park, J., & Sutradhar, A. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.10.011 · Cited by 114
Concurrent deposition path planning and structural topology optimization for additive manufacturing
Liu, J., & Yu, H. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0087 · Cited by 113
Development of an additive manufacturing-enabled compact manifold microchannel heat exchanger
Tiwari, R., Andhare, R. S., Shooshtari, A. H., & Ohadi, M. M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.122 · Cited by 113
Liu, S., Li, Q., Liu, J., Chen, W., & Zhang, Y. (2018) · Engineering · doi:10.1016/j.eng.2017.09.002 · Cited by 110
Self-citationRobbins, J., Owen, S. J., Clark, B. W., & Voth, T. E. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.013 · Cited by 108
Additive manufacturing of non-assembly mechanisms
Cuellar, J. S., Smit, G., Plettenburg, D. H., & ZADPOOR, A. A. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.004 · Cited by 108
Xia, Q., & Shi, T. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.07.015 · Cited by 106
Yi, L., Gläßner, C., & Aurich, J. C. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.09.007 · Cited by 105
Part decomposition and assembly-based (Re) design for additive manufacturing: A review
Oh, Y., Zhou, C., & Behdad, S. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.018 · Cited by 102
Mass, Y., & Amir, O. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.001 · Cited by 88
On the fatigue behavior of additive manufactured lattice structures
Zargarian, A., Esfahanian, M., Kadkhodapour, J., Ziaei-Rad, S., & Zamani, D. (2019) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2019.01.012 · Cited by 86
Bournias-Varotsis, A., Friel, R. J., Harris, R. A., & Engstrøm, D. S. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.03.027 · Cited by 77
Shuai, C., Xue, L., Gao, C., Yang, Y., Peng, S., & Zhang, Y. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1458991 · Cited by 76
Self-citationMicro additive manufacturing using ultra short laser pulses
Veld, B. H. I. ‘., Overmeyer, L., Schmidt, M., Wegener, K., Malshe, A. P., & Bártolo, P. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.007 · Cited by 73
Evaluating the Design for Additive Manufacturing: A Process Planning Perspective
Zhang, Y., Bernard, A., Gupta, R. K., & Harik, R. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.03.179 · Cited by 70
Self-citationGÖRGÜLÜARSLAN, R. M., Gandhi, U. N., Song, Y., & Choi, S.-K. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2015-0139 · Cited by 69
Combined Build-Time, Energy Consumption and Cost Estimation for Direct Metal Laser Sintering
Baumers, M., Tuck, C. J., Wildman, R. D., et al. (2012) · doi:10.26153/tsw/15401 · Cited by 66
Additive Manufacturing – Developments in Training and Education
Pei, E., Monzón, M., & Bernard, A. L. (2018) · Springer eBooks · doi:10.1007/978-3-319-76084-1 · Cited by 65
Self-citationA statistical method for build orientation determination in additive manufacturing
Zhang, Y., Harik, R., Fadel, G., & Bernard, A. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2018-0102 · Cited by 63
Self-citationFunctionality-based Part Orientation for Additive Manufacturing
Moroni, G., Syam, W. P., & Petrò, S. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.01.015 · Cited by 54
Self-citationThe Role of Design for Additive Manufacturing in the Successful Economical Introduction of AM
Vaneker, T. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.02.012 · Cited by 52
Self-citationDesign optimisation for an additively manufactured automotive component
Abdi, M., Ashcroft, I., & Wildman, R. D. (2017) · International Journal of Powertrains · doi:10.1504/ijpt.2018.090371 · Cited by 51
Shape optimization of a layer by layer mechanical constraint for additive manufacturing
Allaire, G., Dapogny, C., Faure, A., & Michailidis, G. (2017) · Comptes Rendus Mathématique · doi:10.1016/j.crma.2017.04.008 · Cited by 48
A decision support method for evaluation and process selection of Additive Manufacturing
Bikas, H., Koutsoukos, S., & Stavropoulos, P. G. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.261 · Cited by 45
Selective Laser Melting of a 1U CubeSat structure. Design for Additive Manufacturing and assembly
Boschetto, A., Bottini, L., Eugeni, M., Cardini, V., Nisi, G. G., Veniali, F., & Gaudenzi, P. (2019) · Acta Astronautica · doi:10.1016/j.actaastro.2019.03.041 · Cited by 44
Design for 4D printing: rapidly exploring the design space around smart materials
Sossou, G., Demoly, F., Montavon, G., & Gomes, S. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.02.032 · Cited by 39
Explicit control of structural complexity in topology optimization
Zhang, W., Liu, Y., Wei, P., Zhu, Y., & Guo, X. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.026 · Cited by 37
A numerical-based part consolidation candidate detection approach with modularization considerations
Yang, S. L., Santoro, F., Sulthan, M. A., & Zhao, Y. F. (2018) · Research in Engineering Design · doi:10.1007/s00163-018-0298-3 · Cited by 34
Customization and topology optimization of compression casts/braces on two-manifold surfaces
Zhang, Y., & Kwok, T.-H. (2019) · Computer-Aided Design · doi:10.1016/j.cad.2019.02.005 · Cited by 34
Self-citationFunctionally Graded Structures through Building Manufacturing
Craveiro, F. G. D. S., Bártolo, H. M. C. D. R. T. G., & Bártolo, P. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.683.775 · Cited by 27
3D and multiple load case bi-directional evolutionary structural optimization (BESO)
Young, V., Querin, O. M., Steven, G. P., & Xie, Y. M. (1999) · Structural Optimization · doi:10.1007/s001580050119 · Cited by 21
Method for integration of lattice structures in design for additive manufacturing
Azman, A. H. (2017) · theses.fr (ABES) · doi:10.70675/c38cfa6fz389cz4d10z869az8990ab2de32e · Cited by 18
Process Monitoring of 3D Metal Printing in Industrial Scale
Amini, M., & Chang, S. I. (2018) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2018-6332 · Cited by 18
An origami-based design approach to self-reconfigurable structures using 4D printing technology
Jian, B., Demoly, F., Zhang, Y., & Gomes, S. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.04.184 · Cited by 18
Self-citationZhang, Y., Wang, W., & Bernard, A. L. (2016) · HAL (Le Centre pour la Communication Scientifique Directe) · Cited by 16
Self-citationCorrelation Between Conditional Approval and Customized Bone Implant Devices
Guo, X., Liu, B., & Lu, Z. (2019) · Orthopaedic Surgery · doi:10.1111/os.12415 · Cited by 4
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Additive manufacturing of heat exchangers in aerospace applications: a review
Careri, F., Khan, R. H. U., Todd, C., & Attallah, M. M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121387 · Cited by 320
3D Printing for Repair: An Approach for Enhancing Repair
van Oudheusden, A. V., Bolaños Arriola, J. B., Faludi, J., Flipsen, B., & Balkenende, R. (2023) · Sustainability · doi:10.3390/su15065168 · Cited by 17
Metadata
- Authors
- Vaneker, T., Bernard, A., Moroni, G., Gibson, I., & Zhang, Y.
- Venue
- CIRP Annals
- Publisher
- Elsevier BV
- Published
- 2020
- Volume
- 69
- Issue
- 2
- Pages
- 578-599
- ISSN
- 0007-8506 (ISSN-L)
- OpenAlex
- W3047477704
- Cited by
- 289
- References
- 115
- FWCI
- 15.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.