The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Building a digital twin for additive manufacturing through the exploitation of blockchain: A case analysis of the aircraft industry
Abstract
Abstract Blockchain is becoming a widespread digital technology that allows every transaction to be tracked in an inviolable way, hence making it possible to go back through the entire history of products and product components. Its idiosyncratic characteristics can be especially useful in the aircraft industry, a highly technologically-based sector, wherein manufacturers of components are governed by stringent technical standards, the aim of which is to certify and monitor the whole component production process. In addition, the sector makes significant use of additive manufacturing technologies to perform the rapid prototyping of product components, realized through the supply chain, hence reducing time-to-market, while ensuring quality and containing costs. Starting from these premises, the paper focuses on the phases characterizing the metal additive manufacturing process, in which a component for the aircraft industry can be produced and proposes a digital twin for additive manufacturing in the aircraft industry through the exploitation of Blockchain solutions. In doing so, the paper provides a conceptual answer to securing and organizing the data generated through an end-to-end additive manufacturing process in the aircraft industry and underlines how companies exploiting Blockchain can build secure and connected manufacturing infrastructure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Blockchain technology and its relationships to sustainable supply chain management
Saberi, S., Kouhizadeh, M., Sarkis, J., & Shen, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1533261 · Cited by 4,118
(2015) · Cited by 3,471
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Organizing for Innovation in the Digitized World
Yoo, Y., Boland, R. J., Lyytinen, K., & Majchrzak, A. (2012) · Organization Science · doi:10.1287/orsc.1120.0771 · Cited by 2,469
Where Is Current Research on Blockchain Technology?—A Systematic Review
Yli-Huumo, J., Ko, D., Choi, S., Park, S., & Smolander, K. (2016) · PLOS ONE · doi:10.1371/journal.pone.0163477 · Cited by 2,317
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Blockchain technology: principles and applications
Pilkington, M. (2016) · Research Handbook on Digital Transformations · doi:10.4337/9781784717766.00019 · Cited by 1,627
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119
A Review on the Use of Blockchain for the Internet of Things
Fernandez-Carames, T. M., & Fraga-Lamas, P. (2018) · IEEE Access · doi:10.1109/access.2018.2842685 · Cited by 1,078
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
From rapid prototyping to home fabrication: How 3D printing is changing business model innovation
Rayna, T., & Striukova, L. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.07.023 · Cited by 816
Making sense of 3-D printing: Creating a map of additive manufacturing products and services
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., & Limperos, J. W. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.005 · Cited by 750
Blockchain technology in the chemical industry: Machine-to-machine electricity market
Sikorski, J. J., Haughton, J., & Kraft, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.03.039 · Cited by 682
Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features
Simchi, A. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.04.117 · Cited by 590
Balla, V. K., Bodhak, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.046 · Cited by 504
Direct digital manufacturing: definition, evolution, and sustainability implications
Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G., & Thiede, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.009 · Cited by 498
Jiang, R., Kleer, R., & Piller, F. T. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.01.006 · Cited by 480
Urbinati, A., Chiaroni, D., Chiesa, V., & Frattini, F. (2020) · R&D Management · doi:10.1111/radm.12313 · Cited by 420
Self-citationThermodynamic Analysis of Resources Used in Manufacturing Processes
Gutowski, T. G., Branham, M. S., Dahmus, J. B., Jones, A. J., Thiriez, A., & Sekulic, D. P. (2009) · Environmental Science & Technology · doi:10.1021/es8016655 · Cited by 376
Blockchain in logistics and supply chain : trick or treat?
Hackius, N., & Petersen, M. (2017) · Econstor (Econstor) · doi:10.15480/882.1444 · Cited by 360
Blockchain Basics: A Non-Technical Introduction in 25 Steps
Drescher, D. (2017) · Apress eBooks · doi:10.1007/978-1-4842-2604-9 · Cited by 313
Creating and capturing value from Big Data: A multiple-case study analysis of provider companies
Urbinati, A., Bogers, M., Chiesa, V., & Frattini, F. (2019) · Technovation · doi:10.1016/j.technovation.2018.07.004 · Cited by 284
Self-citationResearch Handbook on Digital Transformations
(2016) · Edward Elgar Publishing eBooks · doi:10.4337/9781784717766 · Cited by 263
Sustainability Characterization for Additive Manufacturing
Mani, M., Lyons, K. W., & Gupta, S. K. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.016 · Cited by 250
A complexity approach to innovation networks. The case of the aircraft industry (1909–1997)
Frenken, K. (2000) · Research Policy · doi:10.1016/s0048-7333(99)00064-5 · Cited by 221
Sabatier, V., Craig-Kennard, A., & Mangematin, V. (2012) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2011.12.007 · Cited by 187
Blockchain Technology Adoption Status and Strategies
Woodside, J. M., Augustine, F. K., & Giberson, W. (2017) · Journal of International Technology and Information Management · doi:10.58729/1941-6679.1300 · Cited by 164
Kennedy, Z. C., Stephenson, D. E., Christ, J. F., Pope, T. R., Arey, B. W., Barrett, C. A., & Warner, M. G. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc03348f · Cited by 132
Streamlining the additive manufacturing digital spectrum: A systems approach
Kim, D. B., Witherell, P., Lipman, R. R., & Feng, S. C. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.10.004 · Cited by 128
Overview of Additive Manufacturing Informatics: “A Digital Thread”
Mies, D., Marsden, W., & Warde, S. (2016) · Integrating materials and manufacturing innovation · doi:10.1186/s40192-016-0050-7 · Cited by 115
Exploring Miner Evolution in Bitcoin Network
Wang, L., & Liu, Y. (2015) · Lecture notes in computer science · doi:10.1007/978-3-319-15509-8_22 · Cited by 67
George, A. A., Subramanian, C., & Abhilash, K. A. (2020) · Cited by 56
Blockchain Technology: Enhancing Appropriate Patent Application
Yenbutra, P., & Umpai, K. (2019) · International Conference on E-Society, E-Education and E-Technology (ICSET) · doi:10.1145/3355966.3355972 · Cited by 40
Blockchain and Smart Contracts: What the AEC sector needs to know
Lamb, K. (2018) · Cambridge University Engineering Department Publications Database · doi:10.17863/cam.26272 · Cited by 37
Asserting Patents to Combat Infringement via 3D Printing: It's No 'Use'Preprint
Brean, D. H. (2012) · SSRN Electronic Journal · doi:10.2139/ssrn.2088294 · Cited by 37
Using Blockchain to Enhance the Trustworthiness of Business Processes: A Goal-Oriented Approach
Johng, H., Kim, D., Hill, T., et al. (2018) · IEEE International Conference on Services Computing · doi:10.1109/scc.2018.00041 · Cited by 31
Cited by
Digital twin: Enabling technologies, challenges and open research
Fuller, A., Fan, Z., Day, C., & Barlow, C. (2020) · IEEE Access · doi:10.1109/access.2020.2998358 · Cited by 2,965
Digital twin: values, challenges and enablers from a modeling perspective
Rasheed, A., San, O., & Kvamsdal, T. (2020) · IEEE Access · doi:10.1109/access.2020.2970143 · Cited by 1,952
Digital twin paradigm: A systematic literature review
Semeraro, C., Lezoche, M., Panetto, H., & Dassisti, M. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103469 · Cited by 986
Upadhyay, A., Mukhuty, S., Kumar, V., & Kazancoglu, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126130 · Cited by 664
Leng, J., Ruan, G., Jiang, P., Xu, K., Liu, Q., Zhou, X., & Liu, C. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110112 · Cited by 506
Metadata
- Authors
- Mandolla, C., Petruzzelli, A. M., Percoco, G., & Urbinati, A.
- Venue
- Computers in Industry
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 109
- Pages
- 134-152
- ISSN
- 0166-3615 (ISSN-L)
- OpenAlex
- W2944810901
- Cited by
- 416
- References
- 41
- FWCI
- 37.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.