The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications
Abstract
Abstract The objective of this work is to develop KH550-treated basalt fiber (KBF) reinforced polylactide (PLA) composite as a potential 3D-printed feedstock. Herein, physical (thermal, mechanical, and rheological) properties and the feasibility of PLA/KBF for 3D printing are investigated. KBF is found to be oriented-dispersed along the printing direction in printed specimen, in contrast with randomly-distributed KBF in casting counterparts. Mechanical tests, rheological behavior and microstructure observation of PLA/KBF filaments are performed to compare with carbon fiber (CF) reinforced counterparts with the same fiber weight fraction. The results suggest that PLA/KBF exhibit comparable tensile properties and superior flexural properties to those of PLA/CF control, which can be attributed to high complex viscosity of PLA/CF affecting the interlayer adhesion. Furthermore, the printing feasibility of PLA/KBF filaments are evaluated. With increasing fiber length and weight fraction of KBF, low infill and micro-defects are shown in CT scans, which explain the deterioration in mechanical performance. The present work proves PLA/KBF as a mechanical-improved and low-cost feedstock for 3D printing applications in complex design and variable sizes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301
3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.032 · Cited by 293
Cited by
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
WANG, P., ZOU, B., DING, S., LI, L., & HUANG, C. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.05.040 · Cited by 365
Wang, P., Zou, B., Ding, S., Huang, C., Shi, Z., Ma, Y., & Yao, P. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108175 · Cited by 357
Shanmugam, V., Rajendran, D. J. J., Babu, K., Rajendran, S., Veerasimman, A., Marimuthu, U., Singh, S., Das, O., Neisiany, R. E., Hedenqvist, M. S., et al. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106925 · Cited by 268
Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review
Karimi, A., Rahmatabadi, D., & Baghani, M. (2024) · Polymers · doi:10.3390/polym16060831 · Cited by 201
Metadata
- Authors
- Sang, L., Han, S., Li, Z., Yang, X., & Hou, W.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 164
- Pages
- 629-639
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2914338102
- Cited by
- 189
- References
- 2
- FWCI
- 8.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications. https://app.cochat.ai/papers/10.1016/j.compositesb.2019.01.085
- The paper
- Sang, L., Han, S., Li, Z., Yang, X., & Hou, W. (2019). Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2019.01.085
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
