The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
Abstract
Abstract Additive manufacturing of fiber reinforced composites is of great interest in various industrial applications. In this study, an innovative extruder is designed and manufactured for fused deposition modeling (FDM) 3D printers in order to produce continuous fiber reinforced thermoplastic (CFRT) composites. There are some challenges along this way such as making tension in fiber, fiber surface preparation, printing temperature and feed rate to produce a composite part with good quality. These challenges are discussed in detail. The main advantage of this extruder is that it can be mounted on the available FDM 3D printers and consequently there is no need to design a new chassis. In order to assess the quality of products, standard tensile and three-point bending specimens made of pure poly lactic acid (PLA) and carbon fiber reinforced PLA are printed and tested under quasi-static loading. Experimental results show significant improvements of tensile and bending properties of PLA. Morphological analysis is also conducted to study the bonding between the carbon fiber and PLA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Astm, I. (2007) · Medical Entomology and Zoology · Cited by 1,943
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
An investigation into 3D printing of fibre reinforced thermoplastic composites
Blok, L. G., Longana, M. L., Yu, H., & Woods, B. K. S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.039 · Cited by 866
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707
Measurements of the mechanical response of unidirectional 3D-printed PLA
Song, Y., Li, Y., Song, W., Yee, K., Lee, K.-Y., & Tagarielli, V. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.051 · Cited by 624
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Melenka, G. W., Cheung, B. K. O., Schofield, J. S., Dawson, M. R., & Carey, J. P. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.018 · Cited by 597
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Nanofiber‐reinforced polymers prepared by fused deposition modeling
Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12496 · Cited by 484
Characterization of 3D printed long fibre reinforced composites
Justo, J., Távara, L., García-Guzmán, L., & París, F. (2018) · Composite Structures · doi:10.1016/j.compstruct.2017.11.052 · Cited by 473
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., & Ziegmann, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.139 · Cited by 432
Liu, S., Li, Y., & Li, N. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.007 · Cited by 207
Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
Türk, D.-A., Brenni, F., Zogg, M., & Meboldt, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.050 · Cited by 168
Three-dimensional printing: technologies, applications, and limitations in neurosurgery
Pucci, J. U., Christophe, B. R., Sisti, J. A., & Connolly, E. S. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.05.007 · Cited by 168
Dieless Forming of Carbon Fibre Reinforced Plastic Parts Using 3D Printer
Mori, K., Maeno, T., & Nakagawa, Y. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.10.196 · Cited by 155
Reconstruction and Development of a 3D Printer Using FDM Technology
Kun, K. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.657 · Cited by 103
Cited by
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Shanmugam, V., Das, O., Babu, K., Marimuthu, U., Veerasimman, A., Johnson, D. J., Neisiany, R. E., Hedenqvist, M. S., Ramakrishna, S., & Berto, F. (2021) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.106007 · Cited by 538
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404
Metadata
- Authors
- Heidari-Rarani, M., Rafiee-Afarani, M., & Zahedi, A. M.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 175
- Pages
- 107147
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2953963183
- Cited by
- 615
- References
- 29
- FWCI
- 26.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.