The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
A review on mixture design methods for geopolymer concrete
Abstract
Abstract Geopolymer concretes (GPCs) can be produced by chemical activation of industrial by-products and processed natural minerals that contain aluminosilicate. There have been a few demonstrative constructions built using of GPCs as a greener alternative choice to Portland cement concrete (PCC); unfortunately, there is no standard or specification of guidelines for the design of GPC mixtures. This is partially because of so many variables affecting GPC manufacture, such as the property of raw materials, type and dosage of activator and curing scheme. Despite the fact of convention of building industry, the lack of proper mixture design method limits the wide acceptance of GPC in industry. In this paper, a review on currently reported mixture design methods of GPC prepared with slag and fly ash is presented. The various methods are classified into three categories: target strength method, performance-based method, and statistical factorial model method. The difference in the procedures, advantages and disadvantages among those methods are discussed. It is recommended that a proper design method should be chosen according to actual production situation and performance requirement of GPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
DEVELOPMENT AND PROPERTIES OF LOW-CALCIUM FLY ASH-BASED GEOPOLYMER CONCRETE
Hardjito, D., & Rangan, B. V. (2005) · eSpace (Curtin University) · Cited by 822
Technical and commercial progress in the adoption of geopolymer cement
Van Deventer, J. S. J., Provis, J. L., & Duxson, P. (2012) · Minerals Engineering · doi:10.1016/j.mineng.2011.09.009 · Cited by 820
Handbook of Alkali-Activated Cements, Mortars and Concretes
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16511-7 · Cited by 688
Properties of fly ash geopolymer concrete designed by Taguchi method
Olivia, M., & Nikraz, H. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.10.036 · Cited by 615
Damage behavior of geopolymer composites exposed to elevated temperatures
Kong, D. L. Y., & Sanjayan, J. G. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.08.001 · Cited by 581
Cited by
Self-healing cement concrete composites for resilient infrastructures: A review
Zhang, W., Zheng, Q., Ashour, A., & Han, B. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.107892 · Cited by 490
Potential applications of geopolymer concrete in construction: A review
Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00733 · Cited by 481
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
Liu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103665 · Cited by 351
Self-citationLiu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Self-citationChen, K., Wu, D., Xia, L., Cai, Q., & Zhang, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122496 · Cited by 277
Self-citationLao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
“In recent decades, geopolymer, which is known as a clinker-free lowcarbon binder, has a good potential to be a sustainable replacement for Portland cement, and has gradually attracted increasing attentions of researchers (Li et al., 2019; Amran et al., 2020; Xu et al., 2021a; Peng et al., 2022; Peng et al., 2023).”
BackgroundSantana, A. P. R., Andrade, D. F., Guimarães, T. G. S., Amaral, C. D. B., Oliveira, A., & Gonzalez, M. H. (2020) · Talanta · doi:10.1016/j.talanta.2020.120956 · Cited by 69
Metadata
- Authors
- Li, N., Shi, C., Zhang, Z., Wang, H., & Liu, Y.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 178
- Pages
- 107490
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2975124329
- Cited by
- 351
- References
- 49
- FWCI
- 20.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.