The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
A review on mixture design methods for geopolymer concrete
Abstract
Abstract Geopolymer concretes (GPCs) can be produced by chemical activation of industrial by-products and processed natural minerals that contain aluminosilicate. There have been a few demonstrative constructions built using of GPCs as a greener alternative choice to Portland cement concrete (PCC); unfortunately, there is no standard or specification of guidelines for the design of GPC mixtures. This is partially because of so many variables affecting GPC manufacture, such as the property of raw materials, type and dosage of activator and curing scheme. Despite the fact of convention of building industry, the lack of proper mixture design method limits the wide acceptance of GPC in industry. In this paper, a review on currently reported mixture design methods of GPC prepared with slag and fly ash is presented. The various methods are classified into three categories: target strength method, performance-based method, and statistical factorial model method. The difference in the procedures, advantages and disadvantages among those methods are discussed. It is recommended that a proper design method should be chosen according to actual production situation and performance requirement of GPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
DEVELOPMENT AND PROPERTIES OF LOW-CALCIUM FLY ASH-BASED GEOPOLYMER CONCRETE
Hardjito, D., & Rangan, B. V. (2005) · eSpace (Curtin University) · Cited by 822
Technical and commercial progress in the adoption of geopolymer cement
Van Deventer, J. S. J., Provis, J. L., & Duxson, P. (2012) · Minerals Engineering · doi:10.1016/j.mineng.2011.09.009 · Cited by 820
Handbook of Alkali-Activated Cements, Mortars and Concretes
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16511-7 · Cited by 688
Properties of fly ash geopolymer concrete designed by Taguchi method
Olivia, M., & Nikraz, H. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.10.036 · Cited by 615
Damage behavior of geopolymer composites exposed to elevated temperatures
Kong, D. L. Y., & Sanjayan, J. G. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.08.001 · Cited by 581
Xie, J., Wang, J., Rao, R., Wang, C., & Fang, C. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.067 · Cited by 581
Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate
Barbosa, V. F. F., & MacKenzie, K. J. D. (2003) · Materials Research Bulletin · doi:10.1016/s0025-5408(02)01022-x · Cited by 542
Factors affecting the suitability of fly ash as source material for geopolymers
Díaz, E., Allouche, E. N., & Eklund, S. E. (2009) · Fuel · doi:10.1016/j.fuel.2009.09.012 · Cited by 521
Concrete Construction Engineering Handbook
(2008) · CRC Press eBooks · doi:10.1201/9781420007657 · Cited by 499
Microstructural changes in alkali-activated slag mortars induced by accelerated carbonation
Li, N., Farzadnia, N., & Shi, C. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.07.008 · Cited by 488
Self-citationDesign of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method
Hadi, M. N. S., Farhan, N. A., & Sheikh, M. N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.131 · Cited by 431
A mix design procedure for geopolymer concrete with fly ash
Pavithra, P., Srinivasula Reddy, M., Dinakar, P., Hanumantha Rao, B., Satpathy, B. K., & Mohanty, A. N. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.041 · Cited by 404
Mechanical Properties of Fly-Ash-Based Geopolymer Concrete
(2011) · ACI Materials Journal · doi:10.14359/51682495 · Cited by 377
Influence of aggregate content on the behavior of fly ash based geopolymer concrete
Joseph, B., & Mathew, G. (2012) · Scientia Iranica · doi:10.1016/j.scient.2012.07.006 · Cited by 374
Durability of alkali-activated materials in aggressive environments: A review on recent studies
Zhang, J., Shi, C., Zhang, Z., & Ou, Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.027 · Cited by 374
Self-citationLing, Y., Wang, K., Li, W., Shi, G., & Lü, P. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.092 · Cited by 282
Freeze–thaw cycle test and damage mechanics models of alkali-activated slag concrete
Fu, Y., Cai, L., & Yonggen, W. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.12.006 · Cited by 279
Guidelines for mix proportioning of fly ash/GGBS based alkali activated concretes
Rafeet, A., Vinai, R., Soutsos, M., & Sha, W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.036 · Cited by 258
Li, N., Shi, C., & Zhang, Z. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.04.024 · Cited by 249
Self-citationMix design development of fly ash and ground granulated blast furnace slag based geopolymer concrete
Reddy, M. S., Dinakar, P., & Rao, B. H. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.09.010 · Cited by 247
An overview on the reuse of waste glasses in alkali-activated materials
Liu, Y., Shi, C., Zhang, Z., & Li, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.007 · Cited by 246
Self-citationGeopolymer Concrete with Fly Ash
Lloyd, N. A., & Rangan, V. (2010) · eSpace (Curtin University) · Cited by 244
Zhang, Z., Provis, J. L., Ma, X., Reid, A., & Wang, H. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.06.010 · Cited by 242
Self-citationLi, N., Shi, C., Zhang, Z., Zhu, D., Hwang, H.-J., Zhu, Y., & Sun, T. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.07.009 · Cited by 238
Self-citationA mix design procedure for low calcium alkali activated fly ash-based concretes
Talha Junaid, M., Kayali, O., Khennane, A., & Black, J. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.048 · Cited by 219
Multiple Regression Model for Compressive Strength Prediction of High Performance Concrete
F.M. Zain, M., & M. Abd, S. (2008) · Journal of Applied Sciences · doi:10.3923/jas.2009.155.160 · Cited by 185
Effect of process parameters on the performance of fly ash/GGBS blended geopolymer composites
El-Hassan, H., & Ismail, N. (2017) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2017.1411296 · Cited by 174
Composition design and performance of alkali-activated cements
Li, N., Shi, C., Wang, Q., Zhang, Z., & Ou, Z. (2017) · Materials and Structures · doi:10.1617/s11527-017-1048-0 · Cited by 169
Self-citationFracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature
Ding, Y., Shi, C.-J., & Li, N. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.138 · Cited by 165
Self-citationToward an indexing approach to evaluate fly ashes for geopolymer manufacture
Zhang, Z., Provis, J. L., Zou, J., Reid, A., & Wang, H. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.04.007 · Cited by 161
Self-citationLokuge, W. P., Wilson, A., Gunasekara, C., Law, D. W., & Setunge, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.175 · Cited by 145
Yang, K., Cho, A.-R., & Song, J. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.10.062 · Cited by 138
Cheah, C. B., Tan, L. E., & Ramli, M. B. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.12.056 · Cited by 136
Alkali activated slag concretes designed for a desired slump, strength and chloride diffusivity
Bondar, D., Ma, Q., Soutsos, M. N., Basheer, M., Provis, J. L., & Nanukuttan, S. V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.124 · Cited by 130
Corrosion resistance of alkali-activated slag cement
Shi, C. (2003) · Advances in Cement Research · doi:10.1680/adcr.2003.15.2.77 · Cited by 124
Self-citationGeopolymer concrete-filled pultruded composite beams – Concrete mix design and application
Ferdous, W., Manalo, A. C., Khennane, A., & Kayali, O. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.12.012 · Cited by 113
Mehta, A., Siddique, R., Singh, B. P., Aggoun, S., Łagód, G., & Barnat-Hunek, D. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.066 · Cited by 112
Railway sleepers made of alkali activated fly ash concrete
Palomo, A., Fernández‐Jiménez, A., Hombrados, C. L., & Lleyda, J. L. (2007) · Revista de ingeniería de construcción · doi:10.4067/s0718-50732007000200001 · Cited by 108
Khalaj, G., Hassani, S. E. S., Khezrloo, A., & Haratifar, E.-A.-D. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.03.094 · Cited by 73
Critical evaluation of strength prediction methods for alkali-activated fly ash
Aughenbaugh, K. L., Williamson, T., & Juenger, M. C. G. (2014) · Materials and Structures · doi:10.1617/s11527-014-0496-z · Cited by 73
Bondar, D., Nanukuttan, S. V., Provis, J. L., & Soutsos, M. N. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.332 · Cited by 71
Development of a mix design methodology for high‐performance geopolymer mortars
Ng, T. S., & Foster, S. J. (2013) · Structural Concrete · doi:10.1002/suco.201200018 · Cited by 48
Analysing the relation between pore structure and permeability of alkali-activated concrete binders
Zhang, Z., & Wang, H. (2015) · Elsevier eBooks · doi:10.1533/9781782422884.2.235 · Cited by 39
Self-citationHung, C., & Chang, J. (2013) · Journal of Marine Science and Technology · doi:10.6119/jmst-012-0109-4 · Cited by 24
Cited by
Self-healing cement concrete composites for resilient infrastructures: A review
Zhang, W., Zheng, Q., Ashour, A., & Han, B. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.107892 · Cited by 490
Potential applications of geopolymer concrete in construction: A review
Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00733 · Cited by 481
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
Liu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103665 · Cited by 351
Self-citation
Metadata
- Authors
- Li, N., Shi, C., Zhang, Z., Wang, H., & Liu, Y.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 178
- Pages
- 107490
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2975124329
- Cited by
- 351
- References
- 49
- FWCI
- 20.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.