The DOI matches its Crossref record; 101 of the 101 references it cites were found in a registry or an index.
A review of recent research on bio-inspired structures and materials for energy absorption applications
Abstract
It is widely known that the availability of lightweight structures with excellent energy absorption capacity is essential for numerous engineering applications. Inspired by many biological structures in nature, bio-inspired structures have been proved to exhibit a significant improvement over conventional structures in energy absorption capacity. Therefore, use of the biomimetic approach for designing novel lightweight structures with excellent energy absorption capacity has been increasing in engineering fields in recent years. This paper provides a comprehensive overview of recent advances in the development of bio-inspired structures for energy absorption applications. In particular, we describe the unique features and remarkable mechanical properties of biological structures such as plants and animals, which can be mimicked to design efficient energy absorbers. Next, we review and discuss the structural designs as well as the energy absorption characteristics of current bio-inspired structures with different configurations and structures, including multi-cell tubes, frusta, sandwich panels, composite plates, honeycombs, foams, building structures and lattices. These materials have been used for bio-inspired structures, including but not limited to metals, polymers, fibre-reinforced composites, concrete and glass. We also discussed the manufacturing techniques of bio-inspired structures based on conventional methods, and adaptive manufacturing (3D printing). Finally, contemporary challenges and future directions for bio-inspired structures are presented. This synopsis provides a useful platform for researchers and engineers to create novel designs of bio-inspired structures for energy absorption applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
The Stomatopod Dactyl Club: A Formidable Damage-Tolerant Biological Hammer
Weaver, J. C., Milliron, G. W., Miserez, A., Evans-Lutterodt, K., Herrera, S., Gallana, I., Mershon, W. J., Swanson, B., Zavattieri, P., DiMasi, E., et al. (2012) · Science · doi:10.1126/science.1218764 · Cited by 938
Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., et al. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.001 · Cited by 836
Twisted fibrous arrangements in biological materials and cholesteric mesophases
Bouligand, Y. (1972) · Tissue and Cell · doi:10.1016/s0040-8166(72)80042-9 · Cited by 818
Flexural stiffness in insect wings I. Scaling and the influence of wing venation
Combes, S. A., & Daniel, T. L. (2003) · Journal of Experimental Biology · doi:10.1242/jeb.00523 · Cited by 571
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Nano/Micro‐Manufacturing of Bioinspired Materials: a Review of Methods to Mimic Natural Structures
Zhang, C., Mcadams, D. A., & Grunlan, J. C. (2016) · Advanced Materials · doi:10.1002/adma.201505555 · Cited by 443
Yang, W., Chen, I. H., Gludovatz, B., Zimmermann, E. A., Ritchie, R. O., & Meyers, M. A. (2013) · Advanced Materials · doi:10.1002/adma.201202713 · Cited by 426
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Magnetically assisted slip casting of bioinspired heterogeneous composites
Le Ferrand, H., Bouville, F., Niebel, T. P., & Studart, A. R. (2015) · Nature Materials · doi:10.1038/nmat4419 · Cited by 400
Hierarchically Enhanced Impact Resistance of Bioinspired Composites
Gu, G. X., Takaffoli, M., & Buehler, M. J. (2017) · Advanced Materials · doi:10.1002/adma.201700060 · Cited by 396
Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
Dimas, L. S., Bratzel, G. H., Eylon, I., & Buehler, M. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300215 · Cited by 385
Overcoming the brittleness of glass through bio-inspiration and micro-architecture
Mirkhalaf, M., Dastjerdi, A. K., & Barthelat, F. (2014) · Nature Communications · doi:10.1038/ncomms4166 · Cited by 384
Iterative Learning Control for a Flapping Wing Micro Aerial Vehicle Under Distributed Disturbances
He, W., Meng, T., He, X., & Sun, C. (2019) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2018.2808321 · Cited by 329
Ma, Q., Cheng, H., Jang, K.-I., Luan, H., Hwang, K.-C., Rogers, J. A., Huang, Y., & Zhang, Y. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.02.012 · Cited by 309
3D printed hierarchical honeycombs with shape integrity under large compressive deformations
Chen, Y., Li, T., Jia, Z., Scarpa, F., Yao, C.-W., & Wang, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.028 · Cited by 284
Zhang, L., Bai, Z., & Bai, F. (2018) · Thin-Walled Structures · doi:10.1016/j.tws.2017.10.010 · Cited by 270
A Sinusoidally Architected Helicoidal Biocomposite
Yaraghi, N. A., Guarín‐Zapata, N., Grunenfelder, L. K., Hintsala, E., Bhowmick, S., Hiller, J. M., Betts, M., Principe, E. L., Jung, J., Sheppard, L., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600786 · Cited by 268
Tran, P., Ngo, T. D., Ghazlan, A., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.083 · Cited by 261
Structural Analysis of a Dragonfly Wing
Jongerius, S. R., & Lentink, D. (2010) · Experimental Mechanics · doi:10.1007/s11340-010-9411-x · Cited by 256
Energy absorbent natural materials and bioinspired design strategies: A review
McKittrick, J., Chen, P.-Y., Tombolato, L., Novitskaya, E. E., Trim, M. W., Hirata, G. A., Olevsky, E. A., Horstemeyer, M. F., & Meyers, M. A. (2010) · Materials Science and Engineering: C · doi:10.1016/j.msec.2010.01.011 · Cited by 240
On hierarchical honeycombs under out-of-plane crushing
Fang, J., Sun, G., Qiu, N., Pang, T., Li, S., & Li, Q. (2018) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2017.08.013 · Cited by 229
Architected Lattices with High Stiffness and Toughness via Multicore–Shell 3D Printing
Mueller, J., Raney, J. R., Shea, K., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201705001 · Cited by 216
Yang, X., Ma, J., Shi, Y., Sun, Y., & Yang, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.040 · Cited by 195
Biomimetic architected materials with improved dynamic performance
Jia, Z., Yu, Y., Hou, S., & Wang, L. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.12.015 · Cited by 195
Extreme lightweight structures: avian feathers and bones
Sullivan, T. N., Wang, B., Espinosa, H. D., & Meyers, M. A. (2017) · Materials Today · doi:10.1016/j.mattod.2017.02.004 · Cited by 191
Additive Manufacturing and Performance of Architectured Cement‐Based Materials
Moini, M., Olek, J., Youngblood, J. P., Magee, B., & Zavattieri, P. D. (2018) · Advanced Materials · doi:10.1002/adma.201802123 · Cited by 184
Biomimetic additive manufactured polymer composites for improved impact resistance
Gu, G. X., Takaffoli, M., Hsieh, A. J., & Buehler, M. J. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.006 · Cited by 180
Yang, X., Sun, Y., Yang, J., & Pan, Q. (2018) · Thin-Walled Structures · doi:10.1016/j.tws.2018.01.014 · Cited by 174
The role of quasi-plasticity in the extreme contact damage tolerance of the stomatopod dactyl club
Amini, S., Tadayon, M., Idapalapati, S., & Miserez, A. (2015) · Nature Materials · doi:10.1038/nmat4309 · Cited by 171
Mechanics of composite elasmoid fish scale assemblies and their bioinspired analogues
Browning, A., Ortiz, C., & Boyce, M. C. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.11.003 · Cited by 166
Speck, O., Speck, D., Horn, R., Gantner, J., & Sedlbauer, K. P. (2017) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/12/1/011004 · Cited by 160
Numerical investigation of the impact behaviour of bioinspired nacre-like aluminium composite plates
Flores‐Johnson, E. A., Shen, L., Guiamatsia, I., & Nguyen, G. D. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.03.001 · Cited by 158
Three-Dimensional-Printing of Bio-Inspired Composites
Gu, G. X., Su, I., Sharma, S., Voros, J. L., Zhao Qin, A., & Buehler, M. J. (2016) · Journal of Biomechanical Engineering · doi:10.1115/1.4032423 · Cited by 156
Zhu, F., Lu, G., Ruan, D., & Wang, Z. (2010) · International Journal of Protective Structures · doi:10.1260/2041-4196.1.4.507 · Cited by 154
Self-citationBiomimetic structure design — a possible approach to change the brittleness of ceramics in nature
Wang, C., Huang, Y. Z., Zan, Q., Guo, H., & Cai, S. (2000) · Materials Science and Engineering C · doi:10.1016/s0928-4931(00)00133-8 · Cited by 146
Zhang, P., Heyne, M. A., & To, A. C. (2015) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2015.06.015 · Cited by 140
Flexibility and protection by design: imbricated hybrid microstructures of bio-inspired armor
Rudykh, S., Ortiz, C., & Boyce, M. C. (2015) · Soft Matter · doi:10.1039/c4sm02907k · Cited by 139
Kitchener, A. C. (1988) · Journal of Zoology · doi:10.1111/j.1469-7998.1988.tb04983.x · Cited by 138
Djumas, L., Molotnikov, A., Simon, G. P., & Estrin, Y. (2016) · Scientific Reports · doi:10.1038/srep26706 · Cited by 138
Yin, S., Li, J., Haoyu, C., Ritchie, R. O., & Xu, J. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.09.038 · Cited by 132
Structure and mechanical properties of selected protective systems in marine organisms
Naleway, S. E., Taylor, J. R. A., Porter, M. M., Meyers, M. A., & McKittrick, J. M. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.10.033 · Cited by 131
Biomimetic cellular metals—using hierarchical structuring for energy absorption
Bührig–Polaczek, A., Fleck, C., Speck, T., Schüler, P., Fischer, S. F., Caliaro, S., & Thielen, M. (2016) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/11/4/045002 · Cited by 130
Chintapalli, R. K., Mirkhalaf, M., Dastjerdi, A. K., & Barthelat, F. (2014) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/9/3/036005 · Cited by 128
Fischer, S. F., Thielen, M., Loprang, R. R., Seidel, R., Fleck, C., Speck, T., & Bührig–Polaczek, A. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201080065 · Cited by 126
Bending efficiency through property gradients in bamboo, palm, and wood-based composites
Wegst, U. G. K. (2011) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2011.02.013 · Cited by 121
How does bio-inspired graded honeycomb filler affect energy absorption characteristics?
Nian, Y., Wan, S., Li, X., Su, Q., & Li, M. (2019) · Thin-Walled Structures · doi:10.1016/j.tws.2019.106269 · Cited by 119
Why the seahorse tail is square
Porter, M. M., Adriaens, D., Hatton, R. L., Meyers, M. A., & McKittrick, J. M. (2015) · Science · doi:10.1126/science.aaa6683 · Cited by 117
Simultaneous improvements of strength and toughness in topologically interlocked ceramics
Mirkhalaf, M., Zhou, T., & Barthelat, F. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807272115 · Cited by 116
In-plane elastic buckling of hierarchical honeycomb materials
Chen, Q., & Pugno, N. M. (2012) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2011.12.003 · Cited by 109
Numerical simulation of ballistic impact behavior of bio-inspired scale-like protection system
Liu, P., Zhu, D., Yao, Y., Wang, J., & Bui, T. Q. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.040 · Cited by 109
A comparative study of bio-inspired protective scales using 3D printing and mechanical testing
Martini, R., Balit, Y., & Barthelat, F. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.025 · Cited by 109
Zhang, X., Xie, J., Chen, J., Okabe, Y., Pan, L., & Xu, M. (2017) · Scientific Reports · doi:10.1038/s41598-017-03767-w · Cited by 104
Effects of architecture level on mechanical properties of hierarchical lattice materials
Yin, S., Chen, H., Li, J., Yu, T., & Xu, J. (2019) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2019.04.051 · Cited by 102
Martini, R., & Barthelat, F. (2016) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/11/6/066001 · Cited by 101
Song, J., Reichert, S., Kallai, I., Gazit, D., Wund, M. A., Boyce, M. C., & Christine Ortiz, B. (2010) · Journal of Structural Biology · doi:10.1016/j.jsb.2010.04.009 · Cited by 98
3D-printing and mechanics of bio-inspired articulated and multi-material structures
Porter, M. M., Ravikumar, N., Barthelat, F., & Martini, R. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.12.016 · Cited by 98
Relationship between wingbeat frequency and resonant frequency of the wing in insects
Ha, N. S., Truong, Q. T., Goo, N. S., & Park, H. C. (2013) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/8/4/046008 · Cited by 94
Self-citationZaheri, A., Fenner, J. S., Russell, B. P., Restrepo, D., Daly, M., Wang, D., Hayashi, C. Y., Meyers, M. A., Zavattieri, P. D., & Espinosa, H. D. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803073 · Cited by 94
Learning from nature: Use material architecture to break the performance tradeoffs
Jia, Z., Yu, Y., & Wang, L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107650 · Cited by 93
Ha, N. S., Lu, G., Shu, D., & Yu, T. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103603 · Cited by 90
Self-citationBio-inspired bimaterial composites patterned using three-dimensional printing
Ko, K., Jin, S., Lee, S. E., Lee, I., & Hong, J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.02.008 · Cited by 88
Topological optimization of biomimetic sandwich structures with hybrid core and CFRP face sheets
Sun, Z. G., Li, D., Zhang, W., Shi, S., & Guo, X. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.01.029 · Cited by 87
The deformation mode and strengthening mechanism of compression in the beetle elytron plate
Chen, J., Zhang, X., Okabe, Y., Saito, K., Guo, Z., & Pan, L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.014 · Cited by 85
Dao, T. D., Ha, N. S., Goo, N. S., & Yu, W. (2017) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x17742728 · Cited by 85
Self-citationMirkhalaf, M., Sunesara, A., Ashrafi, B., & Barthelat, F. (2018) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2018.08.025 · Cited by 85
Highly deformable bones: Unusual deformation mechanisms of seahorse armor
Porter, M. M., Novitskaya, E. E., Castro-Ceseña, A. B., Meyers, M. A., & McKittrick, J. M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.045 · Cited by 82
Design of ultra-lightweight and high-strength cellular structural composites inspired by biomimetics
Hu, Z., Thiyagarajan, K., Bhusal, A., Letcher, T. M., Fan, Q. H., Liu, Q., & Salem, D. R. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.03.033 · Cited by 80
Analyzing nature's protective design: The glyptodont body armor
du Plessis, A., Broeckhoven, C., Yadroitsev, I. A., Yadroitsava, I., & le Roux, S. G. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.03.037 · Cited by 78
Djumas, L., Simon, G. P., Estrin, Y., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-12147-3 · Cited by 77
A numerical study of bioinspired nacre-like composite plates under blast loading
Flores‐Johnson, E. A., Shen, L., Guiamatsia, I., & Nguyen, G. D. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.02.083 · Cited by 76
Influence of geometry on mechanical properties of bio-inspired silica-based hierarchical materials
Dimas, L. S., & Buehler, M. J. (2012) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/7/3/036024 · Cited by 75
Cai, Z., Li, Z., Ding, Y. F., Zheng, J., Liu, J.-H., & Zhou, Z. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.12.139 · Cited by 69
Low velocity impact resistance of bio-inspired building ceramic composites with nacre-like structure
Wang, Z., Sun, Y., Wu, H., & Zhang, C. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.043 · Cited by 67
Mirkhalaf, M., Tanguay, J., & Barthelat, F. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.02.016 · Cited by 66
Sarvestani, H. Y., Mirkhalaf, M., Akbarzadeh, A. H., Backman, D. S., Genest, M., & Ashrafi, B. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107627 · Cited by 62
Stepwise graded struts for maximizing energy absorption in lattices
Mueller, J., & Shea, K. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.10.006 · Cited by 61
Bioinspired composite segmented armour: Numerical simulations
Miranda, P., Pajares, A., & Meyers, M. A. (2018) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2018.09.007 · Cited by 55
Liang, M. H., Liang, H., Yu, H., Yang, J., Li, F., Wang, Z., & Zeng, X. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.02.016 · Cited by 54
Static and dynamic mechanical properties of cattle horns
Li, B., Zhao, H., & Feng, X. (2010) · Materials Science and Engineering C · doi:10.1016/j.msec.2010.08.016 · Cited by 53
Biological armors under impact—effect of keratin coating, and synthetic bio-inspired analogues
Achrai, B., Bar‐On, B., & Wagner, H. D. (2015) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/10/1/016009 · Cited by 52
Anisotropy and non-homogeneity of anAllomyrina Dichotomabeetle hind wing membrane
Ha, N. S., Jin, T., Goo, N. S., et al. (2011) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/6/4/046003 · Cited by 49
Self-citationBio-inspired armor protective material systems for ballistic shock mitigation
Huang, J., Durden, H., & Chowdhury, M. R. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.03.061 · Cited by 47
Tough and deformable glasses with bioinspired cross-ply architectures
Zhen, Y., Dastjerdi, A. K., & Barthelat, F. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.012 · Cited by 45
Light but tough bio-inherited materials: Luffa sponge based nickel-plated composites
Yin, S., Wang, H., Li, J., Ritchie, R. O., & Xu, J. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.02.029 · Cited by 42
Reinforcements in avian wing bones: Experiments, analysis, and modeling
Novitskaya, E. E., Ruestes, C. J., Porter, M. M., Lubarda, V. A., Meyers, M. A., & McKittrick, J. M. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.07.020 · Cited by 41
Graupner, N., Labonte, D., Humburg, H., Buzkan, T., Dörgens, A. L., Kelterer, W., & Müssig, J. (2017) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/aa5262 · Cited by 38
Nacre-inspired composite design approaches for large-scale cementitious members and structures
Soltan, D. G., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.02.006 · Cited by 37
Zhu, K., Yu, W., Aman, Y., & Jing, T. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0139-6 · Cited by 34
Synergistic Effects of Chiral Morphology and Reconfiguration in Cattail Leaves
Zhao, Z.-L., Huang, W., Li, B., Chen, K., Chen, K., Zhao, H., & Feng, X. (2015) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(14)60153-0 · Cited by 30
A bioinspired study on the compressive resistance of helicoidal fibre structures
Tan, T., & Ribbans, B. (2017) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2017.0538 · Cited by 30
Ha, N. S., Truong, Q. T., Phan, H. V., et al. (2014) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(14)60038-x · Cited by 29
Self-citationHa, N. S., Nguyen, Q. V., Goo, N. S., et al. (2012) · Experimental Mechanics · doi:10.1007/s11340-012-9611-7 · Cited by 29
Self-citationCellular cement composites against projectile impact
Ong, C. W. R., Zhang, M., Du, H., & Pang, S. D. (2015) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2015.06.020 · Cited by 28
Le, V. T., Ha, N. S., & Goo, N. S. (2018) · Heat Transfer Engineering · doi:10.1080/01457632.2018.1474603 · Cited by 28
Self-citationProduction and properties of a precision-cast bio-inspired composite
Fischer, S. F., Thielen, M., Weiß, P., Seidel, R., Speck, T., Bührig–Polaczek, A., & Bünck, M. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7878-4 · Cited by 25
Stiffness‐Independent Toughening of Beams through Coaxial Interfaces
Mueller, J., Raney, J. R., Kochmann, D. M., & Shea, K. (2018) · Advanced Science · doi:10.1002/advs.201800728 · Cited by 19
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Advanced sandwich structures for thermal protection systems in hypersonic vehicles: A review
Le, V. T., Ha, N. S., & Goo, N. S. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109301 · Cited by 532
Self-citationWu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Ha, N. S., & Lu, G. (2020) · Thin-Walled Structures · doi:10.1016/j.tws.2020.106995 · Cited by 397
Self-citation
Metadata
- Authors
- Ha, N. S., & Lu, G.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 181
- Pages
- 107496
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2978281462
- Cited by
- 1,175
- References
- 101
- FWCI
- 43.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.