The DOI matches its Crossref record; 137 of the 137 references it cites were found in a registry or an index.
Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges
Abstract
Abstract Geopolymers, combining some characteristics of organic polymers, cements and ceramics for its special poly-condensed network structure, have received extensive attention of the researchers as a green cementitious material because of favorable and unique characteristics. This study mainly presents an overview on the progress of geopolymers research and development in recent decades. The works on raw materials, geopolymerization kinetics, the applications development and challenges of geopolymers are reviewed. This paper focuses on the applications progress of geopolymer as green civil engineering materials, rapidly-repair and dealing with poisonous and radioactive waste materials, coatings, novel ceramic materials, functional composite, three-dimensional printing materials and biological materials, etc. The main contribution of this review is to systematically summarize the complex and diverse of published results on geopolymers application in reality and present future challenges, which is beneficial to the further research activities of civil engineers, environmental scientists, chemists and materials scientists. The current investigation indicates that the geopolymers not only exhibit widespread application prospect to be used as sustainable construction materials, but also have great potential in the fields of three-dimensional printing materials, biological materials and other emerging geopolymer functional materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
A review on the utilization of fly ash
Ahmaruzzaman, M. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.003 · Cited by 2,641
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
Sustainable cement production—present and future
Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.019 · Cited by 1,643
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Self-cleaning applications of TiO2 by photo-induced hydrophilicity and photocatalysis
Banerjee, S., Dionysiou, D. D., & Pillai, S. C. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.03.058 · Cited by 996
Geopolymeric materials prepared using Class F fly ash and elevated temperature curing
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 946
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
Geopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Self-citationFire-resistant geopolymer produced by granulated blast furnace slag
Cheng, T. W., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 833
Van den Heede, P., & De Belie, N. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.01.004 · Cited by 824
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Van Jaarsveld, J. G. S., Van Deventer, J. S. J., & Lorenzen, L. (1997) · Minerals Engineering · doi:10.1016/s0892-6875(97)00046-0 · Cited by 674
Utilisation of fly ash in a geopolymeric material
Swanepoel, J. C., & Strydom, C. A. (2002) · Applied Geochemistry · doi:10.1016/s0883-2927(02)00005-7 · Cited by 642
Cement industry greenhouse gas emissions – management options and abatement cost
Kajaste, R., & Hurme, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.055 · Cited by 584
Use of Infrared Spectroscopy to Study Geopolymerization of Heterogeneous Amorphous Aluminosilicates
Lee, W. K. W., & van Deventer, J. S. J. (2003) · Langmuir · doi:10.1021/la026127e · Cited by 538
Fly ash-based geopolymers: The relationship between composition, pore structure and efflorescence
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.06.004 · Cited by 527
Self-citationPart, W. K., Ramli, M., & Cheah, C. B. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.12.065 · Cited by 525
A review on alkaline activation: New analytical perspectives
Palomo, A., Krivenko, P., Garcia-Lodeiro, I., Kavalerova, E., Maltseva, O., & Fernández-Jiménez, A. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.00314 · Cited by 501
Zhang, Z., Wang, H., Provis, J. L., Bullen, F., Reid, A., & Zhu, Y. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.03.021 · Cited by 494
Self-citationEfflorescence control in geopolymer binders based on natural pozzolan
Najafi Kani, E., Allahverdi, A., & Provis, J. L. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.07.007 · Cited by 476
Evaluation of iron ore tailings as replacement for fine aggregate in concrete
Shettima, A. U., Hussin, M. W., Ahmad, Y., & Mirza, J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.095 · Cited by 453
Phoo-ngernkham, T., Chindaprasirt, P., Sata, V., Hanjitsuwan, S., & Hatanaka, S. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.09.049 · Cited by 452
Mechanical and microstructural properties of alkali-activated fly ash geopolymers
Komljenović, M., Baščarević, Z., & Bradić, V. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.04.064 · Cited by 446
Factors affecting hazardous waste solidification/stabilization: A review
Malviya, R., & Chaudhary, R. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.01.065 · Cited by 436
Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization
Kumar, A., & Kumar, S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.013 · Cited by 425
In Situ ATR-FTIR Study of the Early Stages of Fly Ash Geopolymer Gel Formation
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Langmuir · doi:10.1021/la701185g · Cited by 411
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
He, J. X., Zhang, J., Yu, Y., & Zhang, G. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.011 · Cited by 376
Geopolymers for immobilization of Cr6+, Cd2+, and Pb2+
Zhang, J., Provis, J. L., Feng, D., & van Deventer, J. S. J. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.01.053 · Cited by 369
Effects of calcination temperature of kaolinite clays on the properties of geopolymer cements
Elimbi, A., Tchakoute, H. K., & Njopwouo, D. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.12.055 · Cited by 367
High-Strength Geopolymer Using Fine High-Calcium Fly Ash
Chindaprasirt, P., Chareerat, T., Hatanaka, S., & Cao, T. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000161 · Cited by 365
Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack
Sata, V., Sathonsaowaphak, A., & Chindaprasirt, P. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.01.010 · Cited by 363
Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete
Okoye, F. N., Durgaprasad, J., & Singh, N. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.10.084 · Cited by 363
Paria, S., & Yuet, P. K. (2006) · Environmental Reviews · doi:10.1139/a06-004 · Cited by 331
Nematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Geopolymerisation kinetics. 2. Reaction kinetic modelling
Provis, J. L., & van Deventer, J. S. J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.01.028 · Cited by 323
Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review
Sumesh, M., Alengaram, U. J., Jumaat, M. Z., Mo, K. H., & Alnahhal, M. F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.206 · Cited by 315
Effect of Alumina Release Rate on the Mechanism of Geopolymer Gel Formation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2010) · Chemistry of Materials · doi:10.1021/cm101151n · Cited by 314
Potential of geopolymer technology towards green buildings and sustainable cities
Komnitsas, K. A. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.11.2108 · Cited by 298
A brief on high-volume Class F fly ash as cement replacement – A guide for Civil Engineer
Rashad, A. M. (2015) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2015.10.002 · Cited by 291
Ambient Temperature Drying Shrinkage and Cracking in Metakaolin‐Based Geopolymers
Kuenzel, C., Vandeperre, L. J., Donatello, S., Boccaccini, A. R., & Cheeseman, C. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05380.x · Cited by 291
One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends
Ke, X., Bernal, S. A., Ye, N., Provis, J. L., & Yang, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13231 · Cited by 283
Winnefeld, F., Leemann, A., Lucuk, M., Svoboda, P., & Neuroth, M. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.11.007 · Cited by 268
Effects of nano-TiO2 on strength, shrinkage and microstructure of alkali activated slag pastes
Yang, L. Y., Jia, Z. J., Zhang, Y. M., & Dai, J. G. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.009 · Cited by 267
Self-citationHigh calcium fly ash geopolymer mortar containing Portland cement for use as repair material
Phoo-ngernkham, T., Sata, V., Hanjitsuwan, S., Ridtirud, C., Hatanaka, S., & Chindaprasirt, P. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.139 · Cited by 262
Chemical deformation of metakaolin based geopolymer
Li, Z., Zhang, S., Zuo, Y., Chen, W., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.03.017 · Cited by 262
Effect of the SiO2/Na2O ratio on the alkali activation of fly ash. Part II: 29Si MAS-NMR Survey
Criado, M., Fernández-Jiménez, A., Palomo, A., Sobrados, I., & Sanz, J. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.05.062 · Cited by 261
Geopolymer from kaolin in China: An overview
Zhang, Z. H., Zhu, H. J., Zhou, C. H., & Wang, H. (2016) · Applied Clay Science · doi:10.1016/j.clay.2015.04.023 · Cited by 259
Self-citationBonding and abrasion resistance of geopolymeric repair material made with steel slag
Hu, S., Wang, H., Zhang, G., & Ding, Q. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.04.004 · Cited by 258
Self-citationSorptivity and acid resistance of ambient-cured geopolymer mortars containing nano-silica
Deb, P. S., Sarker, P. K., & Barbhuiya, S. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.06.017 · Cited by 256
Zhang, Z., Provis, J. L., Wang, H., et al. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.01.040 · Cited by 250
Self-citationZhang, M., El-Korchi, T., Zhang, G., Liang, J., & Tao, M. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.058 · Cited by 226
Nematollahi, B., Sanjayan, J., Qiu, J., & Yang, E.-H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.117 · Cited by 223
Current Progress of 3D Concrete Printing Technologies
Nematollahi, B., Xia, M., & Sanjayan, J. (2017) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2017/0035 · Cited by 220
UTILIZATION OF ALUMINA RED MUD FOR SYNTHESIS OF INORGANIC POLYMERIC MATERIALS
Dimas, D. D., Giannopoulou, I. P., & Panias, D. (2009) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500802498199 · Cited by 214
Hoy, M., Horpibulsuk, S., & Arulrajah, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.136 · Cited by 212
Tensile Strain Hardening Behavior of PVA Fiber-Reinforced Engineered Geopolymer Composite
Nematollahi, B., Sanjayan, J., & Ahmed Shaikh, F. U. (2015) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001242 · Cited by 205
Xia, M., Nematollahi, B., & Sanjayan, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.01.013 · Cited by 202
Abbasi, S. M., Ahmadi, H., Khalaj, G., & Ghasemi, B. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.06.080 · Cited by 200
Matrix design of strain hardening fiber reinforced engineered geopolymer composite
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.11.039 · Cited by 199
Chen, Z., Li, J.-S., Zhan, B.-J., Sharma, U., & Poon, C. S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.159 · Cited by 198
Masi, G., Rickard, W. D. A., Bignozzi, M. C., & van Riessen, A. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.02.023 · Cited by 194
Co-disposal of MSWI fly ash and Bayer red mud using an one-part geopolymeric system
Ye, N., Chen, Y., Yang, J., Liang, S., Hu, Y., Xiao, B., Huang, Q., Shi, Y., Hu, J., & Wu, X. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.042 · Cited by 194
Pacheco-Torgal, F., Castro-Gomes, J. P., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.10.005 · Cited by 192
Nematollahi, B., Sanjayan, J., Qiu, J., & Yang, E.-H. (2017) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2016.12.005 · Cited by 187
High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber
Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.228 · Cited by 182
A novel geopolymer application: Coatings to protect reinforced concrete against corrosion
Aguirre-Guerrero, A. M., Robayo–Salazar, R., & de Gutiérrez, R. M. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.10.029 · Cited by 182
Physical and mechanical properties of lightweight aerated geopolymer
Sanjayan, J. G., Nazari, A., Chen, L., & Nguyen, G. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.043 · Cited by 176
A novel method to produce dry geopolymer cement powder
Abdel-Gawwad, H. A., & Abo-El-Enein, S. A. (2016) · HBRC Journal · doi:10.1016/j.hbrcj.2014.06.008 · Cited by 176
Mastali, M., & Dalvand, A. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.01.046 · Cited by 175
Comparative deflection hardening behavior of short fiber reinforced geopolymer composites
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.085 · Cited by 171
Evolution and projection of CO2 emissions for China's cement industry from 1980 to 2020
Gao, T., Shen, L., Shen, M., Liu, L., Chen, F., & Gao, L. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.006 · Cited by 164
A sustainable calcined water treatment sludge and rice husk ash geopolymer
Nimwinya, E., Arjharn, W., Horpibulsuk, S., Phoo-ngernkham, T., & Poowancum, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.060 · Cited by 160
The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes
Zhang, D., Wang, D., Lin, X., & Zhang, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.233 · Cited by 155
Sulfate Resistance of Clay-Portland Cement and Clay High-Calcium Fly Ash Geopolymer
Sukmak, P., Silva, P. D., Horpibulsuk, S., & Chindaprasirt, P. (2014) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001112 · Cited by 154
An overview on the potential of geopolymers for concrete infrastructure rehabilitation
Pacheco-Torgal, F., Abdollahnejad, Z., Miraldo, S., Baklouti, S., & Ding, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.07.003 · Cited by 154
Geopolymer foams by gelcasting
Cilla, M. S., Colombo, P., & Morelli, M. R. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.11.011 · Cited by 149
Thermal Resistance Variations of Fly Ash Geopolymers: Foaming Responses
Cheng-Yong, H., Yun-Ming, L., Abdullah, M. M. A. B., & Kamarudin, H. (2017) · Scientific Reports · doi:10.1038/srep45355 · Cited by 149
Characterization of natural pozzolan-based geopolymeric binders
Moon, J., Bae, S., Çelik, K., Yoon, S., Kim, K., Kim, K. S., & Monteiro, P. J. M. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.06.010 · Cited by 141
Durability of alkali activated cement produced from kaolinitic clay
Al-Slaty, F., Khoury, H. N., Rahier, H., & Wastiels, J. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.11.037 · Cited by 140
Thermal and mechanical properties of sustainable lightweight strain hardening geopolymer composites
Nematollahi, B., Ranade, R., Sanjayan, J., & Ramakrishnan, S. (2016) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2016.08.002 · Cited by 136
Graphene/fly ash geopolymeric composites as self-sensing structural materials
Saafi, M., Tang, L. P., Fung, J., Rahman, M., Sillars, F. B., Liggat, J. J., & Zhou, X. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/6/065006 · Cited by 131
Characterizations of flax fabric reinforced nanoclay-geopolymer composites
Assaedi, H. S., Shaikh, F. U. A., & Low, I. M. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.04.007 · Cited by 130
Preparation and characterization of a reflective and heat insulative coating based on geopolymers
Zhang, Z., Wang, K., Mo, B. H., Li, X., & Cui, X. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.028 · Cited by 128
Guo, X., Hu, W., & Shi, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.062 · Cited by 125
Tchakouté, H. K., Mbey, J. A., Elimbi, A., Diffo, B. B. K., & Njopwouo, D. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.08.003 · Cited by 122
Experimental and numerical modelling of mechanical properties of 3D printed honeycomb structures
Panda, B., Leite, M., Biswal, B. B., Niu, X., & Garg, A. (2017) · Measurement · doi:10.1016/j.measurement.2017.11.037 · Cited by 122
Geopolymer synthesis using silica fume and sodium aluminate
Brew, D. R. M., & MacKenzie, K. J. D. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0376-1 · Cited by 121
Current challenges and future potential of 3D concrete printing
Panda, B., Tay, Y. W. D., Paul, S. C., & Tan, M. J. (2018) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.201700279 · Cited by 120
Mechanisms of Heavy Metal Immobilisation using Geopolymerisation Techniques – A review
Vu, T. H., & Gowripalan, N. (2018) · Journal of Advanced Concrete Technology · doi:10.3151/jact.16.124 · Cited by 119
Peng, M. X., Wang, Z. H., Shen, S. H., & Xiao, Q. G. (2014) · Materials and Structures · doi:10.1617/s11527-014-0350-3 · Cited by 118
Influence of steel slag on the mechanical properties and curing time of metakaolin geopolymer
Bai, T., Song, Z., Wu, Y., Hu, X., & Bai, H. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.05.243 · Cited by 116
Self-citationExperimental studies on a new bioactive material: HAIonomer cements
Yap, A. U., Pek, Y. S., Kumar, R. A., Cheang, P., & Khor, K. A. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00208-3 · Cited by 110
Burciaga-Díaz, O., Escalante-Garcia, J. I., Arellano-Aguilar, R., & Gorokhovsky, A. V. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03414.x · Cited by 105
Saafi, M., Gullane, A., Huang, B. S., Sadeghi, H., Ye, J., & Sadeghi, F. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.06.101 · Cited by 98
Influence of calcination temperature of kaolin on the structure and properties of final geopolymer
Wang, M. R., Jia, D., He, P., et al. (2010) · Materials Letters · doi:10.1016/j.matlet.2010.08.007 · Cited by 96
Panizza, M., Natali, M., Garbin, E., et al. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.018 · Cited by 94
Nematollahi, B., Qiu, J., Yang, E., & Sanjayan, J. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.08.118 · Cited by 88
Wang, K.-T., He, Y., Song, X., & Cui, X. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.07.008 · Cited by 87
Roviello, G., Ricciotti, L., Tarallo, O., Ferone, C., Colangelo, F., Roviello, V., & Cioffi, R. (2016) · Materials · doi:10.3390/ma9060461 · Cited by 86
Guo, S., Ma, C., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.116 · Cited by 85
Catauro, M., Bollino, F., Papale, F., & Lamanna, G. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.11.026 · Cited by 84
Dilatometry of geopolymers as a means of selecting desirable fly ash sources
Provis, J. L., Harrex, R. M., Bernal, S. A., Duxson, P., & van Deventer, J. S. J. (2012) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2012.06.001 · Cited by 82
Molino, B., Vincenzo, A. D., Ferone, C., Messina, F., Colangelo, F., & Cioffi, R. (2014) · Materials · doi:10.3390/ma7085603 · Cited by 81
Ambient Cured Fly Ash Geopolymer Coatings for Concrete
Biondi, L., Perry, M., Vlachakis, C., Wu, Z., Hamilton, A., & McAlorum, J. (2019) · Materials · doi:10.3390/ma12060923 · Cited by 81
Performance evaluation of metakaolin geopolymer modified by different solid wastes
Bai, T., Song, Z., Wang, H., Wu, Y., & Huang, W. R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.093 · Cited by 77
Self-citationFacile preparation of slag or fly ash geopolymer composite coatings with flame resistance
Wang, Y., & Zhao, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.097 · Cited by 76
Strength and microstructure of water treatment residue-based geopolymers containing heavy metals
Waijarean, N., Asavapisit, S., & Sombatsompop, K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.08.047 · Cited by 75
Adak, D., Sarkar, M., Maiti, M., Tamang, A., Mandal, S., & Chattopadhyay, B. (2015) · RSC Advances · doi:10.1039/c5ra12776a · Cited by 73
Lemougna, P. N., Melo, U. F. C., Delplancke, M., & Rahier, H. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.089 · Cited by 67
Provis, J. L., & van Deventer, J. S. J. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0548-z · Cited by 64
Effect of Nano-Clay on Alkali Activated Water-Cooled Slag Geopolymer
Khater, H. M. M. (2013) · British Journal of Applied Science & Technology · doi:10.9734/bjast/2013/2690 · Cited by 64
Production of geopolymer composites enhanced by nano-kaolin material
Hassaan, M. M., Khater, H. M. M., El-Mahllawy, M. S., & Nagar, A. M. E. (2015) · Journal of Advanced Ceramics · doi:10.1007/s40145-015-0156-y · Cited by 60
Direct piezoelectric effect in geopolymeric mortars
Lamuta, C., Candamano, S., Crea, F., & Pagnotta, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.108 · Cited by 60
Nasvi, M. C. M., Rathnaweera, T. D., & Padmanabhan, E. (2016) · Geomechanics and Geophysics for Geo-Energy and Geo-Resources · doi:10.1007/s40948-016-0034-2 · Cited by 57
Huang, Y., Gong, L., Pan, Y., Li, C., Zhou, T., & Cheng, X. (2018) · RSC Advances · doi:10.1039/c7ra12041a · Cited by 56
Burciaga-Díaz, O., Escalante-Garcia, J. I., & Gorokhovsky, A. V. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.08.001 · Cited by 54
Mechanical and Durability Performance of Novel Self-activating Geopolymer Mortars
Cheah, C. B., Ken, P. W., & Ramli, M. B. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.01.374 · Cited by 53
Properties of fly ash and metakaolín based geopolymer panels under fire resistance tests
Galiano, Y. L., Cornejo, A., Leiva, C., Vilches, L. F., & Fernández‐Pereira, C. (2015) · Materiales de Construcción · doi:10.3989/mc.2015.06114 · Cited by 52
Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
Bong, S. H., Nematollahi, B., Nazari, A., et al. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_1 · Cited by 52
Falah, M., MacKenzie, K. J. D., Hanna, J. V., & Page, S. J. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9295-3 · Cited by 50
Sun, S., Lin, J., Zhang, J., et al. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.068 · Cited by 50
Reduction/immobilization processes of hexavalent chromium using metakaolin-based geopolymer
Chen, J., Wang, Y., Zhou, S., et al. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.11.028 · Cited by 46
Strain Hardening Behavior of Engineered Geopolymer Composites: Effects of the Activator Combination
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2015) · Journal of the Australian Ceramic Society · Cited by 45
Xia, M., Nematollahi, B., & Sanjayan, J. (2018) · Materials science forum · doi:10.4028/www.scientific.net/msf.939.177 · Cited by 43
Solid-state NMR study of geopolymer prepared by sol–gel chemistry
Tsai, Y., Hanna, J. V., Lee, Y., Smith, M. E., & Chan, J. C. C. (2010) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2010.10.008 · Cited by 41
Chen, J., Wang, Y., Wang, H., et al. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.03.038 · Cited by 38
Self-citationXia, M., Nematollahi, B., & Sanjayan, J. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_23 · Cited by 35
Superhigh strength of geopolymer with the addition of polyphosphate
Wu, Y., Sui-Sui, X., Zhang, Y., Du, F., & Cheng, C. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.11.020 · Cited by 22
Self-citationExperimental and numerical prototyping of a complex cement column formwork for construction
Dakhli, Z., & Lafhaj, Z. (2016) · Architectural Engineering and Design Management · doi:10.1080/17452007.2016.1226745 · Cited by 15
Cited by
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Zhang, C., Khorshidi, H., Najafi, E., & Ghasemi, M. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135390 · Cited by 300
Pathways towards sustainable concrete
Coffetti, D., Crotti, E., Gazzaniga, G., Carrara, M., Pastore, T., & Coppola, L. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106718 · Cited by 274
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Yu, X.-Q., Zhang, M., Li, C.-Y., Hayano, K., & Kang, X. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2024.e03261 · Cited by 47
Metadata
- Authors
- Wu, Y., Lu, B., Bai, T., Wang, H., Du, F., Zhang, Y., Cai, L., Jiang, C., & Wang, W.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 224
- Pages
- 930-949
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2963441083
- Cited by
- 390
- References
- 137
- FWCI
- 21.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.