The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Use of carbide slag from acetylene industry for activation of ground granulated blast-furnace slag
Abstract
Abstract This study investigates the use of carbide slag (CS), an industrial by-product generated in acetylene production, as a potential alternative to hydrated lime (HL) for activation of ground granulated blast-furnace slag (GGBS), another industrial by-product generated during the process of iron production. Specimens of CS-GGBS and HL-GGBS pastes with different CS or HL contents were prepared and cured for different periods, and then tested for compressive strength. X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) were also used to investigate the hydration characteristics of CS-GGBS. The results indicated that CS-GGBS yielded similar compressive strength as HL-GGBS with the same CS/HL content at the same curing periods of 28 and 56 days, i.e. CS could replace HL to activate GGBS, which would result in both environmental and economic benefits. The Ca(OH)2 in CS accelerated the hydration of GGBS, and hence more hydration products were produced. However, excessive CS addition would decrease the GGBS content and increase crystal calcium hydroxide in the matrix, causing strength decrease. Hence, there was an optimum CS/HL content to achieve the highest compressive strength, which was 10% for 7 days and 5% for 28 and 56 days.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Influence of limestone on the hydration of Portland cements
Lothenbach, B., Le Saout, G., Gallucci, E., & Scrivener, K. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.01.002 · Cited by 1,699
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
A model for the C-A-S-H gel formed in alkali-activated slag cements
Puertas, F., Palacios, M., Manzano, H., Dolado, J. S., Rico, A., & Rodríguez, J. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.04.036 · Cited by 898
Taylor, H. F. W., Famy, C., & Scrivener, K. L. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00466-5 · Cited by 779
Resistance of alkali-activated slag concrete to acid attack
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00125-x · Cited by 586
Kim, M. S., Jun, Y., Lee, C., & Oh, J. E. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.09.011 · Cited by 518
Oh, J. E., Monteiro, P. J. M., Jun, S. S., Choi, S., & Clark, S. M. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.010 · Cited by 507
Fernández‐Jiménez, A., Puertas, F., Sobrados, I., & Sanz, J. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03481.x · Cited by 481
Alkali-Activated Cements and Concretes
Shi, C., Roy, D. M., & Krivenko, P. V. (2003) · CRC Press eBooks · doi:10.1201/9781482266900 · Cited by 455
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Shi, Y., Zhao, Q., Xue, C., Jia, Y., Guo, W., Zhang, Y., & Qiu, Y. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.104999 · Cited by 296
Wang, H., Jiang, M., Cao, B., Wang, F., & Xu, J. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.138490 · Cited by 29
Gu, X., Wang, X., Ge, X., Wang, S., Hu, Z., Wang, H., Liu, J., Zhang, X., & Wang, X. (2025) · Environmental Research · doi:10.1016/j.envres.2025.122309 · Cited by 24
Feng, Y., Li, F., Qi, W., Ren, Q., Qi, W., Duan, G., Zheng, K., Han, Y., & Pang, H. (2022) · Minerals · doi:10.3390/min12121549 · Cited by 20
Metadata
- Authors
- Li, W., & Yi, Y.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 238
- Pages
- 117713
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2992225265
- Cited by
- 280
- References
- 57
- FWCI
- 10.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Use of carbide slag from acetylene industry for activation of ground granulated blast-furnace slag. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2019.117713
- The paper
- Li, W., & Yi, Y. (2020). Use of carbide slag from acetylene industry for activation of ground granulated blast-furnace slag. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.117713
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.