The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Use of carbide slag from acetylene industry for activation of ground granulated blast-furnace slag
Abstract
This study investigates the use of carbide slag (CS), an industrial by-product generated in acetylene production, as a potential alternative to hydrated lime (HL) for activation of ground granulated blast-furnace slag (GGBS), another industrial by-product generated during the process of iron production. Specimens of CS-GGBS and HL-GGBS pastes with different CS or HL contents were prepared and cured for different periods, and then tested for compressive strength. X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) were also used to investigate the hydration characteristics of CS-GGBS. The results indicated that CS-GGBS yielded similar compressive strength as HL-GGBS with the same CS/HL content at the same curing periods of 28 and 56 days, i.e. CS could replace HL to activate GGBS, which would result in both environmental and economic benefits. The Ca(OH)2 in CS accelerated the hydration of GGBS, and hence more hydration products were produced. However, excessive CS addition would decrease the GGBS content and increase crystal calcium hydroxide in the matrix, causing strength decrease. Hence, there was an optimum CS/HL content to achieve the highest compressive strength, which was 10% for 7 days and 5% for 28 and 56 days.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Influence of limestone on the hydration of Portland cements
Lothenbach, B., Le Saout, G., Gallucci, E., & Scrivener, K. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.01.002 · Cited by 1,699
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
A model for the C-A-S-H gel formed in alkali-activated slag cements
Puertas, F., Palacios, M., Manzano, H., Dolado, J. S., Rico, A., & Rodríguez, J. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.04.036 · Cited by 898
Taylor, H. F. W., Famy, C., & Scrivener, K. L. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00466-5 · Cited by 779
Resistance of alkali-activated slag concrete to acid attack
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00125-x · Cited by 586
Oh, J. E., Monteiro, P. J. M., Jun, S. S., Choi, S., & Clark, S. M. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.010 · Cited by 535
Kim, M. S., Jun, Y., Lee, C., & Oh, J. E. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.09.011 · Cited by 518
Fernández‐Jiménez, A., Puertas, F., Sobrados, I., & Sanz, J. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03481.x · Cited by 481
Alkali-Activated Cements and Concretes
Shi, C., Roy, D. M., & Krivenko, P. V. (2003) · CRC Press eBooks · doi:10.1201/9781482266900 · Cited by 455
Abdalqader, A. F., Jin, F., & Al-Tabbaa, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.010 · Cited by 444
Schöler, A., Lothenbach, B., Winnefeld, F., & Zajac, M. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.10.001 · Cited by 422
Low carbon and low embodied energy materials in buildings: A review
Cabeza, L. F., Barreneche, C., Miró, L., Morera, J. M., Bartolí, E., & Inés Fernández, A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.017 · Cited by 417
Bernal, S. A., Rodríguez, E. D., Mejía de Gutiérrez, R., Gordillo, M., & Provis, J. L. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5490-z · Cited by 414
Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres
Puertas, F., Amat, T., Fernández‐Jiménez, A., & Vázquez, T. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00222-9 · Cited by 406
Workability and mechanical properties of alkali activated slag concrete
Collins, F. G., & Sanjayan, J. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00236-1 · Cited by 400
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.04.011 · Cited by 387
Hydration of alkali-activated ground granulated blast furnace slag
Song, S., Sohn, D., Jennings, H. M., & Mason, T. O. (2000) · Journal of Materials Science · doi:10.1023/a:1004742027117 · Cited by 363
Analysis of the system 3CaO·Al2O3–CaSO4·2H2O–CaCO3–H2O by FT-IR spectroscopy
Trezza, M. A., & Lavat, A. E. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00502-6 · Cited by 362
Hydration and properties of sodium sulfate activated slag
Rashad, A. M., Bai, Y., Basheer, P. A. M., Milestone, N. B., & Collier, N. C. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.12.010 · Cited by 335
Strength and drying shrinkage of reactive MgO modified alkali-activated slag paste
Jin, F., Gu, K., & Al-Tabbaa, A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.10.081 · Cited by 327
Jin, F., Gu, K., & Al-Tabbaa, A. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.10.007 · Cited by 325
Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review
Sumesh, M., Alengaram, U. J., Jumaat, M. Z., Mo, K. H., & Alnahhal, M. F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.206 · Cited by 315
FT-IR and XRD analysis of natural Na-bentonite and Cu(II)-loaded Na-bentonite
Zhirong, L., Azhar Uddin, M., & Zhanxue, S. (2011) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2011.04.013 · Cited by 268
Engineering properties of unfired clay masonry bricks
Oti, J. E., Kinuthia, J. M., & Bai, J. (2009) · Engineering Geology · doi:10.1016/j.enggeo.2009.05.002 · Cited by 243
Use of iron and steel industry by-product (GGBS) in cement paste and mortar
Siddique, R., & Bennacer, R. (2012) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2012.09.002 · Cited by 240
Viczián, I. (2013) · Central European Geology · doi:10.1556/ceugeol.56.2013.4.6 · Cited by 232
Durability of concrete incorporating GGBS activated by water-glass
Al-Otaibi, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.07.023 · Cited by 199
Roy, D. M., Jiang, W., & Silsbee, M. R. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00406-3 · Cited by 180
Jeong, Y., Park, H., Jun, Y., Jeong, J. H., & Oh, J. E. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.06.005 · Cited by 160
Jeong, Y., Oh, J. E., Jun, Y., Park, J., Ha, J.-H., & Sohn, S. G. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.10.007 · Cited by 143
The effects of elevated temperature on cement paste containing GGBFS
Wang, H. Y. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.12.003 · Cited by 141
Krammart, P., & Tangtermsirikul, S. (2004) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2004.04.014 · Cited by 140
Park, H., Jeong, Y., Jun, Y., Jeong, J.-H., & Oh, J. E. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.02.008 · Cited by 140
Yang, K., Cho, A.-R., & Song, J. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.10.062 · Cited by 138
Investigations on mix design of tungsten mine waste geopolymeric binder
Pacheco-Torgal, F., Castro-Gomes, J. P., & Jalali, S. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.07.015 · Cited by 136
Properties and microstructure of GGBS–magnesia pastes
Yi, Y., Líška, M., & Al‐Tabbaa, A. (2013) · Advances in Cement Research · doi:10.1680/adcr.13.00005 · Cited by 132
Self-citationJeong, Y., Hargis, C. W., Chun, S.-C., & Moon, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.153 · Cited by 131
Carbide lime and industrial hydrated lime characterization
Cardoso, F. A., Cordon, H. C. F., Pileggi, R. G., Cincotto, M. A., & John, V. M. (2009) · Powder Technology · doi:10.1016/j.powtec.2009.05.017 · Cited by 128
Chemical activation of blended cements made with lime and natural pozzolans
Shi, C., & Day, R. L. (1993) · Cement and Concrete Research · doi:10.1016/0008-8846(93)90076-l · Cited by 122
Obuzor, G. N., Kinuthia, J. M., & Robinson, R. B. (2012) · Engineering Geology · doi:10.1016/j.enggeo.2012.09.010 · Cited by 121
López, T., Bosch, P., Asomoza, M., Gómez, R., & Ramos, E. (1997) · Materials Letters · doi:10.1016/s0167-577x(96)00296-0 · Cited by 121
Ettringite decomposition in the presence of barium carbonate
Carmona‐Quiroga, P. M., & Blanco‐Varela, M. T. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.05.021 · Cited by 121
CO2 capture by carbide slag from chlor-alkali plant in calcination/carbonation cycles
Li, Y., Sun, R., Liu, C., Liu, H., & Lu, C. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.03.012 · Cited by 117
Evaluation of the environmental performance of lime production in Cuba
Gutiérrez, A. S., Caneghem, J. V., Martínez, J. B. C., & Vandecasteele, C. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.02.035 · Cited by 115
Meng, J., Zhong, L., Wang, L., Liu, X., Tang, C., Chen, H., & Xu, J. M. (2018) · Environmental Science and Pollution Research · doi:10.1007/s11356-017-1148-y · Cited by 111
Differential scanning calorimetry study of hydrated ground granulated blast-furnace slag
Sha, W., & Pereira, G. B. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00472-5 · Cited by 99
Fernández, L., Alonso, C., Hidalgo, A., & Andrade, C. (2005) · Advances in Cement Research · doi:10.1680/adcr.2005.17.1.9 · Cited by 96
Jeong, Y., Yum, W. S., Moon, J., & Oh, J. E. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.097 · Cited by 58
Cleaner production in a small lime factory by means of process control
George, P. A. O., Gutiérrez, A. S., Martínez, J. B. C., & Vandecasteele, C. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.03.019 · Cited by 53
Discovery of impurities existing state in carbide slag by chemical dissociation
Yang, H. S., Cao, J., Wang, Z., Chen, H., & Gong, X. (2014) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2014.05.003 · Cited by 45
Use of red gypsum in soil mixing engineering applications
Hughes, P., Glendinning, S., Manning, D. A. C., & White, M. L. (2011) · Proceedings of the Institution of Civil Engineers - Geotechnical Engineering · doi:10.1680/geng.10.00061 · Cited by 43
Park, H., Jeong, Y., Jeong, J.-H., & Oh, J. E. (2016) · Materials · doi:10.3390/ma9030185 · Cited by 35
Yum, W. S., Jeong, Y., Song, H., & Oh, J. E. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.112 · Cited by 34
Zhang, J., Wang, Z., Li, T., Wang, Z., Zhang, S., Zhong, M., Liu, Y., & Gong, X. (2018) · Waste Management · doi:10.1016/j.wasman.2018.11.033 · Cited by 32
Properties of Alkali-Activated Slag Paste Using New Colloidal Nano-Silica Mixing Method
Kim, T., Kim, J. H., & Jun, Y. (2019) · Materials · doi:10.3390/ma12091571 · Cited by 25
Deciphering the Sulfate Attack of Cementitious Materials by High-Resolution Micro-X-ray Diffraction
Schlegel, M., Mueller, U., Panne, U., & Emmerling, F. (2011) · Analytical Chemistry · doi:10.1021/ac200181g · Cited by 16
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Shi, Y., Zhao, Q., Xue, C., Jia, Y., Guo, W., Zhang, Y., & Qiu, Y. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.104999 · Cited by 296
Wang, H., Jiang, M., Cao, B., Wang, F., & Xu, J. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.138490 · Cited by 29
Gu, X., Wang, X., Ge, X., Wang, S., Hu, Z., Wang, H., Liu, J., Zhang, X., & Wang, X. (2025) · Environmental Research · doi:10.1016/j.envres.2025.122309 · Cited by 24
Feng, Y., Li, F., Qi, W., Ren, Q., Qi, W., Duan, G., Zheng, K., Han, Y., & Pang, H. (2022) · Minerals · doi:10.3390/min12121549 · Cited by 20
Metadata
- Authors
- Li, W., & Yi, Y.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 238
- Pages
- 117713
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2992225265
- Cited by
- 280
- References
- 57
- FWCI
- 10.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.