The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Performance comparison of cement replacing materials in concrete: Limestone fillers and supplementary cementing materials – A review
Abstract
Abstract Using supplementary cementing materials (SCMs) as cement replacing materials is common practice in the construction industry to achieve more durable concrete and less CO2 emissions associated with producing concrete materials. The use of finely ground limestone filler (LF) as a cement replacing material is also becoming a widely considered option, partly because of the limited availability of SCMs in some geographic regions. This study provides a comprehensive review based on published literature on the properties of cement-based materials (paste, mortar and concrete) containing limestone filler compared to the properties and performance of cement-based materials containing SCMs (fly ash, slag cement, silica fume or metakaolin). The properties that are examined include early age hydration, mechanical properties, permeability, durability and environmental impacts. At replacement levels up to 10%, concrete or mortar containing LF exhibits similar properties to that of control mix without any cement replacing material. The cementitious and pozzolanic properties of SCMs permit higher cement replacement levels (>10%) which can achieve equivalent or superior properties and durability performance than conventional Portland cement concrete. Based on the available literature, concrete containing LF can exhibit a similar effect as SCMs on reducing global warming potential of the cement-based materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
Influence of limestone on the hydration of Portland cements
Lothenbach, B., Le Saout, G., Gallucci, E., & Scrivener, K. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.01.002 · Cited by 1,699
Global strategies and potentials to curb CO2 emissions in cement industry
Benhelal, E., Zahedi, G., Shamsaei, E., & Bahadori, A. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.10.049 · Cited by 1,580
Advances in understanding hydration of Portland cement
Scrivener, K. L., Juilland, P., & Monteiro, P. J. M. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.025 · Cited by 1,319
Supplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
Recent advances in understanding the role of supplementary cementitious materials in concrete
Juenger, M. C. G., & Siddique, R. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.03.018 · Cited by 1,229
Influence of metakaolin on the properties of mortar and concrete: A review
Siddique, R., & Klaus, J. (2008) · Applied Clay Science · doi:10.1016/j.clay.2008.11.007 · Cited by 944
Understanding the Filler Effect on the Nucleation and Growth of C‐S‐H
Berodier, E., & Scrivener, K. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13177 · Cited by 882
Hemalatha, T., & Ramaswamy, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.114 · Cited by 822
Utilization and efficiency of ground granulated blast furnace slag on concrete properties – A review
Özbay, E., Erdemir, M., & Durmuş, H. İ. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.153 · Cited by 800
Effect of silica fume on mechanical properties of high-strength concrete
Mazloom, M., Ramezanianpour, A. A., & Brooks, J. J. (2004) · Cement and Concrete Composites · doi:10.1016/s0958-9465(03)00017-9 · Cited by 752
Utilization of silica fume in concrete: Review of hardened properties
Siddique, R. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.06.012 · Cited by 662
Effect of fly ash fineness on compressive strength and pore size of blended cement paste
Chindaprasirt, P., Jaturapitakkul, C., & Sinsiri, T. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.07.003 · Cited by 612
Effect of constituents on rheological properties of fresh concrete-A review
Jiao, D., Shi, C., Yuan, Q., An, X., Liu, Y., & Li, H. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.07.016 · Cited by 583
Celik, K., Meral, C., Petek Gursel, A., Mehta, P. K., Horvath, A., & Monteiro, P. J. M. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.003 · Cited by 463
Zhao, H., Sun, W., Wu, X., & Gao, B. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.050 · Cited by 433
Chindaprasirt, P., & Rukzon, S. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.06.010 · Cited by 430
A study on high strength concrete prepared with large volumes of low calcium fly ash
Poon, C. S., Lam, L., & Wong, Y. L. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00271-9 · Cited by 410
A study on carbonation depth prediction for fly ash concrete
Khunthongkeaw, J., Tangtermsirikul, S., & Leelawat, T. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.01.052 · Cited by 376
Utilization of silica fume in concrete: Review of durability properties
Khan, M. I., & Siddique, R. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.09.016 · Cited by 373
Kurad, R., Silvestre, J. D., de Brito, J., & Ahmed, H. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.236 · Cited by 357
Effect of metakaolin on creep and shrinkage of concrete
Brooks, J. J., & Johari, M. A. M. (2001) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00095-0 · Cited by 356
Influence of silica fume on the tensile strength of concrete
Bhanja, S., & Sengupta, B. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.024 · Cited by 352
The effect of fly ash composition on the expansion of concrete due to alkali–silica reaction
Shehata, M. H., & Thomas, M. D. A. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00283-0 · Cited by 335
Ramezanianpour, A. A., Ghiasvand, E., Nickseresht, I., Mahdikhani, M., & Moodi, F. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.08.003 · Cited by 314
Properties of Metakaolin blended cements
Ambroise, J., Maximilien, S., & Pera, J. (1994) · Advanced Cement Based Materials · doi:10.1016/1065-7355(94)90007-8 · Cited by 275
Teixeira, E. R., Mateus, R., Camões, A. F., Bragança, L., & Branco, F. G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.124 · Cited by 271
Increasing concrete durability with high-reactivity metakaolin
Gruber, K. A., Ramlochan, T., Boddy, A., Hooton, R. D., & Thomas, M. D. (2001) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00097-4 · Cited by 260
Miller, S. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.008 · Cited by 259
Ellis, L. D., Badel, A. F., Chiang, M. L., Park, R. J.-Y., & Chiang, Y.-M. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1821673116 · Cited by 258
Limestone and silica powder replacements for cement: Early-age performance
Bentz, D. P., Ferraris, C. F., Jones, S. Z., Lootens, D., & Zunino, F. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.001 · Cited by 255
Valipour, M., Pargar, F., Shekarchi, M., & Khani, S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.11.054 · Cited by 254
Impact of silica fume, fly ash, and metakaolin on the thickness and strength of the ITZ in concrete
Nežerka, V., Bílý, P., Hrbek, V., & Fládr, J. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.05.012 · Cited by 249
Effect of metakaolin and silica fume on the durability of self-consolidating concrete
Hassan, A. A. A., Lachemi, M., & Hossain, K. M. A. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.02.013 · Cited by 248
Gruyaert, E., Van den Heede, P., & De Belie, N. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.08.024 · Cited by 244
Hooton, R. D. (1993) · ACI Materials Journal · doi:10.14359/4009 · Cited by 234
A comparative cradle-to-gate life cycle assessment of three concrete mix designs
Tait, M. W., & Cheung, W. M. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1045-5 · Cited by 234
Durability of the Ultra High Performances Concrete containing metakaolin
Tafraoui, A., Escadeillas, G., & Vidal, T. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.169 · Cited by 231
(2019) · De Gruyter eBooks · doi:10.1515/9783110572100-002 · Cited by 231
Supplementary Cementing Materials in Concrete
Thomas, M. D. (2013) · CRC Press eBooks · doi:10.1201/b14493 · Cited by 223
The permeability of Portland limestone cement concrete
Tsivilis, S. G., Tsantilas, J., Kakali, G., Chaniotakis, E., & Sakellariou, A. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00092-9 · Cited by 220
Wu, B., & Ye, G. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.176 · Cited by 214
Shehata, M. H., & Thomas, M. D. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00680-9 · Cited by 213
Thongsanitgarn, P., Wongkeo, W., Chaipanich, A., & Poon, C. S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.060 · Cited by 192
(2018) · RILEM State-of-the-Art Reports · doi:10.1007/978-3-319-70606-1 · Cited by 189
Güneyisi, E., & Gesoğlu, M. (2008) · Materials and Structures · doi:10.1617/s11527-007-9260-y · Cited by 180
Performance of high-volume fly ash concrete in marine environment
Moffatt, E. G., Thomas, M. D. A., & Fahim, A. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.09.008 · Cited by 174
THE USE OF LIMESTONE IN PORTLAND CEMENT: A STATE-OF-THE-ART REVIEW
Detwiler, R. J., & Tennis, P. (1996) · Cited by 172
Hydration heat kinetics of concrete with silica fume
Kadri, E.-H., & Duval, R. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.06.008 · Cited by 159
Effect of curing time on granulated blast-furnace slag cement mortars carbonation
Sanjuán, M. Á., Estévez, E., Argiz, C., & del Barrio, D. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.04.006 · Cited by 156
Compressive strength and sulfate resistance of limestone and/or silica fume mortars
Sezer, G. İ. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.06.064 · Cited by 155
Palm, S., Proske, T., Rezvani, M., Hainer, S., Müller, C., & Graubner, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.009 · Cited by 152
Arora, A., Sant, G., & Neithalath, N. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.179 · Cited by 145
Service life of metakaolin-based concrete exposed to carbonation
Bucher, R., Diederich, P., Escadeillas, G., & Cyr, M. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.04.013 · Cited by 135
Chloride ion diffusivity of fly ash and silica fume concretes exposed to freeze–thaw cycles
Chung, C.-W., Shon, C.-S., & Kim, Y.-S. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.02.015 · Cited by 133
Carbonation-induced reinforcement corrosion in silica fume concrete
Kulakowski, M. P., Pereira, F. M., & Molin, D. C. C. D. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.08.005 · Cited by 132
Activation energies of high-volume fly ash ternary blends: Hydration and setting
Bentz, D. P. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.06.018 · Cited by 131
Yu, Z., Ni, C., Tang, M., & Shen, X. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.147 · Cited by 131
Effects of micro-environmental climate on the carbonation depth and the pH value in fly ash concrete
Lu, C., Wang, W., Li, Q.-T., Hao, M., & Xu, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.155 · Cited by 121
Aqel, M. A., & Panesar, D. K. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.031 · Cited by 115
Self-citationEffect of transportation of fly ash: Life cycle assessment and life cycle cost analysis of concrete
Panesar, D. K., Kanraj, D., & Abualrous, Y. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.019 · Cited by 115
Self-citationHydration heat of slag or fly ash in the composite binder at different temperatures
Han, F., He, X., Zhang, Z., & Liu, J. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.07.002 · Cited by 113
Concrete mixture proportioning for desired strength and reduced global warming potential
Miller, S. A., Monteiro, P. J. M., Ostertag, C. P., & Horvath, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.081 · Cited by 91
Hafez, H., Kurda, R., Cheung, W. M., & Nagaratnam, B. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118722 · Cited by 83
Fly ash particle characterization for predicting concrete compressive strength
Kim, T., Davis, J. M., Ley, M. T., Kang, S., & Amrollahi, P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.059 · Cited by 74
Demirhan, S., Türk, K., & Ulugerger, K. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.111 · Cited by 73
Service life and global warming potential of chloride exposed concrete with high volumes of fly ash
den Heede, P. V., Keersmaecker, M. D., Elia, A., Adriaens, A. G., & Belie, N. D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.03.020 · Cited by 64
Early hydration properties of composite binder containing limestone powder with different finenesses
Han, F., Wang, Q., Mutian, L., et al. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-5088-9 · Cited by 46
da Cunha, A. L. C., Gonçalves, J. P., Büchler, P. M., & Dweck, J. (2008) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-007-8749-5 · Cited by 33
Cited by
Wang, R., Hu, Z., Li, Y., Wang, K., & Zhang, H. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126371 · Cited by 410
Deboucha, W., Sebaibi, N., El Mendili, Y., Fabien, A., Alengaram, U. J., Leklou, N., Hamdadou, M. N., Bourdot, A., & Gascoin, S. (2021) · Sustainability · doi:10.3390/su13116504 · Cited by 35
Metadata
- Authors
- Panesar, D. K., & Zhang, R.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 251
- Pages
- 118866
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3016718509
- Cited by
- 283
- References
- 69
- FWCI
- 18.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.