A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Open accessThe DOI matches its Crossref record; 154 of the 154 references it cites were found in a registry or an index.
Abstract
Alkali-activated materials (AAM) are known to be environmentally friendly alternatives to cement-based materials because they can potentially reduce greenhouse gas emissions and reutilize industrial by-products/wastes. To study the factors influencing the strength of slag based alkali-activated materials (BFS-AAM), fly ash based alkali-activated materials (FA-AAM), slag, and fly ash-based alkali-activated materials (BFS/FA-AAM), and clarifying their reaction mechanisms, this paper reviews current knowledge about the mechanical properties and the reaction mechanisms of BFS-AAM, FA-AAM, and BFS/FA-AAM. The precursor requirements and the strength control factors are summarized. The control factors for the strength of BFS/FA-AAM are the BFS/binder ratio, the Na 2 O/binder ratio, the SiO 2 /Na 2 O ratio, and the w/binder ratio. Ion concentrations, determined by these control factors, play a decisive role in the development of strength. Generally, the strength is proportional to the BFS/FA ratio. The optimal values of the Na 2 O/binder ratio of BFS-AAM and FA-AAM are between 5.5% and 8% and between 7 and 10%, respectively. The optimal values of the SiO 2 /Na 2 O ratio of BFS-AAM and FA-AAM are between 0.85 and 1.4 and between 0.6 and 1, respectively. Increasing the w/binder ratio will only benefit workability but will affect the strength negatively. A w/binder ratio of around 0.4 may strike a balance between strength and workability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
THE ATOMIC ARRANGEMENT IN GLASS
Zachariasen, W. H. (1932) · Journal of the American Chemical Society · doi:10.1021/ja01349a006 · Cited by 2,929
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Nath, P., & Sarker, P. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.080 · Cited by 1,557
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Garcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Concrete: Structure, properties and materials
(1986) · International Journal of Cement Composites and Lightweight Concrete · doi:10.1016/0262-5075(86)90055-2 · Cited by 1,350
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
Richardson, I. G. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.11.005 · Cited by 1,262
Composition and microstructure of alkali activated fly ash binder: Effect of the activator
Fernández-Jiménez, A., & Palomo, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.03.003 · Cited by 1,144
A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements
Li, C., Sun, H., & Li, L. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.03.020 · Cited by 1,108
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
The Environmental chemistry of aluminum
(1996) · Choice Reviews Online · doi:10.5860/choice.33-5716 · Cited by 949
Deb, P. S., Nath, P., & Sarker, P. K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.001 · Cited by 941
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.002 · Cited by 914
Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.044 · Cited by 907
Fly Ash-Based Geopolymer Concrete
Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., & Rangan, B. V. (2005) · Australian Journal of Structural Engineering · doi:10.1080/13287982.2005.11464946 · Cited by 885
Microstructure development of alkali-activated fly ash cement: a descriptive model
Fernández-Jiménez, A., Palomo, A., & Criado, M. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.08.021 · Cited by 875
Kumar, S., Kumar, R., & Mehrotra, S. P. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3934-5 · Cited by 807
Lee, N. K., & Lee, H. K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.107 · Cited by 754
Factors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716
Sodium silicate-based, alkali-activated slag mortars
Brough, A. R., & Atkinson, A. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00717-2 · Cited by 694
Characterisation of fly ashes. Potential reactivity as alkaline cements☆
Fernández-Jiménez, A., & Palomo, A. (2003) · Fuel · doi:10.1016/s0016-2361(03)00194-7 · Cited by 690
Handbook of Alkali-Activated Cements, Mortars and Concretes
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16511-7 · Cited by 688
Designing Precursors for Geopolymer Cements
Duxson, P., & Provis, J. L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02787.x · Cited by 662
Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar
Duran Atiş, C., Bilim, C., Çelik, Ö., & Karahan, O. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.011 · Cited by 658
The role played by the reactive alumina content in the alkaline activation of fly ashes
Fernández-Jiménez, A., Palomo, A., Sobrados, I., & Sanz, J. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.11.015 · Cited by 590
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.08.005 · Cited by 580
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Brice, D. G., Kilcullen, A. R., Hamdan, S., & van Deventer, J. S. J. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.07.106 · Cited by 544
Fang, G., Ho, W. K., Tu, W., & Zhang, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.008 · Cited by 528
Engineering properties of inorganic polymer concretes (IPCs)
Sofi, M., van Deventer, J. S. J., Mendis, P. A., & Lukey, G. C. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.008 · Cited by 522
A review on alkaline activation: New analytical perspectives
Palomo, A., Krivenko, P., Garcia-Lodeiro, I., Kavalerova, E., Maltseva, O., & Fernández-Jiménez, A. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.00314 · Cited by 501
Oelkers, E. H., & Gislason, S. R. (2001) · Geochimica et Cosmochimica Acta · doi:10.1016/s0016-7037(01)00664-0 · Cited by 498
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Brice, D. G. (2010) · Waste and Biomass Valorization · doi:10.1007/s12649-010-9015-9 · Cited by 494
Fernández‐Jiménez, A., Puertas, F., Sobrados, I., & Sanz, J. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03481.x · Cited by 481
Engineering Properties of Alkali-Activated Fly Ash Concrete
(2006) · ACI Materials Journal · doi:10.14359/15261 · Cited by 476
Efflorescence control in geopolymer binders based on natural pozzolan
Najafi Kani, E., Allahverdi, A., & Provis, J. L. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.07.007 · Cited by 476
Alkali-activated slag cement and concrete: a review of properties and problems
Wang, S.-D., Pu, X.-C., Scrivener, K. L., & Pratt, P. L. (1995) · Advances in Cement Research · doi:10.1680/adcr.1995.7.27.93 · Cited by 474
Effect of Alkali Cations on Aluminum Incorporation in Geopolymeric Gels
Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0494216 · Cited by 470
A calorimetric study of early hydration of alkali-slag cements
Shi, C., & Day, R. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00126-w · Cited by 468
Alkaline Activation of Fly Ashes: NMR Study of the Reaction Products
Palomo, Á., Alonso, S., Fernandez‐Jiménez, A., Sobrados, I., & Sanz, J. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2004.01141.x · Cited by 463
Gao, X., Yu, Q., & Brouwers, H. J. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.065 · Cited by 459
Alkali-Activated Cements and Concretes
Shi, C., Roy, D. M., & Krivenko, P. V. (2003) · CRC Press eBooks · doi:10.1201/9781482266900 · Cited by 455
Richardson, I. G., Brough, A. R., Groves, G. W., & Dobson, C. M. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90002-7 · Cited by 449
Effects of dosage and modulus of water glass on early hydration of alkali–slag cements
Krizan, D., & Zivanovic, B. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00717-7 · Cited by 444
Geopolymerisation of multiple minerals
Xu, H., & Van Deventer, J. S. J. (2002) · Minerals Engineering · doi:10.1016/s0892-6875(02)00255-8 · Cited by 434
Effect of the Alkali Metal Activator on the Properties of Fly Ash-Based Geopolymers
van Jaarsveld, J. G. S., & van Deventer, J. S. J. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980804b · Cited by 432
The characterisation of source materials in fly ash-based geopolymers
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)00971-0 · Cited by 416
Puertas, F., Fernández-Jiménez, A., & Blanco-Varela, M. T. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00254-0 · Cited by 409
Structural reorganisation of class F fly ash in alkaline silicate solutions
Lee, W. K. W., & van Deventer, J. S. J. (2002) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00237-6 · Cited by 398
Very early-age reaction kinetics and microstructural development in alkali-activated slag
Gebregziabiher, B. S., Thomas, R., & Peethamparan, S. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.001 · Cited by 393
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.04.011 · Cited by 387
Saha, S., & Rajasekaran, C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.139 · Cited by 380
Mechanical Properties of Fly-Ash-Based Geopolymer Concrete
(2011) · ACI Materials Journal · doi:10.14359/51682495 · Cited by 377
Palacios, M., & Puertas, F. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.11.021 · Cited by 362
A review on mixture design methods for geopolymer concrete
Li, N., Shi, C., Zhang, Z., Wang, H., & Liu, Y. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107490 · Cited by 351
A study on the setting characteristics of sodium silicate-activated slag pastes
Chang, J. J. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01096-7 · Cited by 330
29Si and 27Al NMR study of alkali-activated slag
Wang, S.-D., & Scrivener, K. L. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01044-x · Cited by 328
Factors influencing the compressive strength of fly ash based geopolymers
Soutsos, M. N., Boyle, A. P., Vinai, R., Hadjierakleous, A., & Barnett, S. J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.045 · Cited by 326
Geopolymerisation kinetics. 2. Reaction kinetic modelling
Provis, J. L., & van Deventer, J. S. J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.01.028 · Cited by 323
Phair, J. W., & Van Deventer, J. S. J. (2001) · Minerals Engineering · doi:10.1016/s0892-6875(01)00002-4 · Cited by 322
Isothermal calorimetry and in-situ XRD study of the NaOH activated fly ash, metakaolin and slag
Sun, Z., & Vollpracht, A. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.004 · Cited by 320
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
Jang, J. G., Lee, N. K., & Lee, H. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.048 · Cited by 318
Microcracking and strength development of alkali activated slag concrete
Collins, F., & Sanjayan, J. G. (2001) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00003-8 · Cited by 316
Multiscale micromechanical analysis of alkali-activated fly ash-slag paste
Fang, G., & Zhang, M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106141 · Cited by 292
Reactivity and reaction products of alkali-activated, fly ash/slag paste
Lee, N. K., & Lee, H. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.022 · Cited by 284
Hydration Products and Reactivity of Blast‐Furnace Slag Activated by Various Alkalis
Escalante‐García, J. I., Fuentes, A. F., Gorokhovsky, A., Fraire‐Luna, P. E., & Mendoza‐Suarez, G. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03623.x · Cited by 284
Quantitative study of the reactivity of fly ash in geopolymerization by FTIR
Zhang, Z., Wang, H., & Provis, J. L. (2012) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2012.752620 · Cited by 282
Pore solution composition of alkali-activated slag/fly ash pastes
Zuo, Y., Nedeljković, M., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.010 · Cited by 274
Self-citationWinnefeld, F., Leemann, A., Lucuk, M., Svoboda, P., & Neuroth, M. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.11.007 · Cited by 268
The interrelationship between surface chemistry and rheology in alkali activated slag paste
Kashani, A., Provis, J. L., Qiao, G. G., & van Deventer, J. S. J. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.127 · Cited by 268
High Tech Concrete: Where Technology and Engineering Meet
Salet, T. A. M., Bos, F. P., Wolfs, R. J. M., Ahmed, Z. Y., Hordijk, D. A., & Luković, M. (2017) · Springer eBooks · doi:10.1007/978-3-319-59471-2 · Cited by 260
Guidelines for mix proportioning of fly ash/GGBS based alkali activated concretes
Rafeet, A., Vinai, R., Soutsos, M., & Sha, W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.036 · Cited by 258
Autogenous shrinkage of alkali activated slag mortars: Basic mechanisms and mitigation methods
Kumarappa, D. B., Peethamparan, S., & Ngami, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.004 · Cited by 257
Rafeet, A., Vinai, R., Soutsos, M., & Sha, W. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.003 · Cited by 254
Comprehensive phase characterization of crystalline and amorphous phases of a Class F fly ash
Chancey, R. T., Stutzman, P., Juenger, M. C. G., & Fowler, D. W. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.029 · Cited by 253
Chithiraputhiran, S., & Neithalath, N. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.03.061 · Cited by 251
Li, N., Shi, C., & Zhang, Z. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.04.024 · Cited by 249
Ravikumar, D., & Neithalath, N. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.03.006 · Cited by 244
Rickard, W. D. A., Williams, R., Temuujin, J., & van Riessen, A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.005 · Cited by 243
Effect of adsorbed alumina on the solubility of amorphous silica in water
Iler, R. K. (1973) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(73)90386-x · Cited by 242
Thermodynamic modelling of alkali-activated slag cements
Myers, R. J., Lothenbach, B., Bernal, S. A., & Provis, J. L. (2015) · Applied Geochemistry · doi:10.1016/j.apgeochem.2015.06.006 · Cited by 240
Li, N., Shi, C., Zhang, Z., Zhu, D., Hwang, H.-J., Zhu, Y., & Sun, T. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.07.009 · Cited by 238
The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars
Xu, H., & van Deventer, J. S. J. (2003) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00499-5 · Cited by 234
Alkali activation of a slag at ambient and elevated temperatures
Altan, E., & Erdoğan, S. T. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.08.003 · Cited by 232
Geopolymerisation kinetics. 1. In situ energy-dispersive X-ray diffractometry
Provis, J. L., & van Deventer, J. S. J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.01.027 · Cited by 224
Shrinkage and strength development of alkali-activated fly ash-slag binary cements
Hojati, M., & Radlińska, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.040 · Cited by 217
Sodium silicate-based alkali-activated slag mortars
Brough, A. R., Holloway, M., Sykes, J., & Atkinson, A. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00356-2 · Cited by 208
Hu, X., Shi, C., Shi, Z., & Zhang, L. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103392 · Cited by 206
Hamilton, J. P., Brantley, S. L., Pantano, C. G., Criscenti, L. J., & Kubicki, J. D. (2001) · Geochimica et Cosmochimica Acta · doi:10.1016/s0016-7037(01)00724-4 · Cited by 204
Fracture properties and microstructure formation of hardened alkali-activated slag/fly ash pastes
Zhang, S., Li, Z., Ghiassi, B., Yin, S., & Ye, G. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106447 · Cited by 199
Self-citationRavikumar, D., & Neithalath, N. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.07.010 · Cited by 191
Present State and Future of Alkali-Activated Slag Concretes
Talling, B., & Brandštetr, J. (1989) · CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete · doi:10.14359/1873 · Cited by 190
The role of surface speciation in the dissolution of albite
Blum, A. E., & Lasaga, A. C. (1991) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(91)90096-n · Cited by 185
Activating solution chemistry for geopolymers
Provis, J. L. (2009) · Geopolymers · doi:10.1533/9781845696382.1.50 · Cited by 184
Oderji, S. Y., Chen, B., Shakya, C., Ahmad, M. R., & Shah, S. F. A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116891 · Cited by 178
Effects of aluminates on the formation of geopolymers
Weng, L., Sagoe‐Crentsil, K., Brown, T., & Song, S. (2004) · Materials Science and Engineering B · doi:10.1016/j.mseb.2004.11.008 · Cited by 176
A preliminary study on the alkali activation of ground granulated blast-furnace slag
Douglas, E., & Brandštetr, J. (1990) · Cement and Concrete Research · doi:10.1016/0008-8846(90)90008-l · Cited by 175
Memon, F. A., Nuruddin, M. F., Khan, S. U., Shafiq, N., & Ayub, T. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 170
The Role of Mathematical Modelling and Gel Chemistry in Advancing Geopolymer Technology
Provis, J. L., Duxson, P., Van Deventer, J. S. J., & Lukey, G. C. (2005) · Chemical Engineering Research and Design · doi:10.1205/cherd.04329 · Cited by 169
Nedeljković, M., Ghiassi, B., van der Laan, S., Li, Z., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.11.011 · Cited by 168
Self-citationA mix design methodology of slag and fly ash-based alkali-activated paste
Sun, B., Sun, Y., Ye, G., & Schutter, G. D. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104368 · Cited by 168
Self-citationNedeljković, M., Li, Z., & Ye, G. (2018) · Materials · doi:10.3390/ma11112121 · Cited by 167
Self-citationHydration of alkali-activated slag: thermodynamic modelling
Lothenbach, B., & Gruskovnjak, A. (2007) · Advances in Cement Research · doi:10.1680/adcr.2007.19.2.81 · Cited by 166
Determining the Reactivity of a Fly Ash for Production of Geopolymer
Chen‐Tan, N. W., Van Riessen, A., LY, C. V., & Southam, D. C. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.02948.x · Cited by 166
Alkali activated slag foams: The effect of the alkali reaction on foam characteristics
Hajimohammadi, A., Ngo, T., Mendis, P. A., Kashani, A., & van Deventer, J. S. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.134 · Cited by 166
Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature
Ding, Y., Shi, C.-J., & Li, N. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.138 · Cited by 165
Microstructure and phase evolution of alkali-activated steel slag during early age
Liu, Z., Zhang, D.-W., LI, L., Wang, J.-X., Shao, N.-N., & Wang, D.-M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.213 · Cited by 163
Fang, G., Bahrami, H., & Zhang, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.155 · Cited by 161
Deir, E., Gebregziabiher, B. S., & Peethamparan, S. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.11.010 · Cited by 157
Luukkοnen, T., Sreenivasan, H., Abdollahnejad, Z., Yliniemi, J., Kantola, A. M., Telkki, V., Kinnunen, P., & Illikainen, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117354 · Cited by 155
Effect of alkali contents, moduli and curing time on engineering properties of alkali activated slag
Fang, S., Lam, S. S. E., Li, B., & Wu, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118799 · Cited by 153
Kinetic study on hydration of alkali-activated slag
Huanhai, Z., Xuequan, W., Xu, Z., & Mingshu, T. (1993) · Cement and Concrete Research · doi:10.1016/0008-8846(93)90062-e · Cited by 151
Dai, X., Aydın, S., Yardımcı, M. Y., Lesage, K., & Schutter, G. D. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120253 · Cited by 141
Ouyang, X., Ma, Y., Liu, Z., Liang, J., & Ye, G. (2019) · Minerals · doi:10.3390/min10010015 · Cited by 138
Self-citationHumad, A. M., Kothari, A., Provis, J. L., & Ćwirzeń, A. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00009 · Cited by 137
Influence of reactivity of fly ash on geopolymerisation
Kumar, S., Kumar, R. R., Alex, T. C., Bandopadhyay, A., & Mehrotra, S. (2007) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/174367607x159293 · Cited by 134
Mitigation of autogenous shrinkage in alkali activated slag mortars by internal curing
Sakulich, A. R., & Bentz, D. P. (2012) · Materials and Structures · doi:10.1617/s11527-012-9978-z · Cited by 134
Yazeli, H. T., Behfarnia, K., & Khalili, M. (2018) · Journal of Advanced Concrete Technology · doi:10.3151/jact.16.293 · Cited by 134
The Viscosity Properties of Sodium Silicate Solutions
Yang, X., Zhu, W., & Yang, Q. J. (2007) · Journal of Solution Chemistry · doi:10.1007/s10953-007-9214-6 · Cited by 132
Investigation on some factors affecting the characteristics of alkali-phosphorus slag cement
Shi, C., & Yinyu, L. (1989) · Cement and Concrete Research · doi:10.1016/0008-8846(89)90004-5 · Cited by 129
Internal curing by superabsorbent polymers in alkali-activated slag
Li, Z., Wyrzykowski, M., Dong, H., Granja, J. L., Azenha, M., Lura, P., & Ye, G. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106123 · Cited by 127
Self-citation12th International Congress on the Chemistry of Cement
(2005) · Advances in Cement Research · doi:10.1680/adcr.17.2.90.65043 · Cited by 127
Modeling Speciation in Highly Concentrated Alkaline Silicate Solutions
Provis, J. L., Duxson, P., Lukey, G. C., Separovic, F., Kriven, W. M., & van Deventer, J. S. J. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050700i · Cited by 123
Palacios, M., Alonso, M. M., Varga, C., & Puertas, F. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.08.010 · Cited by 121
Wang, P. Z., Trettin, R. H. F., & Rudert, V. (2005) · Advances in Cement Research · doi:10.1680/adcr.2005.17.4.161 · Cited by 111
Zeolite Formation in Class F Fly Ash Blended Cement Pastes
LaRosa, J. L., Kwan, S., & Grutzeck, M. W. (1992) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1992.tb04228.x · Cited by 107
ALUMINOSILICATE POLYMERS - INFLUENCE OF ELEVATED TEMPERATURES, EFFLORESCENCE
Kopecký, L., & Alberovská, L. (2009) · Cited by 104
Gopalakrishnan, R., & Chinnaraju, K. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.153 · Cited by 104
Cementos de escorias activadas alcalinamente: Situación actual y perspectivas de futuro
Puertas, F. (1995) · Materiales de Construcción · doi:10.3989/mc.1995.v45.i239.553 · Cited by 98
Nath, S. K., & Kumar, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.174 · Cited by 93
Soluble silicates, their properties and uses
Vail, J. G., & Wills, J. (1952) · Cited by 92
Carbonation Resistance of Alkali-Activated Slag Under Natural and Accelerated Conditions
Nedeljković, M., Zuo, Y., Arbi, K., & Ye, G. (2018) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-018-0166-4 · Cited by 90
Self-citationActivation of Ground Blast‐Furnace Slag by Alkali‐Metal and Alkaline‐Earth Hydroxides
Roy, A., Schilling, P. J., Eaton, H. C., Malone, P. G., Brabston, W. N., & Wakeley, L. D. (1992) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1992.tb04416.x · Cited by 82
Kinetics of fly ash leaching in strongly alkaline solutions
Chen, C., Gong, W., Lutze, W., Pegg, I. L., & Zhai, J. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4997-z · Cited by 80
Alkali-Activated Slag Cement Concrete
Thomas, R. J., Ye, H., Radlińska, A., et al. (2016) · ACI Concrete International · Cited by 76
Effects of mixing water temperatures on properties of one-part alkali-activated slag paste
Almakhadmeh, M., & Soliman, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121030 · Cited by 68
Choi, S. Y., & Lee, K.-M. (2019) · Materials · doi:10.3390/ma12132072 · Cited by 58
Effect of Dosage of Alkaline Activator on the Properties of Alkali‐Activated Slag Pastes
Jiao, Z., Wang, Y., Zheng, W., & Huang, W. (2018) · Advances in Materials Science and Engineering · doi:10.1155/2018/8407380 · Cited by 53
Sankar, K., Stynoski, P. B., Al‐Chaar, G. K., & Kriven, W. M. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.15391 · Cited by 50
Vance, K., Aguayo, M., Dakhane, A., Ravikumar, D., Jain, J. A., & Neithalath, N. (2014) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-014-0082-3 · Cited by 46
High-temperature performance of ambient-cured alkali-activated binder concrete
Ramagiri, K. K., Chauhan, D. R., Gupta, S., Kar, A., Adak, D., & Mukherjee, A. (2021) · Innovative Infrastructure Solutions · doi:10.1007/s41062-020-00448-y · Cited by 40
Effect of various alkalis on hydration properties of alkali-activated slag cements
Liu, S., Li, Q., & Han, W. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6789-z · Cited by 37
Fly ash glass chemistry and inorganic polymer cements
Keyte, L. M. (2009) · Elsevier eBooks · doi:10.1533/9781845696382.1.15 · Cited by 34
Strength and Microstructural Properties of Water Glass Activated Slag
Qing-Hua, C., Tagnit‐Hamou, A., & Sarkar, S. L. (1991) · MRS Proceedings · doi:10.1557/proc-245-49 · Cited by 32
The Structure of Silicate Anions in Aqueous Alkaline Solutions
Knight, C. T. G., Balec, R. J., & Kinrade, S. D. (2007) · Angewandte Chemie · doi:10.1002/ange.200702986 · Cited by 31
Ganta, M., Baskar, R., & Jyosyula, S. K. R. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.07.634 · Cited by 28
Alkali Activation of a Norwegian Granulated Blast-Furnace Slag
Gjørv, O. E. (1989) · doi:10.14359/1862 · Cited by 19
Metadata
- Authors
- Sun, B., Ye, G., & de Schutter, G.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2022-04
- Volume
- 326
- Pages
- 126843
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W4213165550
- Cited by
- 386
- References
- 154
- FWCI
- 33.02
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.