Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology
Open accessThe DOI matches its Crossref record; 163 of the 163 references it cites were found in a registry or an index.
Abstract
Polymer electrolyte membrane (PEM) fuel cells are electrochemical devices that directly convert the chemical energy stored in fuel into electrical energy with a practical conversion efficiency as high as 65%. In the past years, significant progress has been made in PEM fuel cell commercialization. By 2019, there were over 19,000 fuel cell electric vehicles (FCEV) and 340 hydrogen refueling stations (HRF) in the U.S. (~8,000 and 44, respectively), Japan (~3,600 and 112, respectively), South Korea (~5,000 and 34, respectively), Europe (~2,500 and 140, respectively), and China (~110 and 12, respectively). Japan, South Korea, and China plan to build approximately 3,000 HRF stations by 2030. In 2019, Hyundai Nexo and Toyota Mirai accounted for approximately 63% and 32% of the total sales, with a driving range of 380 and 312 miles and a mile per gallon (MPGe) of 65 and 67, respectively. Fundamentals of PEM fuel cells play a crucial role in the technological advancement to improve fuel cell performance/durability and reduce cost. Several key aspects for fuel cell design, operational control, and material development, such as durability, electrocatalyst materials, water and thermal management, dynamic operation, and cold start, are briefly explained in this work. Machine learning and artificial intelligence (AI) have received increasing attention in material/energy development. This review also discusses their applications and potential in the development of fundamental knowledge and correlations, material selection and improvement, cell design and optimization, system control, power management, and monitoring of operation health for PEM fuel cells, along with main physics in PEM fuel cells for physics-informed machine learning. The objective of this review is three fold: (1) to present the most recent status of PEM fuel cell applications in the portable, stationary, and transportation sectors; (2) to describe the important fundamentals for the further advancement of fuel cell technology in terms of design and control optimization, cost reduction, and durability improvement; and (3) to explain machine learning, physics-informed deep learning, and AI methods and describe their significant potentials in PEM fuel cell research and development (R&D).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
(1990) · Choice Reviews Online · doi:10.5860/choice.27-3338 · Cited by 35,305
Learning representations by back-propagating errors
Rumelhart, D. E., Hinton, G. E., & Williams, R. J. (1986) · Nature · doi:10.1038/323533a0 · Cited by 31,892
Reducing the dimensionality of data with neural networks
Hinton, G. E., & Salakhutdinov, R. R. (2006) · Science · doi:10.1126/science.1127647 · Cited by 20,928
Hosmer, D. W., & Lemeshow, S. (2000) · doi:10.1002/0471722146 · Cited by 20,302
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
(2005) · Proceedings of the Water Environment Federation · doi:10.2175/193864705783867675 · Cited by 6,678
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Machine learning for molecular and materials science
Butler, K. T., Davies, D. W., Cartwright, H., Isayev, O., & Walsh, A. (2018) · Nature · doi:10.1038/s41586-018-0337-2 · Cited by 4,968
High-Performance Electrocatalysts for Oxygen Reduction Derived from Polyaniline, Iron, and Cobalt
Wu, G., More, K. L., Johnston, C. M., & Zelenay, P. (2011) · Science · doi:10.1126/science.1200832 · Cited by 3,984
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
Self-citationHandbook of fuel cells: fundamentals, technology, and applications
(2003) · Focus on Catalysts · doi:10.1016/s1351-4180(03)00850-x · Cited by 3,324
ASME International Mechanical Engineering Congress and Exposition
(2001) · The Journal of the Acoustical Society of America · doi:10.1121/1.4776777 · Cited by 2,619
The catalytic decomposition of hydrogen peroxide by iron salts
Haber, F., & Weiss, J. (1934) · Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences · doi:10.1098/rspa.1934.0221 · Cited by 2,571
Capillary Behavior in Porous Solids
Leverett, M. C. (1941) · Transactions of the AIME · doi:10.2118/941152-g · Cited by 2,248
Hidden fluid mechanics: Learning velocity and pressure fields from flow visualizations
Raissi, M., Yazdani, A., & Karniadakis, G. E. (2020) · Science · doi:10.1126/science.aaw4741 · Cited by 2,103
Review and analysis of PEM fuel cell design and manufacturing
Mehta, V., & Cooper, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00542-6 · Cited by 1,685
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Materials, technological status, and fundamentals of PEM fuel cells – A review
Wang, Y., Ruiz Diaz, D. F., Chen, K. S., Wang, Z., & Adroher, X. C. (2020) · Materials Today · doi:10.1016/j.mattod.2019.06.005 · Cited by 1,419
Self-citationCarbon: Electrochemical and Physicochemical Properties
Kinoshita, K. (1988) · Medical Entomology and Zoology · Cited by 1,367
Carbon—Electrochemical and Physicochemical Properties
Brown, O. R. (1989) · Electrochimica Acta · doi:10.1016/0013-4686(89)87066-5 · Cited by 1,211
Water transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
Self-citationThe "Wake-Sleep" Algorithm for Unsupervised Neural Networks
Hinton, G. E., Dayan, P., Frey, B. J., & Neal, R. M. (1995) · Science · doi:10.1126/science.7761831 · Cited by 1,070
Review: Durability and Degradation Issues of PEM Fuel Cell Components
de Bruijn, F. A., Dam, V. A. T., & Janssen, G. J. M. (2008) · Fuel Cells · doi:10.1002/fuce.200700053 · Cited by 1,001
Instability of Supported Platinum Nanoparticles in Low-Temperature Fuel Cells
Shao-Horn, Y., Sheng, W. C., Chen, S., Ferreira, P. J., Holby, E. F., & Morgan, D. (2007) · Topics in Catalysis · doi:10.1007/s11244-007-9000-0 · Cited by 939
Ptychographic X-ray computed tomography at the nanoscale
Dierolf, M., Menzel, A., Thibault, P., Schneider, P., Kewish, C. M., Wepf, R., Bunk, O., & Pfeiffer, F. (2010) · Nature · doi:10.1038/nature09419 · Cited by 926
Advanced materials for improved PEMFC performance and life
Curtin, D. E., Lousenberg, R. D., Henry, T. J., Tangeman, P. C., & Tisack, M. E. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.01.023 · Cited by 786
Aging mechanisms and lifetime of PEFC and DMFC
Knights, S. D., Colbow, K. M., St-Pierre, J., & Wilkinson, D. P. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.033 · Cited by 753
Review of Advanced Materials for Proton Exchange Membrane Fuel Cells
Kraytsberg, A., & Ein-Eli, Y. (2014) · Energy & Fuels · doi:10.1021/ef501977k · Cited by 705
Toyota MIRAI Fuel Cell Vehicle and Progress Toward a Future Hydrogen Society
Yoshida, T., & Kojima, K. (2015) · Interface magazine · doi:10.1149/2.f03152if · Cited by 690
Banham, D., & Ye, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00644 · Cited by 583
Degradation of polymer electrolyte membranes
COLLIER, A., WANG, H., ZIYUAN, X., ZHANG, J., & WILKINSON, D. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.05.006 · Cited by 538
Effects of Microporous Layers in Polymer Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1861194 · Cited by 487
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Towards a comprehensive understanding of platinum dissolution in acidic media
Topalov, A. A., Cherevko, S., Zeradjanin, A. R., Meier, J. C., Katsounaros, I., & Mayrhofer, K. J. J. (2014) · Chem. Sci. · doi:10.1039/c3sc52411f · Cited by 470
A review of recent development: Transport and performance modeling of PEM fuel cells
Wu, H.-W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.075 · Cited by 444
Current status of automotive fuel cells for sustainable transport
Pollet, B. G., Kocha, S. S., & Staffell, I. (2019) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2019.04.021 · Cited by 438
Zatoń, M., Rozière, J., & Jones, D. J. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00038c · Cited by 435
Recent developments in catalyst-related PEM fuel cell durability
Borup, R. L., Kusoglu, A., Neyerlin, K. C., Mukundan, R., Ahluwalia, R. K., Cullen, D. A., More, K. L., Weber, A. Z., & Myers, D. J. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.02.007 · Cited by 432
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell
Berning, T., & Djilali, N. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1621412 · Cited by 409
Data-driven proton exchange membrane fuel cell degradation predication through deep learning method
Ma, R., Yang, T., Breaz, E., Li, Z., Briois, P., & Gao, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.111 · Cited by 408
Polymer Electrolyte Fuel Cell Durability
(2009) · Springer eBooks · doi:10.1007/978-0-387-85536-3 · Cited by 396
Aspects of the Chemical Degradation of PFSA Ionomers used in PEM Fuel Cells
Healy, J., Hayden, C., Xie, T., Olson, K., Waldo, R., Brundage, M., Gasteiger, H., & Abbott, J. (2005) · Fuel Cells · doi:10.1002/fuce.200400050 · Cited by 384
Improvement of water management by a microporous sublayer for PEM fuel cells
Qi, Z., & Kaufman, A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00058-7 · Cited by 371
Non precious metal catalysts for the PEM fuel cell cathode
Othman, R., Dicks, A. L., & Zhu, Z. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.08.095 · Cited by 359
Mesostructured thin films as electrocatalysts with tunable composition and surface morphology
van der Vliet, D. F., Wang, C., Tripkovic, D., Strmcnik, D., Zhang, X. F., Debe, M. K., Atanasoski, R. T., Markovic, N. M., & Stamenkovic, V. R. (2012) · Nature Materials · doi:10.1038/nmat3457 · Cited by 356
Cold start of proton exchange membrane fuel cell
Luo, Y., & Jiao, K. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.10.003 · Cited by 353
Self-citationEnabling Health Monitoring Approach Based on Vibration Data for Accurate Prognostics
Javed, K., Gouriveau, R., Zerhouni, N., & Nectoux, P. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327917 · Cited by 351
Recent Trends in Fuel Cell Science and Technology
(2007) · Springer eBooks · doi:10.1007/978-0-387-68815-2 · Cited by 345
Learning internal representations by back-propagating errors
Rumelhart, D. E. (1986) · Medical Entomology and Zoology · Cited by 337
Machine learning for renewable energy materials
Gu, G. H., Noh, J., Kim, I., & Jung, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta02356a · Cited by 311
Transient analysis of polymer electrolyte fuel cells
Wang, Y., & Wang, C.-Y. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2004.08.022 · Cited by 310
Self-citationEffect of Ammonia as Potential Fuel Impurity on Proton Exchange Membrane Fuel Cell Performance
Uribe, F. A., Gottesfeld, S., & Zawodzinski, T. A. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1447221 · Cited by 306
Prognostics of PEM fuel cell in a particle filtering framework
Jouin, M., Gouriveau, R., Hissel, D., Péra, M.-C., & Zerhouni, N. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.10.054 · Cited by 290
On the role of the microporous layer in PEMFC operation
Gostick, J. T., Ioannidis, M. A., Fowler, M. W., & Pritzker, M. D. (2009) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.12.053 · Cited by 276
Gas-diffusion-layer structural properties under compression via X-ray tomography
Zenyuk, I. V., Parkinson, D. Y., Connolly, L. G., & Weber, A. Z. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.020 · Cited by 269
A review on prognostics and health monitoring of proton exchange membrane fuel cell
Sutharssan, T., Montalvao, D., Chen, Y. K., Wang, W.-C., Pisac, C., & Elemara, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.009 · Cited by 269
Fujimura, K., Seko, A., Koyama, Y., Kuwabara, A., Kishida, I., Shitara, K., Fisher, C. A. J., Moriwake, H., & Tanaka, I. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300060 · Cited by 244
Shabani, B., Hafttananian, M., Khamani, S., Ramiar, A., & Ranjbar, A. A. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.03.097 · Cited by 244
Multiphase Flow and Heat Transfer in Porous Media
Wang, C. Y., & Cheng, P. (1997) · Advances in Heat Transfer · doi:10.1016/s0065-2717(08)70251-x · Cited by 233
Ghassemzadeh, L., Kreuer, K.-D., Maier, J., & Müller, K. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp102533v · Cited by 222
Zhu, X., Yan, J., Gu, M., Liu, T., Dai, Y., Gu, Y., & Li, Y. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b03392 · Cited by 219
Afshari, E., Mosharaf‐Dehkordi, M., & Rajabian, H. (2016) · Energy · doi:10.1016/j.energy.2016.10.101 · Cited by 218
Wang, B., Xie, B., Xuan, J., & Jiao, K. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112460 · Cited by 215
Self-citationEffect of contaminants on polymer electrolyte membrane fuel cells
Zamel, N., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.003 · Cited by 212
Self-citationWang, B., Zhang, G., Wang, H., Xuan, J., & Jiao, K. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100004 · Cited by 211
Self-citationStructure/property relationship of Nafion XL composite membranes
Shi, S., Weber, A. Z., & Kusoglu, A. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.06.004 · Cited by 209
Pianca, M., Barchiesi, E., Esposto, G., & Radice, S. (1999) · Journal of Fluorine Chemistry · doi:10.1016/s0022-1139(98)00304-2 · Cited by 207
Ahmad, T., & Chen, H. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.102010 · Cited by 200
Atiyeh, H. K., Karan, K., Peppley, B., Phoenix, A., Halliop, E., & Pharoah, J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.016 · Cited by 191
Dynamics of polymer electrolyte fuel cells undergoing load changes
Wang, Y., & Wang, C.-Y. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.11.005 · Cited by 189
Self-citationFeature selection in machine learning prediction systems for renewable energy applications
Salcedo-Sanz, S., Cornejo-Bueno, L., Prieto, L., Paredes, D., & García-Herrera, R. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.008 · Cited by 188
A Universal Machine Learning Algorithm for Large-Scale Screening of Materials
Fanourgakis, G. S., Gkagkas, K., Tylianakis, E., & Froudakis, G. E. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b11084 · Cited by 180
Microscale Tomography Investigations of Heterogeneous Porosity Distributions of PEMFC GDLs
Fishman, Z., Hinebaugh, J., & Bazylak, A. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3481443 · Cited by 177
Nagai, Y., Eller, J., Hatanaka, T., Yamaguchi, S., Kato, S., Kato, A., Marone, F., Xu, H., & Büchi, F. N. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226809 · Cited by 175
Flückiger, R., Marone, F., Stampanoni, M., Wokaun, A., & Büchi, F. N. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2010.12.016 · Cited by 173
Degradation prediction of PEM fuel cell using a moving window based hybrid prognostic approach
Zhou, D., Gao, F., Breaz, E., Ravey, A., & Miraoui, A. (2017) · Energy · doi:10.1016/j.energy.2017.07.096 · Cited by 168
Park, J., Oh, H., Lee, Y., Min, K., Lee, E., & Jyoung, J.-Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.132 · Cited by 164
Diffusion media materials and characterisation
Mathias, M. F., Roth, J., Fleming, J., & Lehnert, W. (2010) · Handbook of Fuel Cells · doi:10.1002/9780470974001.f303046 · Cited by 162
Chen, K., Laghrouche, S., & Djerdir, A. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.045 · Cited by 162
Ferreira, R. B., Falcão, D. S., Oliveira, V. B., & Pinto, A. M. F. R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.124 · Cited by 160
Zhang, G., Yuan, H. S., Wang, Y., & Jiao, K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113865 · Cited by 156
Self-citationLévêque, F. (2021) · Energy, COVID, and Climate Change,1st IAEE Online Conference,June 7-9, 2021 · Cited by 153
Proton exchange membrane fuel cell ageing forecasting algorithm based on Echo State Network
Morando, S., Jemeï, S., Hissel, D., Gouriveau, R., & Noureddine Zerhouni, A. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.286 · Cited by 150
Cho, S. C., Wang, Y., & Chen, K. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.057 · Cited by 149
Self-citationTwo-Phase Transients of Polymer Electrolyte Fuel Cells
Wang, Y., & Wang, C. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2734076 · Cited by 148
Self-citationTwo-phase flow in the mixed-wettability gas diffusion layer of proton exchange membrane fuel cells
Niu, Z., Bao, Z., Wu, J., Wang, Y., & Jiao, K. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.209 · Cited by 147
Self-citationA Review on Cold Start of Proton Exchange Membrane Fuel Cells
Wan, Z., Chang, H., Shu, S., Wang, Y., & Tang, H. (2014) · Energies · doi:10.3390/en7053179 · Cited by 145
Self-citationPerfluorinated Polymer Electrolyte Membrane Durability
Schiraldi, D. A. (2006) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583720600796458 · Cited by 143
Polymer Electrolyte Fuel Cell Durability
Schiraldi, D. A. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900508 · Cited by 143
Han, I.-S., & Chung, C.-B. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.04.247 · Cited by 141
Markötter, H., Haußmann, J., Alink, R., Tötzke, C., Arlt, T., Klages, M., Riesemeier, H., Scholta, J., Gerteisen, D., Banhart, J., et al. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.04.006 · Cited by 138
Review on microstructure modelling of a gas diffusion layer for proton exchange membrane fuel cells
Fadzillah, D. M., Rosli, M. I., Talib, M. Z. M., Kamarudin, S. K., & Daud, W. R. W. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.235 · Cited by 138
Effects of Catalyst Carbon Support on Proton Conduction and Cathode Performance in PEM Fuel Cells
Liu, Y., Ji, C., Gu, W., Jorné, J., & Gasteiger, H. A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3562945 · Cited by 132
Simon, C., Kartouzian, D., Müller, D. C., Wilhelm, F., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1321714jes · Cited by 131
Cold start of polymer electrolyte fuel cells: Three-stage startup characterization
Wang, Y., Mukherjee, P. P., Mishler, J., Mukundan, R., & Borup, R. L. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.12.029 · Cited by 125
Self-citationThe preparation of Pt/C catalysts using various carbon materials for the cathode of PEMFC
Kim, M., Park, J.-N., Kim, H., Song, S., & Lee, W. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.05.057 · Cited by 114
Analysis of the Key Parameters in the Cold Start of Polymer Electrolyte Fuel Cells
Wang, Y. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2767849 · Cited by 112
Self-citationHigh power fuel cell simulator based on artificial neural network
Chávez-Ramírez, A. U., Muñoz, R., Durón-Torres, S. M., Ferraro, M., Brunaccini, G., Sergi, F., Antonucci, V., & Arriaga, L. G. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.09.071 · Cited by 111
Ko, J., & Ju, H. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.02.007 · Cited by 108
Niu, Z., Wu, J., Bao, Z., Wang, Y., Yin, Y. S., & Jiao, K. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.05.008 · Cited by 107
Self-citationYasuda, T., Nakamura, S.-I., Honda, Y., Kinugawa, K., Lee, S.-Y., & Watanabe, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300031k · Cited by 103
PEMFC Residual Life Prediction Using Sparse Autoencoder-Based Deep Neural Network
Liu, J., Li, Q., Han, Y., Zhang, G., Meng, X. Y., Yu, J., & Chen, W. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2946065 · Cited by 102
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Polymer Design Strategies for Radiation‐Grafted Fuel Cell Membranes
Gubler, L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300827 · Cited by 96
Wavelets-based approach for online Fuel Cells Remaining Useful lifetime Prediction
Ibrahim, M., Steiner, N. Y., Jemeï, S., & Hissel, D. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2547358 · Cited by 94
Liu, X., Peng, F., Lou, G., & Wen, Z. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.092 · Cited by 93
Zamel, N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.091 · Cited by 93
Self-citationNiu, Z., Wang, Y., Jiao, K., & Wu, J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0261809jes · Cited by 91
Self-citationCho, S. C., Wang, Y., & Chen, K. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.033 · Cited by 88
Self-citationMaximum power cold start mode of proton exchange membrane fuel cell
Du, Q., Jia, B., Luo, Y., Chen, J., Zhou, Y., & Jiao, K. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.03.056 · Cited by 88
Self-citationZamel, N., Litovsky, E. Y., Shakhshir, S. A., Li, X., & Kleiman, J. I. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.02.037 · Cited by 86
Self-citationSubfreezing operation of polymer electrolyte fuel cells: Ice formation and cell performance loss
Mishler, J., Wang, Y., Mukherjee, P. P., Mukundan, R., & Borup, R. L. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.01.020 · Cited by 85
Self-citationStochastic modeling and direct simulation of the diffusion media for polymer electrolyte fuel cells
Wang, Y., Cho, S., Thiedmann, R., Schmidt, V., Lehnert, W., & Feng, X. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.10.044 · Cited by 84
Self-citationWargo, E. A., Schulz, V. P., Cecen, A., Kalidindi, S. R., & Kumbur, E. C. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.09.008 · Cited by 84
Cho, J., Park, J., Oh, H., Min, K., Lee, E., & Jyoung, J.-Y. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.022 · Cited by 81
Ge, N., Chevalier, S., Lee, J., Yip, R., Banerjee, R., George, M. G., Liu, H., Lee, C., Fazeli, M., Antonacci, P., et al. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.11.045 · Cited by 81
Achieving breakthrough performance caused by optimized metal foam flow field in fuel cells
Park, J. E., Hwang, W., Lim, M. S., Kim, S., Ahn, C., Kim, O., Shim, J., Lee, D. W., Lee, J. H., Cho, Y., et al. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.06.073 · Cited by 76
Alrwashdeh, S. S., Manke, I., Markötter, H., Haußmann, J., Kardjilov, N., Hilger, A., Kermani, M. J., Klages, M., Al-Falahat, A. M., Scholta, J., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.032 · Cited by 74
Porous-Media Flow Fields for Polymer Electrolyte Fuel Cells
Wang, Y. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3183785 · Cited by 73
Self-citationPorous-Media Flow Fields for Polymer Electrolyte Fuel Cells
Wang, Y. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3183781 · Cited by 73
Self-citationMayur, M., Gérard, M., Schott, P., & Bessler, W. G. (2018) · Energies · doi:10.3390/en11082054 · Cited by 73
Gurau, V., & Mann, J. A. (2009) · SIAM Journal on Applied Mathematics · doi:10.1137/080727993 · Cited by 72
Markötter, H., Manke, I., Kühn, R., Arlt, T., Kardjilov, N., Hentschel, M., Kupsch, A., Lange, A., Hartnig, C., Scholta, J., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.043 · Cited by 72
Fast and Reliable State-of-Health Model of a PEM Cathode Catalyst Layer
Schneider, P., Sadeler, C., Scherzer, A.-C., Zamel, N., & Gerteisen, D. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0881904jes · Cited by 71
Self-citationArtificial intelligence and machine learning for targeted energy storage solutions
Barrett, D. H., & Haruna, A. B. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.02.002 · Cited by 71
Numerical modeling and simulation of PEM fuel cells: Progress and perspective
Song, G., & Meng, H. (2013) · Acta Mechanica Sinica · doi:10.1007/s10409-013-0037-y · Cited by 70
Modeling discharge deposit formation and its effect on lithium-air battery performance
Wang, Y. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.04.137 · Cited by 70
Self-citationKhajeh-Hosseini-Dalasm, N., Ahadian, S., Fushinobu, K., Okazaki, K., & Kawazoe, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.061 · Cited by 69
Cho, J., Oh, H., Park, J., Min, K., Lee, E., & Jyoung, J.-Y. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.10.041 · Cited by 65
Ko, J., & Ju, H. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.05.154 · Cited by 65
Wang, Y., & Feng, X. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2988763 · Cited by 64
Self-citationTwo-phase flow modeling for the cathode side of a polymer electrolyte fuel cell
Qin, C., Rensink, D., Fell, S., & Hassanizadeh, S. M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.095 · Cited by 64
Wang, Y., & Chen, K. S. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.015111jes · Cited by 61
Self-citationEffect of compression on pore size distribution and porosity of PEM fuel cell catalyst layers
Malekian, A., Salari, S., Stumper, J., et al. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.07.036 · Cited by 61
Impact of Liquid Water on Reactant Mass Transfer in PEM Fuel Cell Electrodes
Gostick, J. T., Ioannidis, M. A., Pritzker, M. D., & Fowler, M. W. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3291977 · Cited by 60
Analysis of the Reaction Rates in the Cathode Electrode of Polymer Electrolyte Fuel Cells
Wang, Y., & Feng, X. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3056057 · Cited by 60
Self-citationNumerical studies of cold-start phenomena in PEM fuel cells: A review
Meng, H., & Ruan, B. (2010) · International Journal of Energy Research · doi:10.1002/er.1730 · Cited by 55
Tsuneda, T., Singh, R. K., Iiyama, A., & Miyatake, K. (2017) · ACS Omega · doi:10.1021/acsomega.7b00594 · Cited by 55
Klages, M., Enz, S., Markötter, H., Manke, I., Kardjilov, N., & Scholta, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.196 · Cited by 53
Probing the water content in polymer electrolyte fuel cells using neutron radiography
Mishler, J., Wang, Y., Mukundan, R., Spendelow, J. S., Hussey, D. S., Jacobson, D. L., & Borup, R. L. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.04.040 · Cited by 50
Self-citationDynamic modelling of PEM fuel cell of power electric bicycle system
Kheirandish, A., Motlagh, F., Shafiabady, N., & Dahari, M. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.02.046 · Cited by 49
Adroher, X. C., & Wang, Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.076 · Cited by 47
Self-citationDirect Simulations of Pore-Scale Water Transport through Diffusion Media
Cetinbas, F. C., Ahluwalia, R., Shum, A. D., & Zenyuk, I. V. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0011907jes · Cited by 47
Cold-start of parallel and interdigitated flow-field polymer electrolyte membrane fuel cell
Santamaria, A. D., Bachman, J. C., & Park, J. W. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.164 · Cited by 45
Verma, A., & Pitchumani, R. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.08.126 · Cited by 45
Machine Learning Based Approaches to Accelerate Energy Materials Discovery and Optimization
Krishnamurthy, D., Weiland, H., Farimani, A. B., Antono, E., Green, J., & Viswanathan, V. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02278 · Cited by 43
FC-PAD: Fuel Cell Performance and Durability Consortium
Borup, R. L., USDOE Office of Energy Efficiency and Renewable Energy (EERE), & Weber, A. Z. (2018) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1505949 · Cited by 35
Alink, R., & Gerteisen, D. (2013) · Energies · doi:10.3390/en6094508 · Cited by 33
An Experimental Study of Polymer Electrolyte Fuel Cell Operation at Sub-Freezing Temperatures
Mishler, J., Wang, Y., Lujan, R. W., Mukundan, R., & Borup, R. L. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.051306jes · Cited by 32
Self-citationUnderstanding PEM fuel cell dynamics: The reversal curve
Arias, I. K. P., Trinke, P., Hanke‐Rauschenbach, R., & Sundmacher, K. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.05.087 · Cited by 31
Prass, S., Friedrich, K. A., & Zamel, N. (2019) · Molecules · doi:10.3390/molecules24193514 · Cited by 31
Self-citationModeling Proton Exchange Membrane Fuel Cells—A Review
Demuren, A. O., & Edwards, R. L. (2020) · Springer eBooks · doi:10.1007/978-981-15-2670-1_15 · Cited by 31
Rasheed, R. K. A., Ehteshami, S. M. M., & Chan, S. H. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.11.103 · Cited by 29
Durability of Polymer Electrolyte Membrane Fuel Cells Operated at Subfreezing Temperatures
Macauley, N., Lujan, R. W., Spernjak, D., Hussey, D. S., Jacobson, D. L., More, K. L., Borup, R. L., & Mukundan, R. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0191613jes · Cited by 26
Multi-layer configuration for the cathode electrode of polymer electrolyte fuel cell
Feng, X., & Wang, Y. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.03.013 · Cited by 25
Self-citationSchneider, I., von Dahlen, S., Bayer, M. H., Boillat, P., Hildebrandt, M., Lehmann, E. H., Oberholzer, P., Scherer, G. G., & Wokaun, A. J. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp102259q · Cited by 23
Coupling of a continuum fuel cell model with a discrete liquid water percolation model
Alink, R., & Gerteisen, D. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.03.192 · Cited by 21
Probing nanoscale membrane degradation in fuel cells through electron tomography
Venkatesan, S. V., Hannach, M. E., Holdcroft, S., & Kjeang, E. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.05.073 · Cited by 21
Wang, Y., & Chen, K. S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.045 · Cited by 16
Self-citationDischarge Precipitate's Impact in Li-Air Battery: Comparison of Experiment and Model Predictions
Wang, Y., & Yuan, H. S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0271712jes · Cited by 9
Self-citationRapid Analysis of Platinum and Nafion Loadings Using Laser Induced Breakdown Spectroscopy
Wang, Y., Yu, J., Wu, J., & Wang, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0241713jes · Cited by 6
Self-citation
Cited by
Designing the next generation of proton-exchange membrane fuel cells
Jiao, K., Xuan, J., Du, Q., Bao, Z., Xie, B., Wang, B., Zhao, Y., Fan, L., Wang, H., Hou, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-03482-7 · Cited by 2,947
Self-citationPEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development – a review
Wang, Y., Pang, Y., Xu, H., Martinez, A., & Chen, K. S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00790h · Cited by 828
Self-citationAn overview: Current progress on hydrogen fuel cell vehicles
Aminudin, M. A., Kamarudin, S. K., Lim, B. H., Majilan, E. H., Masdar, M. S., & Shaari, N. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.10.156 · Cited by 797
The fuel cell electric vehicles: The highlight review
Pramuanjaroenkij, A., & Kakaç, S. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.11.103 · Cited by 469
Chen, Q., Zhang, G., Zhang, X., Sun, C., Jiao, K., & Wang, Y. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116496 · Cited by 298
Self-citation
Metadata
- Authors
- Wang, Y., Seo, B., Wang, B., Zamel, N., Jiao, K., & Adroher, X. C.
- Venue
- Energy and AI
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 1
- Pages
- 100014
- ISSN
- 2666-5468 (ISSN-L)
- OpenAlex
- W3038559317
- Cited by
- 484
- References
- 163
- FWCI
- 20.59
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.