The DOI matches its Crossref record; 106 of the 106 references it cites were found in a registry or an index.
Spray drying of pharmaceuticals and biopharmaceuticals: Critical parameters and experimental process optimization approaches
Abstract
Abstract Spray drying is increasingly becoming recognized as an efficient drying and formulation technique for pharmaceutical and biopharmaceutical processing. It offers significant economic and processing advantages compared to lyophilisation/freeze‐drying techniques even though the optimisation of process parameters is often a costly and time‐consuming procedure. Spray Drying has primarily been used in formulating small molecule drugs with low solubility however it is increasingly being applied to the processing of large biomolecules and biopharmaceuticals. This review examines the basics of spray drying process, current technology and various components used in spray drying process. Moreover, it is focused on introducing critical formulation and processing factors in spray drying of small molecule drugs and large biomolecules, their similarities and differences. Finally, it provides an overview of the experimental optimisation strategies designed to achieve optimum spray drying results in the shortest possible timeframe while utilising minimum product. Graphical abstract Figure. No Caption available.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Formation of Glasses from Liquids and Biopolymers
Angell, C. A. (1995) · Science · doi:10.1126/science.267.5206.1924 · Cited by 4,799
Kamlet, M. J., Abboud, J. L. M., Abraham, M. H., & Taft, R. W. (1983) · The Journal of Organic Chemistry · doi:10.1021/jo00165a018 · Cited by 3,428
Aerosol Technology Properties, Behavior, and Measurement of Airborne Particles
LAUCKS, M. L. (2000) · Journal of Aerosol Science · doi:10.1016/s0021-8502(99)00571-6 · Cited by 3,367
Improving drug solubility for oral delivery using solid dispersions
Leuner, C. (2000) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(00)00076-x · Cited by 2,574
Lefebvre, A. H., & McDonell, V. G. (2017) · CRC Press eBooks · doi:10.1201/9781315120911 · Cited by 2,444
Applications of spray-drying in microencapsulation of food ingredients: An overview
Gharsallaoui, A., Roudaut, G., Chambin, O., Voilley, A., & Saurel, R. (2007) · Food Research International · doi:10.1016/j.foodres.2007.07.004 · Cited by 2,422
Drug Solubility: Importance and Enhancement Techniques
Savjani, K. T., Gajjar, A. K., & Savjani, J. K. (2012) · ISRN Pharmaceutics · doi:10.5402/2012/195727 · Cited by 2,004
Pharmaceutical Applications of Solid Dispersion Systems
Chiou, W. L., & Riegelman, S. (1971) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.2600600902 · Cited by 1,799
Pharmaceutical Particle Engineering via Spray Drying
Vehring, R. (2008) · Pharmaceutical Research · doi:10.1007/s11095-007-9475-1 · Cited by 1,691
Serajuddin, A. T. M. (1999) · Journal of Pharmaceutical Sciences · doi:10.1021/js980403l · Cited by 1,648
Aerosol Technology : Properties, Behavior, and Measurement of Airborne Particles
Hinds, W. C. (1982) · Cited by 1,470
Kawabata, Y., Wada, K., Nakatani, M., Yamada, S., & Onoue, S. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.08.032 · Cited by 1,181
Lyophilization and development of solid protein pharmaceuticals
Wang, W. (2000) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(00)00423-3 · Cited by 1,175
Baghel, S., Cathcart, H., & O'Reilly, N. J. (2016) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2015.10.008 · Cited by 970
Taylor, L. S., & Zografi, G. (1997) · Pharmaceutical Research · doi:10.1023/a:1012167410376 · Cited by 903
Molecular Mobility of Amorphous Pharmaceutical Solids Below Their Glass Transition Temperatures
Hancock, B. C., Shamblin, S. L., & Zografi, G. (1995) · Pharmaceutical Research · doi:10.1023/a:1016292416526 · Cited by 889
Tonon, R. V., Brabet, C., & Hubinger, M. D. (2008) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2008.02.029 · Cited by 886
Vaccines: Correlates of Vaccine‐Induced Immunity
Plotkin, S. A. (2008) · Clinical Infectious Diseases · doi:10.1086/589862 · Cited by 829 · cited 1×
“Spray drying increases the stability of vaccines at ambient temperature (Plotkin, 2008).”
BackgroundAn infrared spectroscopic study of the interactions of carbohydrates with dried proteins
Carpenter, J. F., & Crowe, J. H. (1989) · Biochemistry · doi:10.1021/bi00435a044 · Cited by 758
Liversidge, G. G., & Cundy, K. C. (1995) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(95)00122-y · Cited by 739
MICROENCAPSULATION BY SPRAY DRYING
I Ré, M. (1998) · Drying Technology · doi:10.1080/07373939808917460 · Cited by 711
Particle formation in spray drying
Vehring, R., Foss, W. R., & Lechuga-Ballesteros, D. (2007) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2007.04.005 · Cited by 707
One-Factor-at-a-Time versus Designed Experiments
Czitrom, V. A. (1999) · The American Statistician · doi:10.1080/00031305.1999.10474445 · Cited by 699
Baird, J. A., Van Eerdenbrugh, B., & Taylor, L. S. (2010) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.22197 · Cited by 697
Solubility parameters as predictors of miscibility in solid dispersions
Greenhalgh, D. J., Williams, A. C., Timmins, P., & York, P. (1999) · Journal of Pharmaceutical Sciences · doi:10.1021/js9900856 · Cited by 674
Current trends and future perspectives of solid dispersions containing poorly water-soluble drugs
Vo, C. L.-N., Park, C., & Lee, B.-J. (2013) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2013.09.007 · Cited by 651
Particle Engineering for Pulmonary Drug Delivery
Chow, A. H. L., Tong, H. H. Y., Chattopadhyay, P., & Shekunov, B. Y. (2007) · Pharmaceutical Research · doi:10.1007/s11095-006-9174-3 · Cited by 645
Hydroxypropyl Methylcellulose Acetate Succinate-Based Spray-Dried Dispersions: An Overview
Friesen, D. T., Shanker, R., Crew, M., Smithey, D. T., Curatolo, W. J., & Nightingale, J. A. S. (2008) · Molecular Pharmaceutics · doi:10.1021/mp8000793 · Cited by 610
Phase relations and vitrification in saccharide-water solutions and the trehalose anomaly
Green, J. L., & Angell, C. A. (1989) · The Journal of Physical Chemistry · doi:10.1021/j100345a006 · Cited by 609
Juran on Quality by Design: The New Steps for Planning Quality into Goods and Services
Juran, J. M. (1992) · Cited by 608
Fundamental aspects of solid dispersion technology for poorly soluble drugs
Huang, Y., & Dai, W.-G. (2014) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2013.11.001 · Cited by 596
Theoretical and Practical Approaches for Prediction of Drug–Polymer Miscibility and Solubility
Marsac, P. J., Shamblin, S. L., & Taylor, L. S. (2006) · Pharmaceutical Research · doi:10.1007/s11095-006-9063-9 · Cited by 592
Van den Mooter, G. (2012) · Drug Discovery Today: Technologies · doi:10.1016/j.ddtec.2011.10.002 · Cited by 577
Ahlneck, C., & Zografi, G. (1990) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(90)90221-o · Cited by 554
Spray drying formulation of amorphous solid dispersions
Singh, A., & Van den Mooter, G. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.12.010 · Cited by 526
Evaluation of amorphous solid dispersion properties using thermal analysis techniques
Baird, J. A., & Taylor, L. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.07.009 · Cited by 512
Qian, F., Huang, J., & Hussain, M. A. (2010) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.22074 · Cited by 448
Impact of solid state properties on developability assessment of drug candidates
Huang, L. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2003.10.007 · Cited by 438
Spray Drying Technique. I: Hardware and Process Parameters
Cal, K., & Sollohub, K. (2010) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21886 · Cited by 402
Forster, A., Hempenstall, J., Tucker, I., & Rades, T. (2001) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00801-8 · Cited by 400 · cited 1×
“Calculating solubility parameters (Forster et al., 2001; Marsac et al., 2006), use of partition coefficients (Yoo et al.”
MethodAmorphous solid dispersions: Rational selection of a manufacturing process
Vasconcelos, T., Marques, S., das Neves, J., & Sarmento, B. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.01.012 · Cited by 380
Protein Inhalation Powders: Spray Drying vs Spray Freeze Drying
Maa, Y.-F., Nguyen, P.-A., Sweeney, T., Shire, S. J., & Hsu, C. C. (1999) · Pharmaceutical Research · doi:10.1023/a:1018828425184 · Cited by 356
Characterization of curcumin–PVP solid dispersion obtained by spray drying
Paradkar, A., Ambike, A. A., Jadhav, B. K., & Mahadik, K. R. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2003.11.014 · Cited by 340
Spray Drying of Biopharmaceuticals: Stability and Process Considerations
Ameri, M., & Maa, Y.-F. (2006) · Drying Technology · doi:10.1080/03602550600685275 · Cited by 300
Bosquillon, C., Lombry, C., Préat, V., & Vanbever, R. (2001) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00362-x · Cited by 296
Effect of Additives on Protein Aggregation
Hamada, H., Arakawa, T., & Shiraki, K. (2009) · Current Pharmaceutical Biotechnology · doi:10.2174/138920109788488941 · Cited by 248
Six, K., Verreck, G., Peeters, J., Brewster, M., & Mooter, G. V. D. (2004) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.10522 · Cited by 246
Multi-drug loaded polymeric micelles for simultaneous delivery of poorly soluble anticancer drugs
Shin, H.-C., Alani, A. W. G., Rao, D. A., Rockich, N. C., & Kwon, G. S. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.04.024 · Cited by 243
Pharmaceutical Dosage Forms - Tablets: Unit Operations and Mechanical Properties
(2008) · CRC Press eBooks · doi:10.3109/9781420020281 · Cited by 224
Spray drying: An overview on wall deposition, process and modeling
Keshani, S., Daud, W. R. W., Nourouzi, M. M., Namvar, F., & Ghasemi, M. (2015) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2014.09.004 · Cited by 221
Ståhl, K., Claesson, M., Lilliehorn, P., Lindén, H., & Bäckström, K. (2002) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00945-0 · Cited by 214
Spray-Drying of Air–Liquid Interface Sensitive Recombinant Human Growth Hormone
Maa, Y.-F., Nguyen, P.-A. T., & Hsu, S. W. (1998) · Journal of Pharmaceutical Sciences · doi:10.1021/js970308x · Cited by 211
Lee, S. C., Huh, K. M., Lee, J., Cho, Y. W., Galinsky, R. E., & Park, K. (2007) · Biomacromolecules · doi:10.1021/bm060307b · Cited by 206
Spray drying of siRNA-containing PLGA nanoparticles intended for inhalation
Jensen, D. M. K., Cun, D., Maltesen, M. J., Frokjaer, S., Nielsen, H. M., & Foged, C. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.10.010 · Cited by 201
Biopharmaceutical Powders Particle Formation and Formulation Considerations
Maa, Y.-F., & Prestrelski, S. (2000) · Current Pharmaceutical Biotechnology · doi:10.2174/1389201003378898 · Cited by 200
Amorphous Solid Dispersions: Theory and Practice
(2014) · Advances in Delivery Science and Technology · doi:10.1007/978-1-4939-1598-9 · Cited by 193
Andya, J. D., Maa, Y.-F., Costantino, H. R., Nguyen, P.-A., Dasovich, N., Sweeney, T. D., Hsu, C. C., & Shire, S. J. (1999) · Pharmaceutical Research · doi:10.1023/a:1018805232453 · Cited by 190
Formulating Poorly Water Soluble Drugs
(2012) · AAPS Advances in the Pharmaceutical Sciences Series · doi:10.1007/978-1-4614-1144-4 · Cited by 174
Application of Computational Fluid Dynamics for Simulation of Drying Processes: A Review
Jamaleddine, T. J., & Ray, M. B. (2010) · Drying Technology · doi:10.1080/07373930903517458 · Cited by 166
Polymeric micelles for drug delivery: solubilization and haemolytic activity of amphotericin B
Yu, B. G., Okano, T., Kataoka, K., & Kwon, G. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00245-9 · Cited by 165
Single droplet drying for optimal spray drying of enzymes and probiotics
Schutyser, M. A. I., Perdana, J., & Boom, R. M. (2012) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2012.05.006 · Cited by 157
Maury, M., MURPHY, K., KUMAR, S., Mauerer, A., & LEE, G. (2004) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2004.07.010 · Cited by 147
Sou, T., Kaminskas, L. M., Nguyen, T., et al. (2012) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2012.10.015 · Cited by 145
Heat-stable measles vaccine produced by spray drying
Ohtake, S., Martin, R. A., Yee, L., Chen, D., Kristensen, D. D., Lechuga‐Ballesteros, D., & Truong-Le, V. L. (2009) · Vaccine · doi:10.1016/j.vaccine.2009.11.024 · Cited by 140
Becket, G., Schep, L. J., & Tan, M. Y. (1999) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(98)00382-2 · Cited by 133
A novel spray-drying technique to produce low density particles for pulmonary delivery
Steckel, H., & Brandes, H. G. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.03.010 · Cited by 130
Aerosolization properties, surface composition and physical state of spray-dried protein powders
Bosquillon, C., Rouxhet, P. G., Ahimou, F., Simon, D., Culot, C., Véronique Préat, A., & Rita Vanbever, A. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.07.022 · Cited by 127
Huang, L., Kumar, K., & MUJUMDAR, A. S. (2004) · Drying Technology · doi:10.1081/drt-120038737 · Cited by 127
Spray-Dried Powders for Pulmonary Drug Delivery
Seville, P. C., Li, H., & Learoyd, T. P. (2007) · Critical Reviews in Therapeutic Drug Carrier Systems · doi:10.1615/critrevtherdrugcarriersyst.v24.i4.10 · Cited by 126
Development and Scale-up of a Microsphere Protein Delivery System
Tracy, M. A. (1998) · Biotechnology Progress · doi:10.1021/bp9701271 · Cited by 124
The Failure of Exubera: Are We Beating a Dead Horse?
Heinemann, L. (2008) · Journal of Diabetes Science and Technology · doi:10.1177/193229680800200325 · Cited by 122
Caron, V., Tajber, L., Corrigan, O. I., & Healy, A. M. (2011) · Molecular Pharmaceutics · doi:10.1021/mp1003674 · Cited by 115
Needle-free epidermal powder immunization
Chen, D., Maa, Y., & Haynes, J. R. (2002) · Expert Review of Vaccines · doi:10.1586/14760584.1.3.265 · Cited by 114
An investigation into lactose crystallization under high temperature conditions during spray drying
Islam, M., & Langrish, T. A. G. (2009) · Food Research International · doi:10.1016/j.foodres.2009.08.010 · Cited by 113
Systemic delivery of parathyroid hormone (1-34) using inhalation dry powders in rats
Codrons, V., Vanderbist, F., Verbeeck, R. K., Arras, M., Lison, D., Véronique Préat, A., & Rita Vanbever, A. (2003) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.10346 · Cited by 102
Direct Formation of Nanospheres from Amphiphilic β-Cyclodextrin Inclusion Complexes
Memiṣoǧlu, E., Bochot, A., Özalp, M., Şen, M., Duchêne, D., & Hıncal, A. A. (2003) · Pharmaceutical Research · doi:10.1023/a:1022263111961 · Cited by 101
Liposomes and disaccharides as carriers in spray-dried powder formulations of superoxide dismutase
Lo, Y., Tsai, J., & Kuo, J.-H. S. (2003) · Journal of Controlled Release · doi:10.1016/j.jconrel.2003.09.019 · Cited by 93
Miller, D. A., & Gil, M. (2011) · AAPS advances in the pharmaceutical sciences series · doi:10.1007/978-1-4614-1144-4_10 · Cited by 92
Tong, H. H. Y., Du, Z., Wang, G. N., Chan, H., Chang, Q., Lai, L. C. M., Chow, A. H. L., & Zheng, Y. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.11.027 · Cited by 85
Characterization of Ternary Solid Dispersions of Itraconazole, PEG 6000, and HPMC 2910 E5
Janssens, S., de Armas, H. N., Roberts, C. J., & den Mooter, G. V. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21128 · Cited by 82
Albadarin, A. B., Potter, C. B., Davis, M. T., Iqbal, J., Korde, S. K., Pagire, S. K., Paradkar, A. R., & Walker, G. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.035 · Cited by 80
Self-citationAmorphous Solid Dispersions or Prodrugs: Complementary Strategies to Increase Drug Absorption
Rumondor, A. C. F., Dhareshwar, S. S., & Kesisoglou, F. (2016) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2015.11.004 · Cited by 78
Cape, S. P., Villa, J. A., Huang, E. T. S., Yang, T., Carpenter, J. F., & Sievers, R. E. (2008) · Pharmaceutical Research · doi:10.1007/s11095-008-9575-6 · Cited by 77
LeClair, D. A., Cranston, E. D., Xing, Z., & Thompson, M. R. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-2003-4 · Cited by 72
Bonferoni, M. C., Riva, F., Invernizzi, A., Dellera, E., Sandri, G., Rossi, S., Marrubini, G., Bruni, G., Vigani, B., Caramella, C., et al. (2018) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2017.11.008 · Cited by 72
Comparison of particle sizing techniques in the case of inhalation dry powders
Bosquillon, C., Lombry, C., Véronique Préat, A., & Rita Vanbever, A. (2001) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.1154 · Cited by 70
Rational excipient selection for co-amorphous formulations
Korhonen, O., Pajula, K., & Laitinen, R. (2016) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2016.1198770 · Cited by 69
Characteristics of bovine lactoferrin powders produced through spray and freeze drying processes
Wang, B., Timilsena, Y. P., Blanch, E. W., & Adhikari, B. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.10.087 · Cited by 63
Chen, D., Kapre, S. V., Goel, A., Suresh, K., Beri, S., Hickling, J., Jensen, J., Lal, M., Préaud, J.-M., LaForce, M., et al. (2010) · Vaccine · doi:10.1016/j.vaccine.2010.04.112 · Cited by 59
Dufour, G., Bigazzi, W., Wong, N., Boschini, F., Tullio, P. D., Piel, G., Cataldo, D. D., & Évrard, B. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.09.052 · Cited by 58
Forced degradation studies: an essential tool for the formulation development of vaccines
Ausar, S. F., Hasija, Li, L., & Rahman (2013) · Vaccine Development and Therapy · doi:10.2147/vdt.s41998 · Cited by 58
Douglas, P., Albadarin, A. B., Sajjia, M., Mangwandi, C., Kuhs, M., Collins, M. N., & Walker, G. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.01.036 · Cited by 58
Self-citationHeat-Mass Transfer and Structure Formation During Drying of Single Food Droplets
Chen, X. D. (2004) · Drying Technology · doi:10.1081/drt-120028226 · Cited by 54
Theoretical Considerations in Developing Amorphous Solid Dispersions
Laitinen, R., Priemel, P. A., Surwase, S. A., Graeser, K. A., Strachan, C. J., Grohganz, H., & Rades, T. (2014) · Advances in delivery science and technology · doi:10.1007/978-1-4939-1598-9_2 · Cited by 53
Li, X., & Mansour, H. M. (2011) · AAPS PharmSciTech · doi:10.1208/s12249-011-9704-0 · Cited by 50
Neumiller, J. J., & Campbell, R. K. (2010) · BioDrugs · doi:10.2165/11536700-000000000-00000 · Cited by 45
Spray drying TB vaccines for pulmonary administration
Fourie, P. B., Germishuizen, W. A., Wong, Y.-L., & Edwards, D. A. (2008) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.8.7.857 · Cited by 42
Microencapsulated SLN: An innovative strategy for pulmonary protein delivery
Gaspar, D. P., Serra, C., Lino, P. R., Gonçalves, L., Taboada, P., Remuñán‐López, C., & Almeida, A. J. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.11.037 · Cited by 42
Solid dispersions of dihydroartemisinin in polyvinylpyrrolidone
Ansari, M. T., & Sunderland, V. B. (2008) · Archives of Pharmacal Research · doi:10.1007/s12272-001-1169-6 · Cited by 34
Nano-Liposomal Dry Powder Inhaler of Amiloride Hydrochloride
Chougule, M. B., Padhi, B. K., & Misra, A. R. (2006) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2006.405 · Cited by 34
Structured Development Approach for Amorphous Systems
Shah, N. H., Sandhu, H. K., Choi, D. S., Kalb, O., Page, S., & Wyttenbach, N. (2011) · AAPS advances in the pharmaceutical sciences series · doi:10.1007/978-1-4614-1144-4_8 · Cited by 31
Bioactive PCL matrices with a range of structural & rheological properties
Douglas, P., Kuhs, M., Sajjia, M., Khraisheh, M. A. M., Walker, G., Collins, M. N., & Albadarin, A. B. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.02.004 · Cited by 29
Self-citationWang, Z., & Meenach, S. A. (2017) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.07.022 · Cited by 26
Spray-Drying of Biopharmaceuticals
Ledet, G. A., Graves, R. A., Bostanian, L. A., & Mandal, T. K. (2015) · Springer eBooks · doi:10.1007/978-1-4939-2383-0_12 · Cited by 22
Lane, M. E., Brennan, F., & Corrigan, O. I. (2005) · Journal of Pharmacy and Pharmacology · doi:10.1211/0022357056406 · Cited by 17
Ross, S. S., Gharse, S., Sanchez, L., & Fiegel, J. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.08.060 · Cited by 13
Cited by
Polymeric Nanoparticles: Production, Characterization, Toxicology and Ecotoxicology
Zielińska, A., Carreiró, F., Oliveira, A. M., Neves, A., Pires, B., Venkatesh, D. N., Durazzo, A., Lucarini, M., Eder, P., Silva, A. M., et al. (2020) · Molecules · doi:10.3390/molecules25163731 · Cited by 1,560
Jakubowska, E., & Lulek, J. (2021) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2021.102357 · Cited by 83
Metadata
- Authors
- Ziaee, A., Albadarin, A. B., Padrela, L., Femmer, T., O'Reilly, E., & Walker, G.
- Venue
- European Journal of Pharmaceutical Sciences
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 127
- Pages
- 300-318
- ISSN
- 0928-0987 (ISSN-L)
- OpenAlex
- W2900173670
- Cited by
- 366
- References
- 106
- FWCI
- 22.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.