The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Design of cut unit geometry in hierarchical kirigami-based auxetic metamaterials for high stretchability and compressibility
Open accessAbstract
We studied the mechanical response of a recently developed new class of mechanical metamaterials based on the paper art of cutting, kirigami. Specially, the geometrical and structural design of representative cut units, via combined line cut, cut-out, and hierarchy of the structure, was explored for achieving both extreme stretchability and/or compressibility in kirigami metamaterials through experiments, alongside geometrical modeling and finite element simulations. The kirigami design was tested on constituent materials including non-stretchable copy papers and highly stretchable silicone rubber to explore the role of constituent material properties. The cut unit in the shape of solid rectangles with the square shape as a special case was demonstrated for achieving the extreme stretchability via rigid rotation of cut units. We found that compared to the square cut units, the theoretically predicted maximum stretchability via unit rotation in rectangle units (aspect ratio 2:1) increased dramatically from about 41% to 124% for the level 1 cut structure without hierarchy, and from about 62% to 156% for the level 2 hierarchical cut structure, which was validated by both experiments and simulations. To demonstrate the achievement of both extreme stretchability and compressibility, we replaced the solid square cut units with porous squares and re-entrant lattice shapes in silicone rubber based metamaterials. We found that a porous structure can enable an extreme compressibility of as high as 81%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Evans, K. E., Nkansah, M. A., HUTCHINSON, I. J., & ROGERS, S. C. (1991) · Nature · doi:10.1038/353124a0 · Cited by 1,290
Using origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Negative Poisson's Ratio Behavior Induced by an Elastic Instability
Bertoldi, K., Reis, P. M., Willshaw, S., & Mullin, T. (2010) · Advanced Materials · doi:10.1002/adma.200901956 · Cited by 903
3D Soft Metamaterials with Negative Poisson's Ratio
Babaee, S., Shim, J., Weaver, J. C., Chen, E. R., Patel, N., & Bertoldi, K. (2013) · Advanced Materials · doi:10.1002/adma.201301986 · Cited by 856
Programmable matter by folding
Hawkes, E., An, B., Benbernou, N. M., Tanaka, H., Kim, S., Demaine, E. D., Rus, D., & Wood, R. J. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0914069107 · Cited by 658
An elasto-mechanical unfeelability cloak made of pentamode metamaterials
Bückmann, T., Thiel, M., Kadic, M., Schittny, R., & Wegener, M. (2014) · Nature Communications · doi:10.1038/ncomms5130 · Cited by 623
Micro‐/Nanostructured Mechanical Metamaterials
Lee, J., Singer, J. P., & Thomas, E. L. (2012) · Advanced Materials · doi:10.1002/adma.201201644 · Cited by 559
A mechanically driven form of Kirigami as a route to 3D mesostructures in micro/nanomembranes
Zhang, Y., Yan, Z., Nan, K., Xiao, D., Liu, Y., Luan, H., Fu, H., Wang, X., Yang, Q., Wang, J., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1515602112 · Cited by 535
Reconfigurable Terahertz Metamaterials
Tao, H., Strikwerda, A. C., Fan, K., Padilla, W. J., Zhang, X., & Averitt, R. D. (2009) · Physical Review Letters · doi:10.1103/physrevlett.103.147401 · Cited by 523
Mechanical metamaterials with negative compressibility transitions
Nicolaou, Z. G., & Motter, A. E. (2012) · Nature Materials · doi:10.1038/nmat3331 · Cited by 522
Cited by
Auxetic metamaterials and structures: a review
Ren, X., Das, R., Tran, P., Ngo, T. D., & Xie, Y. M. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aaa61c · Cited by 1,277
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Auxetic mechanical metamaterials
Kolken, H. M. A., & Zadpoor, A. A. (2017) · RSC Advances · doi:10.1039/c6ra27333e · Cited by 788
Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review
Wu, W., Hu, W., Qian, G., Liao, H., Xu, X., & Berto, F. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107950 · Cited by 733
Materials and Structures toward Soft Electronics
Wang, C., Wang, C., Huang, Z., & Xu, S. (2018) · Advanced Materials · doi:10.1002/adma.201801368 · Cited by 662
From flat sheets to curved geometries: Origami and kirigami approaches
Callens, S. J. P., & Zadpoor, A. A. (2018) · Materials Today · doi:10.1016/j.mattod.2017.10.004 · Cited by 433
Mechanical performance of additively manufactured meta-biomaterials
Zadpoor, A. A. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.038 · Cited by 429
Stretchable electronics: functional materials, fabrication strategies and applications
Wu, W. (2019) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1549460 · Cited by 347
Programming shape using kirigami tessellations
Choi, G. P. T., Dudte, L. H., & Mahadevan, L. (2019) · Nature Materials · doi:10.1038/s41563-019-0452-y · Cited by 332
Mechanically‐Guided Structural Designs in Stretchable Inorganic Electronics
Xue, Z., Song, H., Rogers, J. A., Zhang, Y., & Huang, Y. (2020) · Advanced Materials · doi:10.1002/adma.201902254 · Cited by 314
Mechanical metamaterials based on origami and kirigami
Zhai, Z., Wu, L., & Jiang, H. (2021) · Applied Physics Reviews · doi:10.1063/5.0051088 · Cited by 279
Ning, X., Wang, X., Zhang, Y., Yu, X., Choi, D., Zheng, N., Kim, D. S., Huang, Y., Zhang, Y., & Rogers, J. A. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800284 · Cited by 273
Li, Z., Liu, Y., Hossain, O., Paul, R., Yao, S., Wu, S., Ristaino, J. B., Zhu, Y., & Wei, Q. (2021) · Matter · doi:10.1016/j.matt.2021.06.009 · Cited by 262
Recent advances in recording and modulation technologies for next-generation neural interfaces.
Hong, J.-W., Yoon, C., Jo, K., Won, J. H., & Park, S. (2021) · iScience · doi:10.1016/j.isci.2021.103550 · Cited by 25
Liu, S., Ha, T., & Lu, N. (2019) · Journal of Applied Mechanics · doi:10.1115/1.4042570 · Cited by 19
Metadata
- Authors
- Tang, Y., & Yin, J.
- Venue
- Extreme Mechanics Letters
- Publisher
- Elsevier BV
- Published
- 2017-04
- Volume
- 12
- Pages
- 77-85
- ISSN
- 2352-4316 (ISSN-L)
- OpenAlex
- W2496467096
- Cited by
- 267
- References
- 24
- FWCI
- 16.53
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.